Nikos Tsourveloudis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nikos Tsourveloudis has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Lefteris Doitsidis
Technical University of Crete
5 shared publications - Polychronis Spanoudakis
School of Production Engineering & Management, Technical University of Crete, 73100 Chania, Greece
4 shared publications - Athanasios Tsalatsanis
Office of Research, Research Methodology and Biostatistics Core, University of South Florida, Tampa, FL 33612, USA
2 shared publications - Kimon P. Valavanis
Ritchie School of Engineering and Computer Science, University of Denver, Denver, USA
2 shared publications - Nikos I. Vitzilaios
Technical University of Crete
2 shared publications - Savvas Piperidis
Intelligent Systems and Robotics Laboratory, School of Production Engineering and Management, Technical University of Crete, 73100 Chania, Greece
2 shared publications
Latest Publications
- Open Access
A ROS-Based Energy Management System for a Prototype Fuel Cell Hybrid Vehicle
The automotive industry has been rapidly transforming and moving further from internal combustion engines, towards hybrid or electric vehicles. A key component for the successful adoption of the aforementioned approach is their Energy Management Systems (EMSs). In the proposed work, we describe in detail a custom EMS, with unique characteristics, which was developed and installed in a hydrogen-powered prototype vehicle. The development of the EMS was based on off-the-shelf components and the adoption of a Robot Operating System (ROS), a meta-operating system developed for robotic-oriented applications. Our approach offers soft real-time control and the ability to organize the controller of the EMS as a straightforward and comprehensive message system that provides the necessary inter-process communication at the core of the EMS control procedure. We describe in detail the software-based implementation and validate our approach through experimental results obtained while the prototype was racing in a low-energy consumption competition.
Open AccessA ROS-Based Energy Management System for a Prototype Fuel Cell Hybrid Vehicle
The automotive industry has been rapidly transforming and moving further from internal combustion engines, towards hybrid or electric vehicles. A key component for the successful adoption of the aforementioned approach is their Energy Management Systems (EMSs). In the proposed work, we describe in detail a custom EMS, with unique characteristics, which was developed and installed in a hydrogen-powered prototype vehicle. The development of the EMS was based on off-the-shelf components and the adoption of a Robot Operating System (ROS), a meta-operating system developed for robotic-oriented applications. Our approach offers soft real-time control and the ability to organize the controller of the EMS as a straightforward and comprehensive message system that provides the necessary inter-process communication at the core of the EMS control procedure. We describe in detail the software-based implementation and validate our approach through experimental results obtained while the prototype was racing in a low-energy consumption competition.
- Open Access
- 7 November 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (21) , 9254
Efficient Gear Ratio Selection of a Single-Speed Drivetrain for Improved Electric Vehicle Energy Consumption
The electric vehicle (EV) market has grown over the last few years and even though electric vehicles do not currently possess a high market segment, it is projected that they will do so by 2030. Currently, the electric vehicle industry is looking to resolve the issue of vehicle range, using higher battery capacities and fast charging. Energy consumption is a key issue which heavily effects charging frequency and infrastructure and, therefore, the widespread use of EVs. Although several factors that influence energy consumption of EVs have been identified, a key technology that can make electric vehicles more energy efficient is drivetrain design and development. Based on electric motors’ high torque capabilities, single-speed transmissions are preferred on many light and urban vehicles. In the context of this paper, a prototype electric vehicle is used as a test bed to evaluate energy consumption related to different gear ratio usage on single-speed transmission. For this purpose, real-time data are recorded from experimental road tests and a dynamic model of the vehicle is created and fine-tuned using dedicated software. Dynamic simulations are performed to compare and evaluate different gear ratio set-ups, providing valuable insights into their effect on energy consumption. The correlation of experimental and simulation data is used for the validation of the dynamic model and the evaluation of the results towards the selection of the optimal gear ratio. Based on the aforementioned data, we provide useful information from numerous experimental and simulation results that can be used to evaluate gear ratio effects on electric vehicles’ energy consumption and, at the same time, help to formulate evolving concepts of smart grid and EV integration.
- 7 November 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (21) , 9254
Open AccessEfficient Gear Ratio Selection of a Single-Speed Drivetrain for Improved Electric Vehicle Energy Consumption
The electric vehicle (EV) market has grown over the last few years and even though electric vehicles do not currently possess a high market segment, it is projected that they will do so by 2030. Currently, the electric vehicle industry is looking to resolve the issue of vehicle range, using higher battery capacities and fast charging. Energy consumption is a key issue which heavily effects charging frequency and infrastructure and, therefore, the widespread use of EVs. Although several factors that influence energy consumption of EVs have been identified, a key technology that can make electric vehicles more energy efficient is drivetrain design and development. Based on electric motors’ high torque capabilities, single-speed transmissions are preferred on many light and urban vehicles. In the context of this paper, a prototype electric vehicle is used as a test bed to evaluate energy consumption related to different gear ratio usage on single-speed transmission. For this purpose, real-time data are recorded from experimental road tests and a dynamic model of the vehicle is created and fine-tuned using dedicated software. Dynamic simulations are performed to compare and evaluate different gear ratio set-ups, providing valuable insights into their effect on energy consumption. The correlation of experimental and simulation data is used for the validation of the dynamic model and the evaluation of the results towards the selection of the optimal gear ratio. Based on the aforementioned data, we provide useful information from numerous experimental and simulation results that can be used to evaluate gear ratio effects on electric vehicles’ energy consumption and, at the same time, help to formulate evolving concepts of smart grid and EV integration.
