Martin Hÿtch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Martin Hÿtch has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Alain Claverie
CEMES-CNRS, 29 rue Jeanne Marvig, 31055 Toulouse, France
3 shared publications Florent Houdellier
CEMES/CNRS and Université de Toulouse, nMat Group, 29 rue J. Marvig, 31055 Toulouse, France
3 shared publicationsFlorian Hüe
Centre National de la Recherche Scientifique
3 shared publications- Nikolay Cherkashin
Université de Toulouse, CNRS, CEMES
3 shared publications Alain Claverie
CEMES/CNRS and Université de Toulouse, nMat Group, 29 rue J. Marvig, 31055 Toulouse, France
2 shared publicationsE. Snoeck
2 shared publications
Latest Publications
- Open Access
- 20 December 2016
- Published by Wiley
- p. 515-516
Mapping 2D strain components from STEM moiré fringes
Artificial moirés are created in a STEM by deliberately choosing a low magnification where the scan step is close to the crystalline periodicity (see Figure 1a) [1]. A moiré contrast then results from the interference between the scan and the crystal lattice. The technique has been developed to analyse strain [2], and has been applied to the study of strained‐silicon devices [3]. In reciprocal space, STEM moiré fringes can be understood as the convolution of the lattice created by the scan, characterized by the scan‐step, s in real‐space, or s * in reciprocal space, and the reciprocal lattice of the crystalline lattice, characterized by d * (Figure 1b). Interference between neighbouring periodicities gives rise to moiré fringes of periodicity q M . In general, only a few moiré fringe periodicities will be present in the image as the scan reciprocal lattice is in reality multiplied by the MTF of the probe: the size of the probe limits the possible interference terms (indicated by the yellow area in Figure 1b). The moiré peridocity q M is related vectorially to s * , which is usually 1 or 2 pixel −1 , and the d * (or g‐vector) for a particular set of lattice fringes (Figure 1c). Here we show how the strain information can be extracted using the concept of geometric phase, previously used for the analysis of high‐resolution TEM images [4]. The advantage of this formulation is that the moiré fringes do not need to be aligned exactly with the crystalline lattice, thus freeing up the experimental work. The periodicity of the moiré fringes (Figure 2a) is identified from the power spectrum of the image and the corresponding geometric phase determined (Figure 2b). The strain is in turn calculated from the geometric phase (Figure 2c). It is not necessary to know the exact calibration of the original image providing a reference region of known crystal parameter is present, as the vectorial relationship (Figure 1c) provides a strong constraint. We have also developed a procedure to determine maps of the 2D strain tensor from two differently oriented SMFs [5] (Figure 3). The results from two separate moiré fringe images need to be aligned (Figure 3b) and combined to determine the full 2D in‐plane strain tensor. Whilst the examples here are simulated, we anticipate presenting experimental results from devices and piezo‐electric materials.
- 20 December 2016
- Published by Wiley
- p. 515-516
Open AccessMapping 2D strain components from STEM moiré fringes
Artificial moirés are created in a STEM by deliberately choosing a low magnification where the scan step is close to the crystalline periodicity (see Figure 1a) [1]. A moiré contrast then results from the interference between the scan and the crystal lattice. The technique has been developed to analyse strain [2], and has been applied to the study of strained‐silicon devices [3]. In reciprocal space, STEM moiré fringes can be understood as the convolution of the lattice created by the scan, characterized by the scan‐step, s in real‐space, or s * in reciprocal space, and the reciprocal lattice of the crystalline lattice, characterized by d * (Figure 1b). Interference between neighbouring periodicities gives rise to moiré fringes of periodicity q M . In general, only a few moiré fringe periodicities will be present in the image as the scan reciprocal lattice is in reality multiplied by the MTF of the probe: the size of the probe limits the possible interference terms (indicated by the yellow area in Figure 1b). The moiré peridocity q M is related vectorially to s * , which is usually 1 or 2 pixel −1 , and the d * (or g‐vector) for a particular set of lattice fringes (Figure 1c). Here we show how the strain information can be extracted using the concept of geometric phase, previously used for the analysis of high‐resolution TEM images [4]. The advantage of this formulation is that the moiré fringes do not need to be aligned exactly with the crystalline lattice, thus freeing up the experimental work. The periodicity of the moiré fringes (Figure 2a) is identified from the power spectrum of the image and the corresponding geometric phase determined (Figure 2b). The strain is in turn calculated from the geometric phase (Figure 2c). It is not necessary to know the exact calibration of the original image providing a reference region of known crystal parameter is present, as the vectorial relationship (Figure 1c) provides a strong constraint. We have also developed a procedure to determine maps of the 2D strain tensor from two differently oriented SMFs [5] (Figure 3). The results from two separate moiré fringe images need to be aligned (Figure 3b) and combined to determine the full 2D in‐plane strain tensor. Whilst the examples here are simulated, we anticipate presenting experimental results from devices and piezo‐electric materials.
