GVGleb Vdovin

Gleb Vdovin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gleb Vdovin has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Subjective adaptive correction of the aberrations of the human eye

    by Gleb Vdovin, M. Loktev, A. Simonov, Song Hong, V. Kiyko, S. Volkov

    We designed and built an experimental setup for subjective (manually controlled) correction of up to 12 orthogonal terms (excluding tilts and defocus) of the aberration of the human eye. In our experiments, the subject was looking through an adaptive optical system at the USAF resolution chart. By using the arrow keys of the computer keyboard, the subject was able to control the amplitudes of up to 12 orthogonal aberration terms, introduced by a deformable mirror, optically conjugated to the pupil of the eye. Preliminary statistical analysis on a group of 12 participants with 6 correction attempts per participant, demonstrated satisfactory correlation of aberration coefficients obtained by the same person in different correction attempts. The majority of the participants were able to improve the visual acuity by subjective optimization of the figure of the deformable mirror.

  • Adaptive correction of human-eye aberrations in a subjective feedback loop

    by G. Vdovin, M. Loktev, A. Simonov, V. Kijko, S. Volkov

    An adaptive optical system with a subjective feedback loop is used to improve the visual acuity and to determine the aberrations of the human eye. Corrections of as many as 12 low-order aberration modes were made, based on the perceived sharpness of the test object observed through the adaptive optical system. The acuity of vision was improved by adjustment of the weights of the orthogonal modes produced by a deformable mirror. Objective measurements of the correcting aspherical figures, obtained in independent subjective correction cycles for one person, demonstrated good repeatability. Participants in the study with strong ocular aberrations reported moderate to significant improvement of their visual acuity, estimated with the U.S. Air Force 1951 acuity chart.


  • Silicon micro-optics for smart light control

    by Gleb Vdovin, Davies W. de Lima Monteiro, Ourang Akhzar-Mehr, Mikhail Y. Loktev, Serhat Sakarya, Oleg Soloviev, Pasqualina M. Sarro

    We present an overview of the results of our recent research in the field of adaptive optical components based on silicon microtechnologies, including membrane deformable mirrors, spatial light modulators, liquid-crystal correctors, wavefront sensors, and both spherical and aspherical micro-optical components. We aim at the realization of adaptive optical systems using standard-technology solutions.

  • Technology of spatial light modulators based on viscoelastic layers

    by Serhat Sakarya, Gleb V. Vdovin, Lina Sarro

    We present a novel technology for spatial light modulators based on electrostatic deformation of viscoelastic layers. To fabricate the modulator structure, we bond two silicon chips using an intermediate viscoelastic layer and then etch away the top chip. This results in a very high optical quality viscoelastic layer deposited directly on top of the bottom chip. Light modulation is achieved by deforming the deposited viscoelastic layer using electrodes integrated into the bottom chip. Before bonding, the top chip is coated with a 80nm layer of aluminum and 50nm layer of nitride, that serves as the etch stop and reflector at the silicon. The thin nitride layer functions as the etch stop. Special technology was developed for low-stress side and back etch protection of contact pads of the devices. The continuous reflective membrane results in a 100% optical fill factor, enabling the modulator to handle relatively high optical loads. Also, given a sufficient bias voltage, the voltages on the electrodes should be in the range of 15-30V, making integrated solutions possible. Applications lie in the field of optical communication networks and projection displays.


  • Deformable mirror with thermal actuators

    by Gleb Vdovin, Mikhail Loktev

    Low-cost adaptive optics is applied in lasers, scientific instrumentation, ultrafast sciences, and ophthalmology. These applications demand that the deformable mirrors used be simple, inexpensive, reliable, and efficient. We report a novel type of ultralow-cost deformable mirror with thermal actuators. The device has a response time of ∼5 s, an actuator stroke of ∼6 µm, and temporal stability of ∼λ/10 rms in the visible range and can be used for correction of rather large aberrations with slow-changing amplitude.


  • Intracavity control of a 200-W continuous-wave Nd:YAG laser by a micromachined deformable mirror

    by Gleb Vdovin, Vadim Kiyko

    A silicon micromachined membrane deformable mirror with a diameter of 10 mm, reflectivity of better than 99.8%, and a surface deflection range of 3 μm has been used for intracavity control of an industrial 200-W cw Nd:YAG laser. When it was placed in the resonator, the mirror demonstrated continuous (more than 40-h) stable operation under an ∼550‐W cw optical load, with beam diameters in the range 3–6 mm. Periodic modulation of the curvature of the deformable mirror with a frequency of 250 Hz produced quick switching between stable and unstable resonator configurations, which resulted in pulse-period Q-switched generation with average power in the range 50–200 W, modulation depth from 95% to 10%, and an M2 parameter of 6.5 to 30.