XZXueping Zhang

Xueping Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xueping Zhang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Oilstone Processing and Its Impact on the Surface Texture of Cylinder Bore

    by Xin Zhang, Xijuan Liu, Xueping Zhang

    Honing is one of the abrasive-based machining processes to remove material through the asperity interaction between numerous stochastic grains distributed on oilstone (also called honing stone) and workpiece. Therefore, the oilstone surface topography characterized by grain morphology, size, posture and position distribution, protrusion heights and etc. is of great significance to understand honing mechanism in terms of establishing an accurate kinematic model and further analyzing the oilstone property's impact on honing process and honed surface texture characteristics including groove density, roughness heights, and plateau/valley amplitudes. Conventionally, two typical approaches have been employed to establish the surface topography of abrasive-based cutting tools: experimentally microscopic observation and backward modeling/simulation from the assumed ideal distribution laws such as Gaussian or uniform distribution for stochastic grain characteristics. The first method is usually time-consuming and only measures surface topography within rather small area, whereas the second one is highly dependent on the authenticity of assumed statistical distribution laws. To overcome these weaknesses, the research proposed a functional forward method (FFM) to accurately predict surface topography of oilstone based on simulating its manufacturing processes in succession to avoid distributional assumptions and geometrical simplification. The methodology takes into consideration five important stochastic characteristics of oilstone including grain morphology, size, posture, position distribution, and grain wear during honing process, to guarantee the credibility, authenticity, and generality of the surface topography generated from honing. Based on the oilstone surface topography, the kinematic simulation method (KISM) was applied to analyze the honed surface texture characteristics of cylinder bore with oilstone samples under different stirring times. Therefore, the methodology bridges oilstone manufacturing parameters, oilstone surface topography, and further the honed surface texture to provide a fresh insight into the parameter’s optimization of the oilstone manufacturing process by achieving a better control on the honed surface texture of the cylinder bore.


  • Open Access

    Free-Floating Dynamic Material Removal Mechanism

    by Xin Zhang, Xueping Zhang

    Honing is an abrasive-based superfinishing process to generate desired dimensional accuracy and functional surface texture. To predict dimensional accuracy of honed components, it is necessary to address and establish an accurate material removal model. However, honing operation differs from other abrasive-based material removal processes such as grinding and polishing in terms of its unique dynamic floating characteristic in the finishing of hole parts such as cylinder bore, adding complexity and difficulty when constructing material removal models. The existing material removal models concerning honing tend to consider the effects of honing trajectory density, pressure, speed and oilstone properties, which are, in essence, the static analysis and ignores the free-floating of honing tools. Therefore, the paper proposed an original honing material removal model based on minimum energy principle to incorporate the effect of free-floating characteristic of honing tool inside hole parts into model. In minimizing constructed objective function 𝐹𝑜𝑏𝑗𝑒𝑐𝑡𝑖𝑣𝑒 from material removal matrixes of all oilstones distributing on honing head, the model identified the stable spatial position of honing head inside cylinder bore after free-floating, based on which, the material removal matrix corresponding to each oilstone can be identified. Thus, the oilstones’ material cutting processes are dynamically connected with each other, overcoming the static and independent analysis for existing researches. To validate the authenticity and credibility of proposed model, the single stage honing experiment was conducted, and the results showed that simulated inner wall profile after honing using proposed material removal model presented consistency with experimental results in terms of bore diameter enlarging effect and inner wall profile error reflection effect. Furthermore, the simulated results predicted leveling effect for inner wall profile to improve roundness and cylindricity error of cylinder bore, which is the fundamental mechanism of honing but not observed in experiments due to possible exterior errors introduced