- Open Access
- 22 August 2011
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section A Foundations of Crystallography
- Vol. 67 (a1) , C106
Measuring lattice distortions from HR(S)TEM images
- 22 August 2011
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section A Foundations of Crystallography
- Vol. 67 (a1) , C106
Open AccessMeasuring lattice distortions from HR(S)TEM images
- 1 July 2011
- Published by Elsevier in Ultramicroscopy
- Vol. 111 (8) , 1328-1337
Dark-field electron holography for the measurement of geometric phase
- 1 July 2011
- Published by Elsevier in Ultramicroscopy
- Vol. 111 (8) , 1328-1337
Dark-field electron holography for the measurement of geometric phase
- 17 December 2010
- Published by Wiley in Physica Status Solidi (a)
- Vol. 208 (3) , 580-583
Strain mapping in layers and devices by electron holography
Strain can be measured at the micron scale by Raman spectroscopy and X‐ray diffraction, but at the nanoscale, the only viable tool is transmission electron microscopy (TEM). TEM techniques can be divided into two categories: diffraction based techniques such as convergent‐beam‐electron‐diffraction or nanobeam electron diffraction, and imaged based techniques such as high‐resolution electron microscopy or the new technique of dark‐field electron holography (HoloDark). The latter has recently been invented to measure strain to high precision (2 × 10−4), nanometer spatial resolution, and for micron fields of view. In this article, we present two latest and typical results from the HoloDark technique (which is applicable to all standard focused‐ion beam prepared crystalline samples): mapping of strain in contact etch stop layers induced strain structures, and in implanted layers, In such materials and structures, the Holodark technique, although still perfectible, has no competitor.
- 17 December 2010
- Published by Wiley in Physica Status Solidi (a)
- Vol. 208 (3) , 580-583
Strain mapping in layers and devices by electron holography
Strain can be measured at the micron scale by Raman spectroscopy and X‐ray diffraction, but at the nanoscale, the only viable tool is transmission electron microscopy (TEM). TEM techniques can be divided into two categories: diffraction based techniques such as convergent‐beam‐electron‐diffraction or nanobeam electron diffraction, and imaged based techniques such as high‐resolution electron microscopy or the new technique of dark‐field electron holography (HoloDark). The latter has recently been invented to measure strain to high precision (2 × 10−4), nanometer spatial resolution, and for micron fields of view. In this article, we present two latest and typical results from the HoloDark technique (which is applicable to all standard focused‐ion beam prepared crystalline samples): mapping of strain in contact etch stop layers induced strain structures, and in implanted layers, In such materials and structures, the Holodark technique, although still perfectible, has no competitor.
