Yoshimasa Amano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yoshimasa Amano has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Motoi Machida
Graduate School of Engineering, Chiba University
29 shared publications Masami Aikawa
Faculty of Science, Kisarazu National College of Technology, Japan
4 shared publications- Kai Wei
Chiba University
2 shared publications Kazuo Taki
2 shared publicationsMasaru Iwanaga
Graduate School of Engineering, Chiba University, Japan
2 shared publicationsMotoi Machida
Graduate School of Engineering, Department of Applied Chemistry and Biotechnology, Chiba University, Chiba, Japan
2 shared publications
Latest Publications
- Open Access
- 5 February 2026
- Published by IWA Publishing in Water Science & Technology
- Vol. 93 (5) , 743-753
Enhancing the floating velocity of harmful cyanobacteria by controlling temperature and the extracellular polysaccharides content
Artificial acceleration of Microcystis buoyancy was attempted by manipulating temperature (15-35 °C) to reduce intracellular polysaccharides and increase gas vesicles, as well as varying the amount of Ca2+ (500 and 1,000 mg/L) and tightly bound extracellular polysaccharides (TB-EPS) (200 mg/L) to expand the colony size in preculture. In preculture, changes in temperature affected the floating velocity of Microcystis, and the floating velocity was 4.9 and 6.4 times higher at 35 °C than that at 15 and 25 °C in dark conditions, respectively. Since the content of intracellular polysaccharides at each temperature condition was not largely different (range: 9.9-11.1 pg/cell, p > 0.05), gas vesicle volume would be concerned with the buoyancy, whereas in dark conditions at 35 °C, the addition of Ca2+ (1,000 mg/L) and TB-EPS (200 mg/L) into the medium containing Microcystis enlarged colony size from 280 μm as the mean for the control to 390 μm, which resulted in 1.9 times faster floating velocity. It was expected that Ca2+ could promote colony size expansion of Microcystis by forming cross-linking structures with the negatively charged functional groups originally present, and externally added TB-EPS. These findings provide new insights into strategies for more efficient removal of Microcystis in lakes.
- 5 February 2026
- Published by IWA Publishing in Water Science & Technology
- Vol. 93 (5) , 743-753
Open AccessEnhancing the floating velocity of harmful cyanobacteria by controlling temperature and the extracellular polysaccharides content
Artificial acceleration of Microcystis buoyancy was attempted by manipulating temperature (15-35 °C) to reduce intracellular polysaccharides and increase gas vesicles, as well as varying the amount of Ca2+ (500 and 1,000 mg/L) and tightly bound extracellular polysaccharides (TB-EPS) (200 mg/L) to expand the colony size in preculture. In preculture, changes in temperature affected the floating velocity of Microcystis, and the floating velocity was 4.9 and 6.4 times higher at 35 °C than that at 15 and 25 °C in dark conditions, respectively. Since the content of intracellular polysaccharides at each temperature condition was not largely different (range: 9.9-11.1 pg/cell, p > 0.05), gas vesicle volume would be concerned with the buoyancy, whereas in dark conditions at 35 °C, the addition of Ca2+ (1,000 mg/L) and TB-EPS (200 mg/L) into the medium containing Microcystis enlarged colony size from 280 μm as the mean for the control to 390 μm, which resulted in 1.9 times faster floating velocity. It was expected that Ca2+ could promote colony size expansion of Microcystis by forming cross-linking structures with the negatively charged functional groups originally present, and externally added TB-EPS. These findings provide new insights into strategies for more efficient removal of Microcystis in lakes.
- Open Access
- 1 January 2024
- Published by Japan Society for Environmental Chemistry in Journal of Environmental Chemistry
- Vol. 34, 71-78
Characteristics of Nitrate Ion Adsorption onto N-doped Activated Carbon Derived from Pinecone and Urea
Currently, ion exchange resins are widely used to remove nitrate ions from water, but they have problems such as high production cost and difficulty to reuse, so there is a demand for the development of alternative adsorbents. In this study, we attempted to introduce the quaternary nitrogen (N-Q) to the activated carbon using the biomass material to enhance the nitrate ion adsorption in aqueous solution. Then, the relationships between nitrate ion adsorption and equilibrium solution pH (pHe), the elemental ratio, and the surface functional group contents of the sample were investigated to examine the amount of the N-Q and its effect on nitrate ion adsorption. As a result, the amount of N-Q in the sample increased with raising the ratio of urea to pinecone, and the optimal weight ratio that can introduce a large amount of N-Q into the sample and improve nitrate ion adsorption performance was Pc:Ur:Zn=1:1.5:0.5. The sample prepared with the optimum weight ratio showed high nitrate ion adsorption (0.5 mmol/g) as a carbon material and maintained the high adsorption performance in a wide pH range. These results indicated that the relatively easy preparation method in this experiment efficiently could introduce the N-Q into biomass AC, which promoted nitrate ion adsorption in aqueous solution. Also, it would imply that the influence of N-Q amount on nitrate ion adsorption performance was greater than the specific surface area, which is general indicator of activated carbon adsorption capacity.
