Francois Andrieu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Francois Andrieu has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
D. Lafond
CEA-LETI, Grenoble, 17 Avenue des Martyrs, 38054 Grenoble Cedex 9, France
2 shared publications- Franck Fournel
Université Grenoble Alpes, CEA-LETI, 38054 Grenoble, France
2 shared publications O. Faynot
CEA-LETI, Grenoble, 17 Avenue des Martyrs, 38054 Grenoble Cedex 9, France
2 shared publications- Simon Deleonibus
CEA-LETI, 17 rue des Martyrs, 38054 Grenoble cedex 9, France
2 shared publications A. Asenov
1 shared publicationA. Brown
Gold Standard Simulations Ltd, Rankine Building, Glasgow, G12 8LT, UK
1 shared publication
Latest Publications
- Open Access
- 16 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 127 (1) , 15
Comparative Cradle-to-Gate Life Cycle Assessment of Planar and Vertical HZO-Based Ferroelectric Memories (FeRAM) on 22 nm FDSOI Node
Emerging non-volatile memories based on ferroelectric materials are currently under development to be integrated in the back-end-of-line of advanced complementary metal-oxide-semiconductor (CMOS) nodes. A life cycle assessment (LCA) over 16 impact categories has been carried out to compare planar (2D) and vertical (3D) integration strategies for the manufacturing of Hf0.5Zr0.5O2-based ferroelectric capacitors on a 22 nm CMOS technology node. The LCA demonstrates that the 3D approach allows us to reduce the environmental impacts by up to 20% over several impact categories. The device isolation by a single chemical–mechanical polishing (CMP) step instead of the standard photolithography and plasma etching processes proved to be the main source of reduction on the overall environmental footprint.
- 16 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 127 (1) , 15
Open AccessComparative Cradle-to-Gate Life Cycle Assessment of Planar and Vertical HZO-Based Ferroelectric Memories (FeRAM) on 22 nm FDSOI Node
Emerging non-volatile memories based on ferroelectric materials are currently under development to be integrated in the back-end-of-line of advanced complementary metal-oxide-semiconductor (CMOS) nodes. A life cycle assessment (LCA) over 16 impact categories has been carried out to compare planar (2D) and vertical (3D) integration strategies for the manufacturing of Hf0.5Zr0.5O2-based ferroelectric capacitors on a 22 nm CMOS technology node. The LCA demonstrates that the 3D approach allows us to reduce the environmental impacts by up to 20% over several impact categories. The device isolation by a single chemical–mechanical polishing (CMP) step instead of the standard photolithography and plasma etching processes proved to be the main source of reduction on the overall environmental footprint.
- 10 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (4) , 627-633
Total-Ionizing-Dose Effects on 3-D Sequentially Integrated FDSOI Ring Oscillators
Total-ionizing-dose responses are investigated for fully-depleted silicon-on-insulator (FDSOI) ring oscillators (RO), in three-dimensional (3D) architectures. Operational frequencies decrease after irradiation in these devices due primarily to threshold voltage shifts and transconductance degradation due to interface-trap buildup in the pull-up p MOSFETs. 3D sequentially-integrated FDSOI ROs fabricated in the bottom layer of the 3D structure show the most significant frequency degradation. AC-bias irradiation leads to greater shifts than static-bias irradiation in these devices due to enhanced interface-trap buildup. Circuit simulations reinforce the relative importance of transconductance degradation in pull-up p MOSFETs to the TID response of these ROs.
- 10 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (4) , 627-633
Total-Ionizing-Dose Effects on 3-D Sequentially Integrated FDSOI Ring Oscillators
Total-ionizing-dose responses are investigated for fully-depleted silicon-on-insulator (FDSOI) ring oscillators (RO), in three-dimensional (3D) architectures. Operational frequencies decrease after irradiation in these devices due primarily to threshold voltage shifts and transconductance degradation due to interface-trap buildup in the pull-up p MOSFETs. 3D sequentially-integrated FDSOI ROs fabricated in the bottom layer of the 3D structure show the most significant frequency degradation. AC-bias irradiation leads to greater shifts than static-bias irradiation in these devices due to enhanced interface-trap buildup. Circuit simulations reinforce the relative importance of transconductance degradation in pull-up p MOSFETs to the TID response of these ROs.