- Top Cited Papers
- 1 June 2008
- Published by Springer Nature in Nature
- Vol. 453 (7198) , 1086-1089
Nanoscale holographic interferometry for strain measurements in electronic devices
Strained silicon is now an integral feature of the latest generation of transistors and electronic devices because of the associated enhancement in carrier mobility. Strain is also expected to have an important role in future devices based on nanowires and in optoelectronic components. Different strategies have been used to engineer strain in devices, leading to complex strain distributions in two and three dimensions. Developing methods of strain measurement at the nanoscale has therefore been an important objective in recent years but has proved elusive in practice: none of the existing techniques combines the necessary spatial resolution, precision and field of view. For example, Raman spectroscopy or X-ray diffraction techniques can map strain at the micrometre scale, whereas transmission electron microscopy allows strain measurement at the nanometre scale but only over small sample areas. Here we present a technique capable of bridging this gap and measuring strain to high precision, with nanometre spatial resolution and for micrometre fields of view. Our method combines the advantages of moiré techniques with the flexibility of off-axis electron holography and is also applicable to relatively thick samples, thus reducing the influence of thin-film relaxation effects.
- 1 June 2008
- Published by Springer Nature in Nature
- Vol. 453 (7198) , 1086-1089
Top Cited PapersNanoscale holographic interferometry for strain measurements in electronic devices
Strained silicon is now an integral feature of the latest generation of transistors and electronic devices because of the associated enhancement in carrier mobility. Strain is also expected to have an important role in future devices based on nanowires and in optoelectronic components. Different strategies have been used to engineer strain in devices, leading to complex strain distributions in two and three dimensions. Developing methods of strain measurement at the nanoscale has therefore been an important objective in recent years but has proved elusive in practice: none of the existing techniques combines the necessary spatial resolution, precision and field of view. For example, Raman spectroscopy or X-ray diffraction techniques can map strain at the micrometre scale, whereas transmission electron microscopy allows strain measurement at the nanometre scale but only over small sample areas. Here we present a technique capable of bridging this gap and measuring strain to high precision, with nanometre spatial resolution and for micrometre fields of view. Our method combines the advantages of moiré techniques with the flexibility of off-axis electron holography and is also applicable to relatively thick samples, thus reducing the influence of thin-film relaxation effects.
- 17 April 2008
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 100 (15) , 156602
Direct Mapping of Strain in a Strained Silicon Transistor by High-Resolution Electron Microscopy
Aberration-corrected high-resolution transmission electron microscopy (HRTEM) is used to measure strain in a strained-silicon metal-oxide-semiconductor field-effect transistor. Strain components parallel and perpendicular to the gate are determined directly from the HRTEM image by geometric phase analysis. source and drain stressors lead to uniaxial compressive strain in the Si channel, reaching a maximum value of just below the gate oxide, equivalent to 2.2 GPa. Strain maps obtained by linear elasticity theory, modeled with the finite-element method, agree with the experimental results to within 0.1%.- 17 April 2008
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 100 (15) , 156602
Direct Mapping of Strain in a Strained Silicon Transistor by High-Resolution Electron Microscopy
Aberration-corrected high-resolution transmission electron microscopy (HRTEM) is used to measure strain in a strained-silicon metal-oxide-semiconductor field-effect transistor. Strain components parallel and perpendicular to the gate are determined directly from the HRTEM image by geometric phase analysis. source and drain stressors lead to uniaxial compressive strain in the Si channel, reaching a maximum value of just below the gate oxide, equivalent to 2.2 GPa. Strain maps obtained by linear elasticity theory, modeled with the finite-element method, agree with the experimental results to within 0.1%.- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1026
Strain measurements in s-Si/SiGe nanostructures by quantitative high-resolution electron microscopy
We have studied strained Si layers grown on Si1-xGex virtual substrate (VS) by high-resolution transmission electron microscopy (HRTEM). Aberration-corrected HRTEM coupled with geometric phase analysis (GPA) provides precise measurements of strain. Different parameters are investigated: the VS composition (x=20, 30, 40 and 50%) and the s-Si layer thickness. Finite element method simulations confirm our measurements. Measurements and simulations lead to the conclusion that the strain state of the deposited layer is independent of the layer thickness. We apply the technique to measuring strains in the channel region of a p-MOSFET and show that the technique is a promising metrological tool for nanoelectronic devices.
- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1026
Strain measurements in s-Si/SiGe nanostructures by quantitative high-resolution electron microscopy
We have studied strained Si layers grown on Si1-xGex virtual substrate (VS) by high-resolution transmission electron microscopy (HRTEM). Aberration-corrected HRTEM coupled with geometric phase analysis (GPA) provides precise measurements of strain. Different parameters are investigated: the VS composition (x=20, 30, 40 and 50%) and the s-Si layer thickness. Finite element method simulations confirm our measurements. Measurements and simulations lead to the conclusion that the strain state of the deposited layer is independent of the layer thickness. We apply the technique to measuring strains in the channel region of a p-MOSFET and show that the technique is a promising metrological tool for nanoelectronic devices.
- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1026
Determination of strain within Si1-yCy layers grown by CVD on a Si Substrate
- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1026
Determination of strain within Si1-yCy layers grown by CVD on a Si Substrate
- 1 December 2006
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 253 (1-2) , 145-148
Quantitative local strain measurements in compressive strained Ge/tensile strained Si bi-layers grown on top of relaxed Si0.5Ge0.5 virtual substrates
- 1 December 2006
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 253 (1-2) , 145-148
Quantitative local strain measurements in compressive strained Ge/tensile strained Si bi-layers grown on top of relaxed Si0.5Ge0.5 virtual substrates
- 11 October 2006
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 86 (29-31) , 4641-4656
Stress and strain around grain-boundary dislocations measured by high-resolution electron microscopy
Stresses and strains around a dislocation at a grain boundary in germanium are measured by a combination of high-resolution electron microscopy and geometric phase analysis. The method is established by first measuring the strains around a matrix dislocation in silicon. Stresses are determined using linear elastic theory and bulk elastic constants. Strain measurements are shown to agree with theoretical calculations based on linear anisotropic elastic theory to 0.2% at a spatial resolution of 2–3 nm. A dislocation constricted at a coherent twin boundary in germanium is subsequently analyzed. The method is adapted to cope with the problem that the reference lattice is not identical for the whole field of view, due to the grain boundary. Strains are compared with theoretical calculations of a matrix dislocation in germanium. Whereas strains in the grains on either side of the twin boundary agree closely with the isolated dislocation case, significant additional strains are localized at the boundary plane. By comparing the stresses and strains across the boundary plane, values for the elastic modulus of the twin boundary are proposed. The significant reduction in elastic modulus for the boundary, when compared to bulk elastic constants, is interpreted in terms of the non-equilibrium configuration of the boundary. An extension of the method is proposed to measure more generally the elastic properties of grain boundaries and interfaces.
- 11 October 2006
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 86 (29-31) , 4641-4656
Stress and strain around grain-boundary dislocations measured by high-resolution electron microscopy
Stresses and strains around a dislocation at a grain boundary in germanium are measured by a combination of high-resolution electron microscopy and geometric phase analysis. The method is established by first measuring the strains around a matrix dislocation in silicon. Stresses are determined using linear elastic theory and bulk elastic constants. Strain measurements are shown to agree with theoretical calculations based on linear anisotropic elastic theory to 0.2% at a spatial resolution of 2–3 nm. A dislocation constricted at a coherent twin boundary in germanium is subsequently analyzed. The method is adapted to cope with the problem that the reference lattice is not identical for the whole field of view, due to the grain boundary. Strains are compared with theoretical calculations of a matrix dislocation in germanium. Whereas strains in the grains on either side of the twin boundary agree closely with the isolated dislocation case, significant additional strains are localized at the boundary plane. By comparing the stresses and strains across the boundary plane, values for the elastic modulus of the twin boundary are proposed. The significant reduction in elastic modulus for the boundary, when compared to bulk elastic constants, is interpreted in terms of the non-equilibrium configuration of the boundary. An extension of the method is proposed to measure more generally the elastic properties of grain boundaries and interfaces.