Feng Luan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Feng Luan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Ping Shum
State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Department of EEE, Southern University of Science and Technology, Shenzhen, China
7 shared publications Tsung-Yang Liow
Institute of Microelectronics, A*STAR, 11 Science Park Road, Science Park II, Singapore 117685
5 shared publicationsZhe Xiao
OPTIMUS, School of Electrical and Electronics Engineering, Nanyang Technological University, Singapore 639798
5 shared publicationsJing Zhang
National Metrology Centre, A*STAR, 1 Science Park Drive, Singapore 118221
4 shared publicationsWenliang Qi
OPTIMUS, School of Electrical and Electronics Engineering, Nanyang Technological University, Singapore
4 shared publicationsYanyan Zhou
School of Electrical and Electronics Engineering, Nanyang Technological University, Singapore
4 shared publications
Latest Publications
- 20 April 2015
- Published by Optica Publishing Group in Optics Letters
- Vol. 40 (9) , 1908-1911
Power transfer mechanism of metallic grating coupled whispering gallery microsphere resonator
The power transfer mechanism of the Fano resonance in a metallic grating coupled whispering gallery microsphere resonator is both theoretically investigated and experimentally verified. Based on temporal coupled mode theory, a two-stage cascaded scattering model is formulated to account for the power interaction of multiple resonances in the system. The modeled results show agreement with experimental measurements and are able to explain several counter-intuitive observations in the spectra. The coupling efficiency of the grating coupler is evaluated at critical coupling by approximating symmetric resonance line-shape with grating design. Based on the modeled results, it is found that the coupling efficiency can be further improved by enhancing diffraction efficiency of the first-order diffractions.
- 20 April 2015
- Published by Optica Publishing Group in Optics Letters
- Vol. 40 (9) , 1908-1911
Power transfer mechanism of metallic grating coupled whispering gallery microsphere resonator
The power transfer mechanism of the Fano resonance in a metallic grating coupled whispering gallery microsphere resonator is both theoretically investigated and experimentally verified. Based on temporal coupled mode theory, a two-stage cascaded scattering model is formulated to account for the power interaction of multiple resonances in the system. The modeled results show agreement with experimental measurements and are able to explain several counter-intuitive observations in the spectra. The coupling efficiency of the grating coupler is evaluated at critical coupling by approximating symmetric resonance line-shape with grating design. Based on the modeled results, it is found that the coupling efficiency can be further improved by enhancing diffraction efficiency of the first-order diffractions.
- 8 May 2014
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (10) , 11834-11839
Reflective liquid level sensor based on modes conversion in thin-core fiber incorporating tilted fiber Bragg grating
A simple and compact reflective liquid level sensor based on modes conversion in the thin-core fiber incorporating one tilted fiber Bragg grating (TFBG) is proposed and experimentally demonstrated. A piece of thin-core fiber containing one TFBG ensures the modes conversion between the core mode and cladding modes. The external liquid can induce the cladding modes covert to the radiation modes and lead to the decrement of the collected cladding modes power, then the liquid level can be measured from the collected cladding modes power. The modes conversion in the proposed structure is theoretically analyzed. The experimental results show the high liquid level sensitivity and temperature immunity of the proposed sensor, and its significant advantage is that the measurement range is not limited to the length of the TFBG itself.
- 8 May 2014
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (10) , 11834-11839
Reflective liquid level sensor based on modes conversion in thin-core fiber incorporating tilted fiber Bragg grating
A simple and compact reflective liquid level sensor based on modes conversion in the thin-core fiber incorporating one tilted fiber Bragg grating (TFBG) is proposed and experimentally demonstrated. A piece of thin-core fiber containing one TFBG ensures the modes conversion between the core mode and cladding modes. The external liquid can induce the cladding modes covert to the radiation modes and lead to the decrement of the collected cladding modes power, then the liquid level can be measured from the collected cladding modes power. The modes conversion in the proposed structure is theoretically analyzed. The experimental results show the high liquid level sensitivity and temperature immunity of the proposed sensor, and its significant advantage is that the measurement range is not limited to the length of the TFBG itself.