  • Enhanced Hybrid Model to Predict the Surface Roughness of Honed Cylinder Bore

    by Burhan Afzal, Xueping Zhang, Anil K. Srivastava

    Cylinder bore honing is a finishing process that generates a crosshatch pattern with alternate valleys and plateaus responsible for enhancing lubrication and preventing gas and oil leakage in the engine cylinder bore. The required functional surface in the cylinder bore is generated by a sequential honing process and is characterized by Rk roughness parameters (Rk, Rvk, Rpk, Mr1, Mr2). Predicting the desired surface roughness relies primarily on two techniques: (i) analytical models (AM) and (ii) machine learning (ML) models. Both of these techniques offer certain advantages and limitations. AM's are interpretable as they indicate distinct mapping relation between input variables and honed surface texture. However, AM's are usually based on simplified assumptions to ensure the traceability of multiple variables. Consequently, their prediction accuracy is adversely impacted when these assumptions are not satisfied. However, ML models accurately predict the surface texture but their prediction mechanism is challenging to interpret. Furthermore, the ML models' performance relies heavily on the representativeness of data employed in developing them. Thus, either prediction accuracy or model interpretability suffers when AM and ML models are implemented independently. This study proposes a hybrid model framework to incorporate the benefits of AM and ML simultaneously. In the hybrid model, an Artificial neural network (ANN) compensates the AM by correcting its error. This retains the physical understanding built into the model while simultaneously enhancing the prediction accuracy. The proposed approach resulted in a hybrid model that significantly improved the prediction accuracy of the AM and additionally provided superior performance compared to independent ANN.


  • Analytically Predicating the Multi-Dimensional Accuracy of the Honed Engine Cylinder Bore

    by Xueping Zhang, Zaoyang Zhou, Zhenqiang Yao, Lifeng Xi

    The dimensional accuracy of engine cylinder bore at multiscale has a tremendous influence on engine performances including friction power loss, vibration, leak tightness between piston and cylinder, and wear resistance. Tremendous researches were devoted to predict the dimensional accuracies of the honed cylinder by means of analytical, experimental, and numerical simulation methods. The dimensional quality of the honed cylinder bore was usually determined by establishing the relationship between honing parameters and dimensional accuracies of the honed cylinder bore. However, most researches predicted dimensional accuracy at macroscale or surface texture at microscale, respectively. Few efforts were devoted to predict the dimensional quality of honed cylinder bore at both macroscale and microscale levels simultaneously. To explore a new understanding of the honing mechanism of the cylinder bore, a multiscale model is proposed to predict the dimensional accuracy and surface texture of cylinder bore generated from the honing process at the macroscale and microscale simultaneously. The model aims to integrate both microscale factors including honing stone abrasives distribution, abrasive wear process, previous cylinder surface topography, and macroscale factors including cylinder geometric features and honing head motion trajectory into a multiscale analytical analysis. A force matching method is adopted in the multiscale predictive model to determine the feed depth in the honing of the cylinder bore. Thus, the proposed multiscale analytical model possesses an excellent capacity to simultaneously predict the roundness and cylindricity of the honed cylinder bore, as well as the surface texture/roughness of the honed cylinder bore in terms of Abbott-Firestone curve. The simulated results also revealed that the material removal process is closely related to the initial shape deviations of the cylinder bore, which cannot be corrected, compensated, or eliminated by the subsequent honing process given the deviations are associated with wavelengths higher than 27 mm under the given honing condition.


  • Honed surface multi-scale Prediction based on multi-stage honing process of engine cylinder bore

