Adrian Samuila
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Adrian Samuila has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Lucian Dascalescu
PPRIME Inst., Univ. of Poitiers-ENSMA, Angouleme, France
2 shared publications Ciprian Dragan
Institute PPRIME, UPR 3346, CNRS, University of Poitiers-ENSMA, IUT, Angoulême Cedex, France
1 shared publication- Gabriel Lucian Radu
Centre of Bioanalysis, National Institute of Research and Development for Biological Sciences, 296 Splaiul Independentei, 060031 Bucharest, Romania
1 shared publication Gabriela Buda
High Intensity Electric Fields Laboratory, Technical University of Cluj Napoca , Cluj Napoca , Romania
1 shared publicationLaur Calin
Institute PPRIME, UPR 3346, CNRS, University of Poitiers-ENSMA, IUT, Angoulême Cedex, France
1 shared publication- Lucian Dascalescu
PPRIME Institute, CNRS, University of Poitiers, ENSMA, 4 av. Varsovie, 16021 Angoulême, France
1 shared publication
Latest Publications
- 2 January 2014
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 32 (2) , 138-143
Premises for Statistic Control of a Tribocharging Process for Granular Materials
This article aims to identify the appropriate sampling duration for a tribocharging process on a vibratory feeder device in order to compute the capability indexes and set up a statistical control procedure. The outcome of the process is evaluated as the ratio between the charge and the mass of the granules that exit the tribocharging device during a given laps of time. A virtual instrument developed in LabWiew was used in conjunction with a Faraday cage connected to an electrometer and with an electronic scale, to simultaneously measure the charge and the mass of tribocharged granular plastics, for fixed sampling durations.
- 2 January 2014
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 32 (2) , 138-143
Premises for Statistic Control of a Tribocharging Process for Granular Materials
This article aims to identify the appropriate sampling duration for a tribocharging process on a vibratory feeder device in order to compute the capability indexes and set up a statistical control procedure. The outcome of the process is evaluated as the ratio between the charge and the mass of the granules that exit the tribocharging device during a given laps of time. A virtual instrument developed in LabWiew was used in conjunction with a Faraday cage connected to an electrometer and with an electronic scale, to simultaneously measure the charge and the mass of tribocharged granular plastics, for fixed sampling durations.
- 19 May 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 47 (4) , 1922-1928
Tribocharging of Mixed Granular Plastics in a Fluidized-Bed Device
The output of any electrostatic separation process is strongly dependent on the effectiveness of particle charging. The aim of the present paper is to evaluate the effects of several factors that might influence the efficiency of a fluidized bed tribocharger, in the presence of an electric field orthogonally oriented to the direction of the fluidization air. The experiments were carried out on several synthetic mixtures of binary granular mixtures. The velocity of the fluidization air, the duration of the tribocharging process, and the composition of the mixture were the three process variables investigated. Whenever possible, the effects of these variables on the output of the process (i.e., the mass and the charge of the granules collected at the electrodes), were evaluated using the experimental design methodology. The results of full- and composite-factorial experimental designs were analyzed with a commercial software (MODDE 5.0, Umetrics). The effectiveness of the charging process was found to depend significantly on each of these factors. The propitious aerodynamic design of the device is a prerequisite for the successful industry application of the technique.
- 19 May 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 47 (4) , 1922-1928
Tribocharging of Mixed Granular Plastics in a Fluidized-Bed Device
The output of any electrostatic separation process is strongly dependent on the effectiveness of particle charging. The aim of the present paper is to evaluate the effects of several factors that might influence the efficiency of a fluidized bed tribocharger, in the presence of an electric field orthogonally oriented to the direction of the fluidization air. The experiments were carried out on several synthetic mixtures of binary granular mixtures. The velocity of the fluidization air, the duration of the tribocharging process, and the composition of the mixture were the three process variables investigated. Whenever possible, the effects of these variables on the output of the process (i.e., the mass and the charge of the granules collected at the electrodes), were evaluated using the experimental design methodology. The results of full- and composite-factorial experimental designs were analyzed with a commercial software (MODDE 5.0, Umetrics). The effectiveness of the charging process was found to depend significantly on each of these factors. The propitious aerodynamic design of the device is a prerequisite for the successful industry application of the technique.
- 19 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 45 (3) , 1074-1078
Numerical and Experimental Modeling of Star-Connected Three-Phase Capacitors
This paper is aimed at characterizing two possible designs of star-connected three-phase capacitors developed for utilization with the protection schemes of industrial installations. A superficial charge simulation program was employed for estimating the capacitances of one design. The results pointed out the influence of various geometrical parameters on the magnitude of the mutual capacitance between the armatures of any two of the three elementary capacitors of the three-phase unit. The experimental results confirmed the theoretical predictions and validated the advantageous features of a second design, which ensured balanced mutual capacitances between the three phases.
- 19 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 45 (3) , 1074-1078
Numerical and Experimental Modeling of Star-Connected Three-Phase Capacitors
This paper is aimed at characterizing two possible designs of star-connected three-phase capacitors developed for utilization with the protection schemes of industrial installations. A superficial charge simulation program was employed for estimating the capacitances of one design. The results pointed out the influence of various geometrical parameters on the magnitude of the mutual capacitance between the armatures of any two of the three elementary capacitors of the three-phase unit. The experimental results confirmed the theoretical predictions and validated the advantageous features of a second design, which ensured balanced mutual capacitances between the three phases.