Mingming Tong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mingming Tong has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- David J. Browne
University College Dublin
5 shared publications A Cocks
University of Oxford, UK
1 shared publicationA Kidess
Delft University of Technology, the Netherlands
1 shared publicationC Kleijn
Delft University of Technology, the Netherlands
1 shared publicationC Zhao
Delft University of Technology, the Netherlands
1 shared publication- Davide Ceresoli
Istituto di Scienze e Tecnologie Chimiche “Giulio Natta” (SCITEC) del Consiglio Nazionale delle Ricerche (CNR), via C. Golgi, 19, Milano, 20133, Italy
1 shared publication
Latest Publications
- Open Access
- 11 June 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 84 (1) , 012092
Computational prediction of the refinement of oxide agglomerates in a physical conditioning process for molten aluminium alloy
Physically conditioning molten scrap aluminium alloys using high shear processing (HSP) was recently found to be a promising technology for purification of contaminated alloys. HSP refines the solid oxide agglomerates in molten alloys, so that they can act as sites for the nucleation of Fe-rich intermetallic phases which can subsequently be removed by the downstream de-drossing process. In this paper, a computational modelling for predicting the evolution of size of oxide clusters during HSP is presented. We used CFD to predict the macroscopic flow features of the melt, and the resultant field predictions of temperature and melt shear rate were transferred to a population balance model (PBM) as its key inputs. The PBM is a macroscopic model that formulates the microscopic agglomeration and breakage of a population of a dispersed phase. Although it has been widely used to study conventional deoxidation of liquid metal, this is the first time that PBM has been used to simulate the melt conditioning process within a rotor/stator HSP device. We employed a method which discretizes the continuous profile of size of the dispersed phase into a collection of discrete bins of size, to solve the governing population balance equation for the size of agglomerates. A finite volume method was used to solve the continuity equation, the energy equation and the momentum equation. The overall computation was implemented mainly using the FLUENT module of ANSYS. The simulations showed that there is a relatively high melt shear rate between the stator and sweeping tips of the rotor blades. This high shear rate leads directly to significant fragmentation of the initially large oxide aggregates. Because the process of agglomeration is significantly slower than the breakage processes at the beginning of HSP, the mean size of oxide clusters decreases very rapidly. As the process of agglomeration gradually balances the process of breakage, the mean size of oxide clusters converges to a steady value. The model enables formulation of the quantitative relationship between the macroscopic flow features of liquid metal and the change of size of dispersed oxide clusters, during HSP. It predicted the variation in size of the dispersed phased with operational parameters (including the geometry and, particularly, the speed of the rotor), which is of direct use to experimentalists optimising the design of the HSP device and its implementation.
- 11 June 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 84 (1) , 012092
Open AccessComputational prediction of the refinement of oxide agglomerates in a physical conditioning process for molten aluminium alloy
Physically conditioning molten scrap aluminium alloys using high shear processing (HSP) was recently found to be a promising technology for purification of contaminated alloys. HSP refines the solid oxide agglomerates in molten alloys, so that they can act as sites for the nucleation of Fe-rich intermetallic phases which can subsequently be removed by the downstream de-drossing process. In this paper, a computational modelling for predicting the evolution of size of oxide clusters during HSP is presented. We used CFD to predict the macroscopic flow features of the melt, and the resultant field predictions of temperature and melt shear rate were transferred to a population balance model (PBM) as its key inputs. The PBM is a macroscopic model that formulates the microscopic agglomeration and breakage of a population of a dispersed phase. Although it has been widely used to study conventional deoxidation of liquid metal, this is the first time that PBM has been used to simulate the melt conditioning process within a rotor/stator HSP device. We employed a method which discretizes the continuous profile of size of the dispersed phase into a collection of discrete bins of size, to solve the governing population balance equation for the size of agglomerates. A finite volume method was used to solve the continuity equation, the energy equation and the momentum equation. The overall computation was implemented mainly using the FLUENT module of ANSYS. The simulations showed that there is a relatively high melt shear rate between the stator and sweeping tips of the rotor blades. This high shear rate leads directly to significant fragmentation of the initially large oxide aggregates. Because the process of agglomeration is significantly slower than the breakage processes at the beginning of HSP, the mean size of oxide clusters decreases very rapidly. As the process of agglomeration gradually balances the process of breakage, the mean size of oxide clusters converges to a steady value. The model enables formulation of the quantitative relationship between the macroscopic flow features of liquid metal and the change of size of dispersed oxide clusters, during HSP. It predicted the variation in size of the dispersed phased with operational parameters (including the geometry and, particularly, the speed of the rotor), which is of direct use to experimentalists optimising the design of the HSP device and its implementation.
- 1 June 2014
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 73, 284-292
An incompressible multi-phase smoothed particle hydrodynamics (SPH) method for modelling thermocapillary flow
- 1 June 2014
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 73, 284-292
An incompressible multi-phase smoothed particle hydrodynamics (SPH) method for modelling thermocapillary flow
- Open Access
- 3 July 2012
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 33 (1) , 012029
An integrated framework for multi-scale multi-physics numerical modelling of interface evolution in welding
- 3 July 2012
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 33 (1) , 012029
Open AccessAn integrated framework for multi-scale multi-physics numerical modelling of interface evolution in welding
- 12 January 2012
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 27 (1) , 012080
Smoothed particle hydrodynamics modelling of the fluid flow and heat transfer in the weld pool during laser spot welding
Smoothed particle hydrodynamics is employed, for the first time, to develop a numerical model for the melting and fluid flow during laser welding process. In this meshlessLagrangian method the gas-melt two phase flow, heat transfer, surface tension, and melting of solid parent material are considered. This model was used to study the evolution of temperature field and fluid flow in the case study of laser spot welding in 2D. The simulation results show a strong influence of the melting process on the flow of liquid metal and a clear influence of the Marangoni flow on the heat transfer is also found.
- 12 January 2012
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 27 (1) , 012080
Smoothed particle hydrodynamics modelling of the fluid flow and heat transfer in the weld pool during laser spot welding
Smoothed particle hydrodynamics is employed, for the first time, to develop a numerical model for the melting and fluid flow during laser welding process. In this meshlessLagrangian method the gas-melt two phase flow, heat transfer, surface tension, and melting of solid parent material are considered. This model was used to study the evolution of temperature field and fluid flow in the case study of laser spot welding in 2D. The simulation results show a strong influence of the melting process on the flow of liquid metal and a clear influence of the Marangoni flow on the heat transfer is also found.
- 29 June 2007
- Published by Wiley in Communications in Numerical Methods in Engineering
- Vol. 24 (11) , 1171-1181
Verification of a front‐tracking model of two‐fluid interface Kelvin–Helmholtz instability by study of travelling waves
- 29 June 2007
- Published by Wiley in Communications in Numerical Methods in Engineering
- Vol. 24 (11) , 1171-1181
Verification of a front‐tracking model of two‐fluid interface Kelvin–Helmholtz instability by study of travelling waves