- Open Access
- 1 September 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (17) , 6063
Design and Structural Analysis of a Front Single-Sided Swingarm for an Electric Three-Wheel Motorcycle
This study focuses on the structural analysis of the front single-sided swingarm of a new three-wheel electric motorcycle, recently designed to meet the challenges of the vehicle electrification era. The primary target is to develop a swingarm capable of withstanding the forces applied during motorcycle’s operation and, at the same time, to be as lightweight as possible. Different scenarios of force loadings are considered and emphasis is given to braking forces in emergency braking conditions where higher loads are applied to the front wheels of the vehicle. A dedicated Computer Aided Engineering (CAE) software is used for the structural evaluation of different swingarm designs, through a series of finite element analysis simulations. A topology optimization procedure is also implemented to assist the redesign effort and reduce the weight of the final design. Simulation results in the worst-case loading conditions, indicate strongly that the proposed structure is effective and promising for actual prototyping. A direct comparison of results for the initial and final swingarm design revealed that a 23.2% weight reduction was achieved.
- 1 September 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (17) , 6063
Open AccessDesign and Structural Analysis of a Front Single-Sided Swingarm for an Electric Three-Wheel Motorcycle
This study focuses on the structural analysis of the front single-sided swingarm of a new three-wheel electric motorcycle, recently designed to meet the challenges of the vehicle electrification era. The primary target is to develop a swingarm capable of withstanding the forces applied during motorcycle’s operation and, at the same time, to be as lightweight as possible. Different scenarios of force loadings are considered and emphasis is given to braking forces in emergency braking conditions where higher loads are applied to the front wheels of the vehicle. A dedicated Computer Aided Engineering (CAE) software is used for the structural evaluation of different swingarm designs, through a series of finite element analysis simulations. A topology optimization procedure is also implemented to assist the redesign effort and reduce the weight of the final design. Simulation results in the worst-case loading conditions, indicate strongly that the proposed structure is effective and promising for actual prototyping. A direct comparison of results for the initial and final swingarm design revealed that a 23.2% weight reduction was achieved.
- Open Access
Experimental Research of Transmissions on Electric Vehicles’ Energy Consumption
The growth of electric vehicles share of total passenger-vehicle sales is evident and is expected to be a very big market segment by 2030. Range of travel and pricing are the most influencing factors that affect their gain in market share. As so, powertrain development is a key technology factor researched by the automotive industry. To explore, among others, how the energy consumption of zero emission vehicles is affected by different transmissions, we developed, built and installed a variety of them on a custom hydrogen fuel cell powered urban vehicle. In this work we present a comparison of the effect, on the energy consumption of the proposed testbed, of a prototype custom build 2-speed gearbox and a single stage transmission. Results presented show a reduction of the overall energy consumption with the use of the 2-speed gearbox, compared to single stage, as well as the effect of gear change speed, related to speed, in energy consumption. Finally, a correlation of experimental results using a custom build CVT is conducted compared to single stage transmission. A comparison to simulation results found in literature is performed for all the transmissions tested on road.
Open AccessExperimental Research of Transmissions on Electric Vehicles’ Energy Consumption
The growth of electric vehicles share of total passenger-vehicle sales is evident and is expected to be a very big market segment by 2030. Range of travel and pricing are the most influencing factors that affect their gain in market share. As so, powertrain development is a key technology factor researched by the automotive industry. To explore, among others, how the energy consumption of zero emission vehicles is affected by different transmissions, we developed, built and installed a variety of them on a custom hydrogen fuel cell powered urban vehicle. In this work we present a comparison of the effect, on the energy consumption of the proposed testbed, of a prototype custom build 2-speed gearbox and a single stage transmission. Results presented show a reduction of the overall energy consumption with the use of the 2-speed gearbox, compared to single stage, as well as the effect of gear change speed, related to speed, in energy consumption. Finally, a correlation of experimental results using a custom build CVT is conducted compared to single stage transmission. A comparison to simulation results found in literature is performed for all the transmissions tested on road.
- 1 January 2014
- Published by Springer Nature
- p. 1
Bio-inspired Robots: Learning from Nature
- 5 May 2010
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 60 (3-4) , 513-530
Predictive Modeling of the Ti6Al4V Alloy Surface Roughness
- 5 May 2010
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 60 (3-4) , 513-530
Predictive Modeling of the Ti6Al4V Alloy Surface Roughness
- 31 January 2010
- Published by Elsevier in Neurocomputing
- Vol. 73 (4-6) , 648-654
On the evolutionary-fuzzy control of WIP in manufacturing systems
- 31 January 2010
- Published by Elsevier in Neurocomputing
- Vol. 73 (4-6) , 648-654
On the evolutionary-fuzzy control of WIP in manufacturing systems
- 1 January 2009
- Published by Springer Nature
- p. 153-166
Safe Test Flights for Small Rotorcrafts
- 3 October 2008
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 54 (5) , 769-794
An Experimental Test Bed for Small Unmanned Helicopters
- 3 October 2008
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 54 (5) , 769-794
An Experimental Test Bed for Small Unmanned Helicopters
- 25 February 2008
- Published by Springer Nature
- p. 309-340
Evolutionary Algorithm Based Path Planning for Multiple UAV Cooperation
- 25 February 2008
- Published by Springer Nature
- p. 309-340
Evolutionary Algorithm Based Path Planning for Multiple UAV Cooperation