- 27 June 2014
- Published by Elsevier
Contributor contact details
- 9 December 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 8 (2) , 167-173
Evidences on the Physical Origin of the Unexpected Transport Degradation in Ultimate n-FDSOI Devices
Due to a new quasi-ballistic extraction methodology dedicated to low-longitudinal-field conditions, experimental carrier mean-free-paths have been determined on strained and unstrained fully depleted silicon-on-insulator (n-FDSOI) devices with Si film thickness ranging from 11.8 to 2.5 nm, gate length down to 30 nm, and a TiN/HfO2 gate stack. Electron mobility evolution with the Si film thickness, reported in a previous study, is explored and quantitatively explained. Moreover, through inversion charge and temperature deep investigations, dominant carrier transport mechanisms are analyzed. It is experimentally revealed that transport degradation occurs in short and thin channels, which is shown to be mainly due to additional Coulomb scatterings rather than ballistic artifact in both strained and unstrained devices.
- 9 December 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 8 (2) , 167-173
Evidences on the Physical Origin of the Unexpected Transport Degradation in Ultimate n-FDSOI Devices
Due to a new quasi-ballistic extraction methodology dedicated to low-longitudinal-field conditions, experimental carrier mean-free-paths have been determined on strained and unstrained fully depleted silicon-on-insulator (n-FDSOI) devices with Si film thickness ranging from 11.8 to 2.5 nm, gate length down to 30 nm, and a TiN/HfO2 gate stack. Electron mobility evolution with the Si film thickness, reported in a previous study, is explored and quantitatively explained. Moreover, through inversion charge and temperature deep investigations, dominant carrier transport mechanisms are analyzed. It is experimentally revealed that transport degradation occurs in short and thin channels, which is shown to be mainly due to additional Coulomb scatterings rather than ballistic artifact in both strained and unstrained devices.
- 1 April 2006
- Published by Elsevier in Solid-State Electronics
- Vol. 50 (4) , 566-572
Performance and physics of sub-50nm strained Si on Si1−xGex-on-insulator (SGOI) nMOSFETs
- 1 April 2006
- Published by Elsevier in Solid-State Electronics
- Vol. 50 (4) , 566-572
Performance and physics of sub-50nm strained Si on Si1−xGex-on-insulator (SGOI) nMOSFETs
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01631918,p. 1-4
Comparative Scalability of PVD and CVD TiN on HfO2 as a Metal Gate Stack for FDSOI cMOSFETs down to 25nm Gate Length and Width
This paper compares, for the first time, the scalability of physical- and chemical-vapor-deposited (PVD and CVD) TiN on HfO2 as a gate stack for FDSOI cMOSFETs down to 25nm gate length and width. It is shown that not only the intrinsic material properties but also the device architecture strongly influences the final gate stack properties. Reliability issues, stress and gate control in the sub-35nm scale are reported and explained, thanks to material, electric data and mechanical simulations. In spite of its lower performance on large device dimensions, PVD-TiN demonstrates a better overall trade-off, leading to a 17% ion improvement on 25nm short and narrow devices
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01631918,p. 1-4
Comparative Scalability of PVD and CVD TiN on HfO2 as a Metal Gate Stack for FDSOI cMOSFETs down to 25nm Gate Length and Width
This paper compares, for the first time, the scalability of physical- and chemical-vapor-deposited (PVD and CVD) TiN on HfO2 as a gate stack for FDSOI cMOSFETs down to 25nm gate length and width. It is shown that not only the intrinsic material properties but also the device architecture strongly influences the final gate stack properties. Reliability issues, stress and gate control in the sub-35nm scale are reported and explained, thanks to material, electric data and mechanical simulations. In spite of its lower performance on large device dimensions, PVD-TiN demonstrates a better overall trade-off, leading to a 17% ion improvement on 25nm short and narrow devices
- 19 September 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 26 (10) , 755-757
In-depth characterization of the hole mobility in 50-nm process-induced strained MOSFETs
This letter presents the first experimental study of the mobility in 50-nm gate length (L/sub G/) pMOSFETs highly strained by a contact etch stop layer. Thanks to an advanced characterization method, the mobility is in-depth studied versus the inversion charge density, the gate length and the temperature. The physical origin of the more than 50% mobility enhancement at L/sub G/=50 nm is proven to be the low effective mass of the top valence band rather than any scattering modification. This mobility gain is maintained even at high effective field. This explains the 30% I/sub ON/ enhancement at 50-nm gate length, which is among the best results at such a dimension.
- 19 September 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 26 (10) , 755-757
In-depth characterization of the hole mobility in 50-nm process-induced strained MOSFETs
This letter presents the first experimental study of the mobility in 50-nm gate length (L/sub G/) pMOSFETs highly strained by a contact etch stop layer. Thanks to an advanced characterization method, the mobility is in-depth studied versus the inversion charge density, the gate length and the temperature. The physical origin of the more than 50% mobility enhancement at L/sub G/=50 nm is proven to be the low effective mass of the top valence band rather than any scattering modification. This mobility gain is maintained even at high effective field. This explains the 30% I/sub ON/ enhancement at 50-nm gate length, which is among the best results at such a dimension.