CAChristophe Aristégui

Christophe Aristégui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Christophe Aristégui has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Soft porous materials with ultra-low sound speeds in acoustic metamaterials

    by Thomas Brunet, Olivier Poncelet, Christophe Aristégui, Jacques Leng, Olivier Mondain-Monval

    Porous media have unique acoustic properties that have been intensively studied for many decades and found many applications in various areas. Owing to their low sound speed, porous materials have proven to be interesting key elements for the realization of acoustic metamaterials since they may act as strong Mie-type resonators, when shaped as spherical particles [1]. In that context, soft porous silicone rubbers are ideal “ultra-slow” materials since a sudden drop of the longitudinal sound speed cL with the porosity Φ has been observed in these porous materials (cL < 100 m/s for Φ < 10%). Such unusual behavior is well captured by simple models based on low-frequency approximations of multiple scattering theories [2]. Then, I will discuss the interest of these “ultra-slow” particles for acoustic metamaterials of which the acoustic index has been shown to be negative [3]. At last, I will demonstrate that the exotic values of the acoustic index may be tuned by using other porous particles such as xerogel beads [4]. [1] Brunet et al., Science 342, 323 (2013). [2] Ba et al., Scientific Reports 7, 40106 (2017). [3] Brunet et al., Nature Materials 14, 384 (2015). [4] Raffy et al., Advanced Materials 28, 1760 (2016).


  • Negative refraction experiments in soft 3D metafluids

    by Thomas Brunet, Artem Kovalenko, Benoit Tallon, Olivier Mondain-Monval, Christophe Aristégui, Olivier Poncelet

    Physics of negative refraction has been intensively studied since the 2000s. Negative refraction is usually evidenced by a Snell’s law experiment using a prism shaped negative-index metamaterial wedge. The first experimental verification of negative index of refraction was reported in 2D resonant structures at microwave frequencies [1]. A few years later, negative refraction was demonstrated in 2D and 3D resonant optical metamaterials [2]. In acoustics, the first experimental demonstration of negative refraction was reported in 3D (non resonant) phononic crystals at ultrasonic frequencies [3]. However, 3D acoustic (random) metamaterials should also offer the possibility to explore this exotic phenomenon since the first 3D locally resonant metamaterial with a negative index has been recently demonstrated [4]. In this talk, we will report on negative refraction experiments performed in these soft 3D metafluids composed of macro-porous micro-beads randomly dispersed in a water-based gel-matrix. Negative refraction will be demonstrated by the negative deflection of an ultrasonic beam outgoing from a prism shaped metafluid in a water tank experiment. [1] Shelby et al., Science 292, 77 (2001). [2] Valentine et al., Nature 455, 376 (2008). [3] Yang et al., Phys. Rev. Lett. 93, 024301 (2004). [4] Brunet et al., Nat. Mater. 14, 384 (2015).


  • Acoustic metafluids with multiple negative-index bands

    by Thomas Brunet, Olivier Poncelet, Christophe Aristegui, Jacques Leng, Olivier Mondain-Monval

    The extraordinary properties of acoustic (random) metamaterials, such as negative refractive index, originate from low frequency resonances of sub-wavelength particles. While most of these functional materials are fabricated by mechanical engineering, we have recently shown that soft matter techniques coupled with microfluidics open a new synthesis route for acoustic metamaterials especially for ultrasonics [1]. As a demonstration, we have achieved 3D-bulk acoustic metafluids with an alternatively low, zero, and negative index by producing large amounts of calibrated soft porous micro-spheres, acting like strong Mie resonators [2]. The wide variety of physico-chemical processes offered by chemical engineering allows for the tuning of the resonant particle properties over a broad range of mechanical/acoustical parameters. In this talk we show that, according to a fine control of the Poisson coefficient of the macro-porous resonators, it is not only possible to achieve soft acoustic metamaterial with one negative band, but also with two separate and tunable ones [3]. As both their width and depth depend on particle properties, the “soft approach” should benefit the design and fabrication of building-block composites with specific extreme properties required in some targeted applications, such as spatial control of sound for beamforming or cloaking. [1] Brunet et al., Science342, 323–324 (2013). [2] Brunet et al., Nat. Mater.14, 384–388 (2015). [3] Raffy et al., Adv. Mater.DOI: 10.1002/adma.201503524 (2016).

  • Soft 3D acoustic metamaterials

    by Thomas Brunet, Olivier Poncelet, Christophe Aristégui, Jacques Leng, Olivier Mondain-Monval

    One of the current challenges in the field of metamaterials is to extend beyond electromagnetism in other areas such as acoustics [1]. Soft matter techniques coupled with microfluidics provide a unique tool to take up this challenge because they allow for the production of 3D locally resonant (random) materials composed of various soft resonators [2]. The Mie (or cavity) resonators are interesting key elements for acoustic metamaterials since they may induce strong acoustic resonances provided large sound-speed contrasts between the inclusions and the host matrix [3]. For example, the use of “slow” (deformable) ferrofluid-droplets allows for the tuning of sharp Mie resonances, thanks to external magnetic fields [4]. For much higher sound-speed contrasts, we have recently shown that strong Mie resonances of “ultra-slow” beads made of soft porous silicone rubbers [5] could induce strong dispersion effects leading to materials with exotic (zero, negative) values of the acoustic index [6]. [1] Wegener, Science 342, 939–940 (2013). [2] Brunet et al., Science 342, 323–324 (2013). [3] Li and Chan, Phys. Rev. E 70, 055602 (2004). [4] Brunet et al., Phys. Rev. Letters 111, 264301 (2013). [5] Zimny et al., Langmuir 31, 3215–3221 (2015). [6] Brunet et al., Nature Mater. 14, 384–388 (2015).


  • Scattering of seismic waves by a fracture zone containing randomly distributed frictional cracks

    by Mihai Caleap, Christophe Aristegui

    An investigation is conducted how the geometrical properties of a crack distribution in a fault fracture zone and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident seismic waves. All cracks are assumed to be either aligned or randomly oriented. The crack width is assumed to obey a power law distribution, according to seismological knowledge. The crack surface is assumed to be stress‐free, or to undergo viscousfriction. To deal with cracks under high confining pressure, the latter case will be more realistic than the stress‐free crack, due to the existence of fluid in the earth's crust and the viscoelastic response of contacting solid material to seismic waves under high confining pressure. When the crack distribution is statistically homogeneous, the calculated dispersion and attenuation exhibit that the variance of crack size affects in different way the coherent wave. The analysis on the effect of the friction shows that the crackscattering decreases as the viscosity increases, which is expected since for high viscosity, the crack faces remain almost welded to each other. The results obtained in this work will be applicable to the state close to the occurrence time in large earthquakes.

  • SH surface wave in multicracked solids

    by Olivier Poncelet, Stanislav V. Golkin, Christophe Aristegui, Mihai Caleap, Alexander Shuvalov

    We focus on the dispersion spectra of surface coherent waves in damaged semi‐infinite elastic solids. The damage region is located within the surface layer containing depth‐depending concentration of parallel closed cracks. The dispersion equation is similar to that for the Love waves in a coated substrate, except that the layer's effective elastic properties, being deduced from multiple scatteringtheory, are frequency‐dependent and complex. For healthy elastic solids, the grazing SH wave is nondispersive. The dispersion under study is induced by the presence of cracks. The effect of both the magnitude of crack‐concentration and its profile into the depth is investigated. The reliability of the semianalytical predictions is also discussed through a comparison with the numerical results obtained by using a finite‐difference code.