- 16 December 2013
- Published by Optica Publishing Group in Optics Letters
- Vol. 39 (1) , 22-25
Simple and compact reflective refractometer based on tilted fiber Bragg grating inscribed in thin-core fiber
A simple and compact reflective refractometer based on a tilted fiber Bragg grating (TFBG) inscribed in an ultra-high photon-sensitive thin-core fiber is proposed and experimentally demonstrated. The reflective refractometer utilizes a short piece of thin-core fiber containing one TFBG to ensure the recoupling of cladding modes. The reflection spectra occur in two well-defined wavelength bands that correspond to the Bragg core mode and cladding modes, respectively. It is found that the power of the collected cladding modes changes with the external refractive index (RI), while that of the Bragg core mode remains unaffected and can be used as the temperature reference. High RI sensitivity and temperature immunity of the proposed reflective refractometer are experimentally achieved.
- 16 December 2013
- Published by Optica Publishing Group in Optics Letters
- Vol. 39 (1) , 22-25
Simple and compact reflective refractometer based on tilted fiber Bragg grating inscribed in thin-core fiber
A simple and compact reflective refractometer based on a tilted fiber Bragg grating (TFBG) inscribed in an ultra-high photon-sensitive thin-core fiber is proposed and experimentally demonstrated. The reflective refractometer utilizes a short piece of thin-core fiber containing one TFBG to ensure the recoupling of cladding modes. The reflection spectra occur in two well-defined wavelength bands that correspond to the Bragg core mode and cladding modes, respectively. It is found that the power of the collected cladding modes changes with the external refractive index (RI), while that of the Bragg core mode remains unaffected and can be used as the temperature reference. High RI sensitivity and temperature immunity of the proposed reflective refractometer are experimentally achieved.
- 4 September 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (18) , 21285-21292
Design and characterization of low loss 50 picoseconds delay line on SOI platform
We design and experimentally demonstrate 50 picoseconds (ps) low loss delay line on 300 nm SOI platform. The delay line unit consists of straight rib waveguide and strip bend section linked by a transition taper waveguide. Low propagation loss of ~0.1 dB/cm is achieved on the straight rib waveguide. With taking into account both low loss and desirable delay, a complete design and characterization process for passive delay line is presented. Our measurement results show that about 0.7 dB excess loss is achievable for 50 ps delay. The loss can be further reduced by adjusting the layout parameters.
- 4 September 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (18) , 21285-21292
Design and characterization of low loss 50 picoseconds delay line on SOI platform
We design and experimentally demonstrate 50 picoseconds (ps) low loss delay line on 300 nm SOI platform. The delay line unit consists of straight rib waveguide and strip bend section linked by a transition taper waveguide. Low propagation loss of ~0.1 dB/cm is achieved on the straight rib waveguide. With taking into account both low loss and desirable delay, a complete design and characterization process for passive delay line is presented. Our measurement results show that about 0.7 dB excess loss is achievable for 50 ps delay. The loss can be further reduced by adjusting the layout parameters.
- 2 July 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (14) , 16331-16336
Ultra-compact low loss polarization insensitive silicon waveguide splitter
We observe that the cascaded typical Y junctions will introduce unwanted periodic fringes over the spectrum in practical systems when they link with multimode waveguides. To solve the problem, we design and experimentally demonstrate a wavelength insensitive multimode interferometer (MMI) based 3-dB splitter which has all the merits of Y-splitters such as polarization insensitivity and ultra-compactness. The splitter has a footprint of 1.5 × 1.8 µm2, nearly one order smaller than the previously reported MMI splitters. The measured excess losses for TE and TM modes at telecom wavelength are as low as −0.11 dB and −0.18 dB respectively.
- 2 July 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (14) , 16331-16336
Ultra-compact low loss polarization insensitive silicon waveguide splitter
We observe that the cascaded typical Y junctions will introduce unwanted periodic fringes over the spectrum in practical systems when they link with multimode waveguides. To solve the problem, we design and experimentally demonstrate a wavelength insensitive multimode interferometer (MMI) based 3-dB splitter which has all the merits of Y-splitters such as polarization insensitivity and ultra-compactness. The splitter has a footprint of 1.5 × 1.8 µm2, nearly one order smaller than the previously reported MMI splitters. The measured excess losses for TE and TM modes at telecom wavelength are as low as −0.11 dB and −0.18 dB respectively.