- 1 January 2024
- Published by Japan Society for Environmental Chemistry in Journal of Environmental Chemistry
- Vol. 34, 71-78
Open AccessCharacteristics of Nitrate Ion Adsorption onto N-doped Activated Carbon Derived from Pinecone and Urea
Currently, ion exchange resins are widely used to remove nitrate ions from water, but they have problems such as high production cost and difficulty to reuse, so there is a demand for the development of alternative adsorbents. In this study, we attempted to introduce the quaternary nitrogen (N-Q) to the activated carbon using the biomass material to enhance the nitrate ion adsorption in aqueous solution. Then, the relationships between nitrate ion adsorption and equilibrium solution pH (pHe), the elemental ratio, and the surface functional group contents of the sample were investigated to examine the amount of the N-Q and its effect on nitrate ion adsorption. As a result, the amount of N-Q in the sample increased with raising the ratio of urea to pinecone, and the optimal weight ratio that can introduce a large amount of N-Q into the sample and improve nitrate ion adsorption performance was Pc:Ur:Zn=1:1.5:0.5. The sample prepared with the optimum weight ratio showed high nitrate ion adsorption (0.5 mmol/g) as a carbon material and maintained the high adsorption performance in a wide pH range. These results indicated that the relatively easy preparation method in this experiment efficiently could introduce the N-Q into biomass AC, which promoted nitrate ion adsorption in aqueous solution. Also, it would imply that the influence of N-Q amount on nitrate ion adsorption performance was greater than the specific surface area, which is general indicator of activated carbon adsorption capacity.
- 18 February 2022
- Published by Springer Nature in Hydrobiologia
- Vol. 849 (7) , 1677-1688
Temperature-dependent growth characteristics and dominance trends of the cyanobacterium Microcystis sp. and the diatom Cyclotella meneghiniana
- 18 February 2022
- Published by Springer Nature in Hydrobiologia
- Vol. 849 (7) , 1677-1688
Temperature-dependent growth characteristics and dominance trends of the cyanobacterium Microcystis sp. and the diatom Cyclotella meneghiniana
- 1 July 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 289, 112484
Effect of two types of adsorption sites of activated carbon fibers on nitrate ion adsorption
- 1 July 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 289, 112484
Effect of two types of adsorption sites of activated carbon fibers on nitrate ion adsorption
- 6 March 2021
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 232 (3) , 1-11
The Effect of pH and Light on the Colony Formation and Buoyancy of Microcystis aeruginosa UTEX-2061
- 6 March 2021
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 232 (3) , 1-11
The Effect of pH and Light on the Colony Formation and Buoyancy of Microcystis aeruginosa UTEX-2061
- 1 January 2021
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 38 (1) , 15-23
A Competitive Growth Model for the Simulation of Cyanobacterial Blooms Under Eutrophic Conditions
This study presents a novel competitive growth model between Microcystis sp. (cyanobacteria) and Cyclotella meneghiniana (bacillariophyta) as a function of nitrogen and phosphorus concentrations, and dilution rate. The growth model was developed by combining the Droop and the Lotka–Volterra models to make it applicable to highly eutrophic conditions. Following the model development, cyanobacterial growth patterns in a monoxenic culture experiment were simulated, and the factors influencing the suppression of cyanobacterial blooms were discussed. Results from the monoxenic culture experiment simulation showed that a more accurate prediction of growth pattern was provided by the model developed in this study, when compared with our previous model. Specifically, the overestimation of cell densities under high nutrient conditions by the previous model was corrected. The simulation results also revealed that the initial nitrogen and phosphorus concentrations were decisive factors in determining which nutrient was critical to the cyanobacterial growth. It was also discovered that the crucial nutrient (nitrogen or phosphorus) for cyanobacterial growth switched at around an initial nitrogen and phosphorus mass ratio of 11. When the ratio was above 11, phosphorus was observed to be critical for cyanobacterial growth, while nitrogen was more critical when the ratio was below 11. These findings provide an ability to predict which nutrient is more important for cyanobacterial growth, and targeting its management or reduction in a water body can be promising toward the suppression of cyanobacterial blooms.
- 1 January 2021
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 38 (1) , 15-23
A Competitive Growth Model for the Simulation of Cyanobacterial Blooms Under Eutrophic Conditions
This study presents a novel competitive growth model between Microcystis sp. (cyanobacteria) and Cyclotella meneghiniana (bacillariophyta) as a function of nitrogen and phosphorus concentrations, and dilution rate. The growth model was developed by combining the Droop and the Lotka–Volterra models to make it applicable to highly eutrophic conditions. Following the model development, cyanobacterial growth patterns in a monoxenic culture experiment were simulated, and the factors influencing the suppression of cyanobacterial blooms were discussed. Results from the monoxenic culture experiment simulation showed that a more accurate prediction of growth pattern was provided by the model developed in this study, when compared with our previous model. Specifically, the overestimation of cell densities under high nutrient conditions by the previous model was corrected. The simulation results also revealed that the initial nitrogen and phosphorus concentrations were decisive factors in determining which nutrient was critical to the cyanobacterial growth. It was also discovered that the crucial nutrient (nitrogen or phosphorus) for cyanobacterial growth switched at around an initial nitrogen and phosphorus mass ratio of 11. When the ratio was above 11, phosphorus was observed to be critical for cyanobacterial growth, while nitrogen was more critical when the ratio was below 11. These findings provide an ability to predict which nutrient is more important for cyanobacterial growth, and targeting its management or reduction in a water body can be promising toward the suppression of cyanobacterial blooms.
- Open Access
- 6 June 2020
- Published by Springer Nature in SN Applied Sciences
- Vol. 2 (7) , 1-13
Investigating the effective carbon material for thermal chemical vapor deposition using aniline to enhance As(V) adsorption capacity of activated carbon
- 6 June 2020
- Published by Springer Nature in SN Applied Sciences
- Vol. 2 (7) , 1-13
Open AccessInvestigating the effective carbon material for thermal chemical vapor deposition using aniline to enhance As(V) adsorption capacity of activated carbon