    by Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi

    Sequential honing process is usually implemented in engine cylinder bore processing to obtain the cross-hatched surface texture with excellent function to balance lubricant storage capacities and supporting performance. Many researches have devoted to correlating honed surface quality of cylinder bore with honing process parameters by means of experiments or simulations. Quite a few efforts have addressed the effect of sequential multiple steps on the surface texture in the honing of engine cylinder bore. However, these researches cannot provide an explicit and analytical methodology to predict honed surface texture efficiently and accurately. This paper presents an analytical and explicit methodology to incorporate a proposed microscale abrasive model into the analytical simulation process of sequential honing. The proposed abrasive model synthetically considers the shape, size, posture, and position of abrasives randomly distributed in honing stone, which is incorporated into honing head motions in terms of rotation, oscillation and feeding. The kinematics of honing head is calculated by space-time discretization to capture the interaction between honing stones and cylinder bore surface. The above procedure acts as each single step for the sequential honing processes. This study investigates the sequential honing of two stages including semi-finish honing and plateau honing at different feeding speeds by applying the abrasive model with different abrasive sizes. The formation of cross-hatched surface texture was successfully achieved sequentially by semi-finish honing and plateaus honing. Then the Abbott-Firestone Curve of the honed surface can be obtained to analyze the influences of abrasive size and honing time of two stages on the surface roughness. Correctness of surface roughness predicted by the model is verified by comparing with a group of experiment measurements in terms of Abbott-Firestone Curve. Most errors of all the predicted Rk roughness family roughness parameters in the two honing stages are less than 15%. Based on the model, simulations are done to analyze the influences of abrasive size and honing duration time of two stages on the surface roughness. The result shows that the larger abrasive used in finish honing leads to the decrease of the material portions Mr1, Mr2 and the increase of the reduced valley depth Rvk. The longer plateau honing duration time is preferred to produce the larger Mr1, Mr2 and the smaller Rvk.


  • Effect of form errors on oil film characteristics of hydrodynamic journal bearings based on small displacement torsor theory

    by Xun Ma, Wubin Xu, Xueping Zhang, Fuyong Yang

    Purpose: This paper aims to investigate how form error of journal affects oil film characteristics, which are composed of several parameters including the maximum film pressure, film moment, frictional coefficient and carrying-load capacity. Design/methodology/approach: A new generalized equation based on the small displacement torsor theory is derived, as well as its capability of representing types of form error on the journal, using four specified parameters in a three-dimensional (3D) state. Based on the new generalized equation of form errors, the Reynolds equation is represented and solved numerically using the Swift–Stieber boundary condition. Findings: The results show that the form errors of journal have significant influence on all oil film characteristics. However, the film moment remains nearly unchanged as film characteristics, especially eccentricity ratio, become large. All film characteristics investigated vary periodically as the form error. More importantly, it is found that the film pressure distribution transforms to an asymmetric shape along the axial direction of the bearing, no longer a symmetric shape in the case of two-dimensional (2D) form errors. It is necessary to substitute the 3D form error model, which takes the variations of the film characteristics in axial direction into account, for the 2D model in the designing stage of journal bearings. Originality/value: First, the effect of the form error of the journal on the performance of hydrodynamic journal bearings is studied in the view of the film characteristics systematically. Secondly, the new generalized equation of form error, derived by SDT theory, is capable of representing any types of form error on the journal, not only representing one type of form error merely.


  • A Coupled Model for the Prediction of Surface Variation in Face Milling Large-Scale Workpiece With Complex Geometry

    by Shun Liu, Sun Jin, Xue-Ping Zhang, Kun Chen, Ang Tian, Li-Feng Xi

    Face milling commonly generates surface quality of variation, is especially severe for milling of large-scale components with complex surface geometry such as cylinder block, engine head, and valve body. Thus surface variation serves as an important indicator both for machining parameter selection and components' service performance such as sealing, energy consumption, and emission. An efficient and comprehensive numerical model is highly desired for the prediction of surface variation of entire surface. This study proposes a coupled numerical simulation method, updating finite element (FE) model iteratively based on integration of data from abaqus and matlab, to predict surface variation induced by face milling of large-scale components with complex surfaces. Using the coupled model, three-dimensional (3D) variation of large-scale surface can be successfully simulated by considering face milling process including dynamic milling force, spiral curve of milling trajectory, and intermittently rotating contact characteristics. Surface variation is finally represented with point cloud from iterative FE analysis and verified by face milling experiment. Comparison between measured and predicted results shows that the new prediction method can simulate surface variation of complex components well. Based on the verified model, a set of analyses are conducted to evaluate the effects of local stiffness nonhomogenization and milling force variation on machined surface variation. It demonstrates that surface variation with surface peaks and concaves is strongly correlated with local stiffness nonhomogenization especially in feed direction. And thus the coupled prediction method provides a theoretical and efficient way to study surface variation induced by face milling of large-scale complex components.