- 4 April 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (7) , 8939-8944
Metallic diffraction grating enhanced coupling in whispering gallery resonator
For the first time, metallic diffraction grating is investigated to enable efficient coupling in the whispering gallery resonator (WGR). Six-fold field enhancement in the resonator is achieved with respect to their dielectric counter-parts. This higher coupling efficiency is attributed to the surface plasmon excitation which drives the whispering gallery mode along the grating. Fano resonances have been observed in optical reflection. With the metallic grating, single-port end-fire WGR configuration becomes possible - a scheme that has not been demonstrated in any other WGR coupling devices. Hence, it serves as a prototype for portable whispering gallery devices potentially useful in sensing, switching and nonlinear applications.
- 4 April 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (7) , 8939-8944
Metallic diffraction grating enhanced coupling in whispering gallery resonator
For the first time, metallic diffraction grating is investigated to enable efficient coupling in the whispering gallery resonator (WGR). Six-fold field enhancement in the resonator is achieved with respect to their dielectric counter-parts. This higher coupling efficiency is attributed to the surface plasmon excitation which drives the whispering gallery mode along the grating. Fano resonances have been observed in optical reflection. With the metallic grating, single-port end-fire WGR configuration becomes possible - a scheme that has not been demonstrated in any other WGR coupling devices. Hence, it serves as a prototype for portable whispering gallery devices potentially useful in sensing, switching and nonlinear applications.
- 1 March 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (5) , 5688-5700
Bandwidth analysis of waveguide grating coupler
The bandwidth of planar waveguide grating couplers is theoretically investigated based on the rigorous grating theory. We observe that the bandwidth behavior is not only determined by the grating coupler intrinsic properties, but also affected by the fiber parameters such as position, beam waist and Numerical Aperture. The rigorous bandwidth formula is derived. By analyzing the formula, several practical guidelines are proposed for grating coupler design and fiber operation in order to achieve wideband performance.
- 1 March 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (5) , 5688-5700
Bandwidth analysis of waveguide grating coupler
The bandwidth of planar waveguide grating couplers is theoretically investigated based on the rigorous grating theory. We observe that the bandwidth behavior is not only determined by the grating coupler intrinsic properties, but also affected by the fiber parameters such as position, beam waist and Numerical Aperture. The rigorous bandwidth formula is derived. By analyzing the formula, several practical guidelines are proposed for grating coupler design and fiber operation in order to achieve wideband performance.
- 1 January 2013
- Published by Optica Publishing Group
- p. AF4H.2
Fiber-optic chemical probe based on titled fiber Bragg grating inscribed in the thin-core fiber
A novel chemical probe based on the tilted fiber Bragg grating inscribed in the thin-core fiber has been proposed. High sensitivity and temperature immunity of our proposed sensor are experimentally demonstrated via cost-effective power detection.
- 1 January 2013
- Published by Optica Publishing Group
- p. AF4H.2
Fiber-optic chemical probe based on titled fiber Bragg grating inscribed in the thin-core fiber
A novel chemical probe based on the tilted fiber Bragg grating inscribed in the thin-core fiber has been proposed. High sensitivity and temperature immunity of our proposed sensor are experimentally demonstrated via cost-effective power detection.
- 31 August 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 24 (19) , 1722-1725
Mode Control in Planar Waveguide Grating Couplers With Double Surface Corrugation
Grating couplers with double surface corrugation are proposed to adjust the resonance behavior of both TE and TM modes simultaneously. Through proper selection of parameters, we designed a polarization-independent grating coupler operating at 1.55-μm telecommunication wavelength. Efficiency is achieved at around 55% for both TE and TM modes, and the polarization-dependent loss is <; 0.05 dB within the spectral window from 1544 to 1561 nm. Furthermore, a double-channel grating coupler is proposed to excite the TE and TM modes at 1.31 and 1.49 μm, respectively. The achievable efficiency is around 60% for both channels with good uniformity.
- 31 August 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 24 (19) , 1722-1725
Mode Control in Planar Waveguide Grating Couplers With Double Surface Corrugation
Grating couplers with double surface corrugation are proposed to adjust the resonance behavior of both TE and TM modes simultaneously. Through proper selection of parameters, we designed a polarization-independent grating coupler operating at 1.55-μm telecommunication wavelength. Efficiency is achieved at around 55% for both TE and TM modes, and the polarization-dependent loss is <; 0.05 dB within the spectral window from 1544 to 1561 nm. Furthermore, a double-channel grating coupler is proposed to excite the TE and TM modes at 1.31 and 1.49 μm, respectively. The achievable efficiency is around 60% for both channels with good uniformity.