Jean-Claude Gelin
Research Subjects
Jean-Claude Gelin has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Thierry Barrière
Marie and Louis Pasteur University
6 shared publications - Alexandre Royer
Department of Applied Mechanics, FEMTO-ST Institute, 26 Rue de l’Epitaphe, 25000 Besançon, France
2 shared publications - Arnaud Lejeune
Applied Mechanics Department, FEMTO-ST Institute, University Bourgogne Franche-Comté, CNRS (UMR 6174), 24 Rue de L'Épitaphe, Besançon 25000, France
2 shared publications C. Quinard
ENSMM
2 shared publicationsT. Barrière
FEMTO-ST Institute
2 shared publications- Zhiqiang Cheng
School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu, 610031, China
2 shared publications
Latest Publications
- Open Access
Development and Characterization of a Metal Injection Molding Bio Sourced Inconel 718 Feedstock Based on Polyhydroxyalkanoates
The binder plays the most important role in the metal injection molding (MIM) process. It provides fluidity of the feedstock mixture and adhesion of the powder to keep the molded shape during injection molding. The binder must provide strength and cohesion for the molded part and must be easy to remove from the molded part. Moreover, it must be recyclable, environmentally friendly and economical. Also, the miscibility between polymers affects the homogeneity of the injected parts. The goal of this study is to develop a feedstock of superalloy Inconel 718 that is environmentally friendly. For these different binders, formulations based on polyethylene glycol (PEG), because of his water solubility property, and bio sourced polymers were studied. Polyhydroxyalkanoates (PHA) were investigated as a bio sourced polymer due to its miscibility with the PEG. The result is compared to a standard formulation using polypropylene (PP). The chemical and rheological behavior of the binder formulation during mixing, injection and debinding process were investigated. The feedstock was characterized in the same way as the binders and the interactions between the powder and the binders were also studied. The results show the well adapted formulation of polymer binder to produce a superalloy Inconel 718 feedstock.
Open AccessDevelopment and Characterization of a Metal Injection Molding Bio Sourced Inconel 718 Feedstock Based on Polyhydroxyalkanoates
The binder plays the most important role in the metal injection molding (MIM) process. It provides fluidity of the feedstock mixture and adhesion of the powder to keep the molded shape during injection molding. The binder must provide strength and cohesion for the molded part and must be easy to remove from the molded part. Moreover, it must be recyclable, environmentally friendly and economical. Also, the miscibility between polymers affects the homogeneity of the injected parts. The goal of this study is to develop a feedstock of superalloy Inconel 718 that is environmentally friendly. For these different binders, formulations based on polyethylene glycol (PEG), because of his water solubility property, and bio sourced polymers were studied. Polyhydroxyalkanoates (PHA) were investigated as a bio sourced polymer due to its miscibility with the PEG. The result is compared to a standard formulation using polypropylene (PP). The chemical and rheological behavior of the binder formulation during mixing, injection and debinding process were investigated. The feedstock was characterized in the same way as the binders and the interactions between the powder and the binders were also studied. The results show the well adapted formulation of polymer binder to produce a superalloy Inconel 718 feedstock.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1769 (1) , 020009
Development of bio-sourced binder to metal injection moulding
In the MIM process the binder play the most important role. It provides fluidity of the feedstock mixture for injection molding and adhesion of the powder to keep the molded shape. The binder must provide strength and cohesion for the molded part, must be easy to be removed from the molded part, and must be the recyclable, environmentally friendly and economical ones. The goal of this study is to develop a binder environmentally friendly. For this, a study of formulation based on polyethylene glycol, because of is water debinding properties, was made. Polylactic acid and Polyhydroxyalkanoates were investigated as bio sourced polymers. The chemical, miscibility and rheological behavior of the binder formulation were investigated.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1769 (1) , 020009
Development of bio-sourced binder to metal injection moulding
In the MIM process the binder play the most important role. It provides fluidity of the feedstock mixture for injection molding and adhesion of the powder to keep the molded shape. The binder must provide strength and cohesion for the molded part, must be easy to be removed from the molded part, and must be the recyclable, environmentally friendly and economical ones. The goal of this study is to develop a binder environmentally friendly. For this, a study of formulation based on polyethylene glycol, because of is water debinding properties, was made. Polylactic acid and Polyhydroxyalkanoates were investigated as bio sourced polymers. The chemical, miscibility and rheological behavior of the binder formulation were investigated.
- 18 August 2015
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 83 (9-12) , 1659-1670
Elaboration of polypropylene/carbon nanotubes by twin-screw mixer and identification of rheological behavior
- 18 August 2015
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 83 (9-12) , 1659-1670
Elaboration of polypropylene/carbon nanotubes by twin-screw mixer and identification of rheological behavior
- 11 January 2012
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 70 (10) , 1290-1304
A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding
- 11 January 2012
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 70 (10) , 1290-1304
A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding
- 1 April 2010
- Published by Springer Nature in International Journal of Material Forming
- Vol. 3 (S1) , 607-610
Numerical Modelling of the Polymers Replication in Micro-Cavities by the Roll Embossing Process
- 1 April 2010
- Published by Springer Nature in International Journal of Material Forming
- Vol. 3 (S1) , 607-610
Numerical Modelling of the Polymers Replication in Micro-Cavities by the Roll Embossing Process
- 1 August 2009
- Published by Springer Nature in International Journal of Material Forming
- Vol. 2 (S1) , 709-712
Mixing and Characterisation of stainless steel 316L feedstock
- 1 August 2009
- Published by Springer Nature in International Journal of Material Forming
- Vol. 2 (S1) , 709-712
Mixing and Characterisation of stainless steel 316L feedstock
- 12 April 2008
- Published by Springer Nature in International Journal of Material Forming
- Vol. 1 (S1) , 25-28
Experiments and identification in micro powder injection moulding from stainless steel powder 5μm size
- 12 April 2008
- Published by Springer Nature in International Journal of Material Forming
- Vol. 1 (S1) , 25-28
Experiments and identification in micro powder injection moulding from stainless steel powder 5μm size
- 6 April 2008
- Published by Springer Nature in International Journal of Material Forming
- Vol. 1 (1) , 695-698
The bi-phasic numerical simulation of metal co-injection molding
- 6 April 2008
- Published by Springer Nature in International Journal of Material Forming
- Vol. 1 (1) , 695-698
The bi-phasic numerical simulation of metal co-injection molding
- 1 July 2004
- Published by EDP Sciences in Mécanique & Industries
- Vol. 5 (4) , 429-440
Ségrégation de phases dans les écoulements de polymères fondus chargés en poudres métalliques
Mechanics & Industry, An International Journal on Mechanical Sciences and Engineering Applications
- 1 July 2004
- Published by EDP Sciences in Mécanique & Industries
- Vol. 5 (4) , 429-440
Ségrégation de phases dans les écoulements de polymères fondus chargés en poudres métalliques
Mechanics & Industry, An International Journal on Mechanical Sciences and Engineering Applications
- 20 December 2003
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 143-144, 11-17
Influence of material and process parameters on bursting during hydroforming process
- 20 December 2003
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 143-144, 11-17
Influence of material and process parameters on bursting during hydroforming process