Ilse Steffan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ilse Steffan has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Michaela Zeiner
Man-Technology-Environment Research Centre, School of Science and Technology, Örebro University, Fakultetsgatan 1, 70182 Örebro, Sweden
4 shared publications - Iva Rezić
Faculty of Textile Technology, University of Zagreb, Zagreb, Croatia
2 shared publications Darko Ujević
1 shared publicationGyula Zaray
Institute of Chemical Technology and Environmental Chemistry, Loránd Eötvös University Budapest, Pázmány Péter sétány 1/a, H-1117 Budapest, Hungary
1 shared publicationI. Juranović Ćindrić
University of Zagreb Laboratory of Analytical Chemistry, Faculty of Science Zabreb Croatia
1 shared publicationKarl Dobianer
Technical Office for Chemistry—Dr. Karl Dobianer, Vienna, Austria
1 shared publication
Latest Publications
- 1 March 2011
- Vol. 35 (1) , 89-92
Determination of total chromium in tanned leather samples used in car industry.
Despite the high competition of synthetic fibers leather is nowadays still widely used for many applications. In order to ensure a sufficient stability of the skin matrix against many factors, such as microbial degradation, heat and sweat, a tanning process is indispensable. Using chromium (III) for this purpose offers a multitude of advantages, thus this way of tanning is widely applied. During the use of chromium tanned leather as clothing material as well as for decoration/covering purposes, chromium is extracted from the leather and may then cause nocuous effects to human skin, e.g. allergic reactions. Thus the knowledge of the total chromium content of leather samples expected to come into prolonged touch with human skin is very important. In car industry leather is used as cover for seats, steering wheel and gearshift lever The chromium contents often chromium tanned leather samples used in car industry were determined. First all samples were dried at 65 degrees C overnight and then cut in small pieces using a ceramic knife, weighed and analyzed by inductively coupled plasma--optical emission spectrometry (ICP-OES) after acidic microwave assisted digestion. The total chromium amounts found were in the range from 19 mg/g up to 32 mg/g. The extraction yield of chromium from leather samples in sweat is approximately 2-7%. Thus especially during long journeys in summer chromium can be extracted in amounts which may cause nocuous effects for example on the palm of the hands or on the back.
- 1 March 2011
- Vol. 35 (1) , 89-92
Determination of total chromium in tanned leather samples used in car industry.
Despite the high competition of synthetic fibers leather is nowadays still widely used for many applications. In order to ensure a sufficient stability of the skin matrix against many factors, such as microbial degradation, heat and sweat, a tanning process is indispensable. Using chromium (III) for this purpose offers a multitude of advantages, thus this way of tanning is widely applied. During the use of chromium tanned leather as clothing material as well as for decoration/covering purposes, chromium is extracted from the leather and may then cause nocuous effects to human skin, e.g. allergic reactions. Thus the knowledge of the total chromium content of leather samples expected to come into prolonged touch with human skin is very important. In car industry leather is used as cover for seats, steering wheel and gearshift lever The chromium contents often chromium tanned leather samples used in car industry were determined. First all samples were dried at 65 degrees C overnight and then cut in small pieces using a ceramic knife, weighed and analyzed by inductively coupled plasma--optical emission spectrometry (ICP-OES) after acidic microwave assisted digestion. The total chromium amounts found were in the range from 19 mg/g up to 32 mg/g. The extraction yield of chromium from leather samples in sweat is approximately 2-7%. Thus especially during long journeys in summer chromium can be extracted in amounts which may cause nocuous effects for example on the palm of the hands or on the back.
- 1 March 2008
- Published by Akademiai Kiado Zrt. in Acta Agronomica Hungarica
- Vol. 56 (1) , 33-40
Comparison of methods for inorganic trace element analysis in croatian olive oils
The aim of the present study was a comparison of the analytical methods optimized for the determination of trace elements in olive oils as a basis for further investigations, such as adulteration detection or geographical characterization.Different types of sample preparation procedures prior to ICP-AES and GFAAS determinations were investigated: both open and closed vessel digestion in a steel bomb, as well as microwave-assisted digestion using a closed system, which was selected for further investigations. Recoveries for all elements in olive oil were > 95%. Good reproducibility (up to 10% RSD) was achieved for the measurements of the elements analysed. The sensitivity of the ICP-AES technique was sufficient for the determination of Ca, Fe, Mg and Zn (relative standard deviation approx. 2%). Furthermore, the proposed digestion method allowed the GFAAS determination of Al, Co, Cu, K and Ni in the concentration range of 0.1 to 1.5 μg/g, with relative standard deviations of approximately 3 to 10% for all samples.
- 1 March 2008
- Published by Akademiai Kiado Zrt. in Acta Agronomica Hungarica
- Vol. 56 (1) , 33-40
Comparison of methods for inorganic trace element analysis in croatian olive oils
The aim of the present study was a comparison of the analytical methods optimized for the determination of trace elements in olive oils as a basis for further investigations, such as adulteration detection or geographical characterization.Different types of sample preparation procedures prior to ICP-AES and GFAAS determinations were investigated: both open and closed vessel digestion in a steel bomb, as well as microwave-assisted digestion using a closed system, which was selected for further investigations. Recoveries for all elements in olive oil were > 95%. Good reproducibility (up to 10% RSD) was achieved for the measurements of the elements analysed. The sensitivity of the ICP-AES technique was sufficient for the determination of Ca, Fe, Mg and Zn (relative standard deviation approx. 2%). Furthermore, the proposed digestion method allowed the GFAAS determination of Al, Co, Cu, K and Ni in the concentration range of 0.1 to 1.5 μg/g, with relative standard deviations of approximately 3 to 10% for all samples.
- 7 October 2007
- Published by Elsevier in Toxicology Letters
- Vol. 172, S240
Mathematical model for the calculation of potential health risk by heavy metals present in and on textiles
- 7 October 2007
- Published by Elsevier in Toxicology Letters
- Vol. 172, S240
Mathematical model for the calculation of potential health risk by heavy metals present in and on textiles
- 4 December 2006
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 20 (4) , 240-244
Selected urinary metal reference concentrations of the Viennese population – urinary metal reference values (Vienna)
- 4 December 2006
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 20 (4) , 240-244
Selected urinary metal reference concentrations of the Viennese population – urinary metal reference values (Vienna)