Jacek Buśkiewicz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jacek Buśkiewicz has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Tomasz Walczak
Poznan University of Technology
2 shared publications D Rybarczyk
1 shared publicationGrzegorz Pittner
1 shared publication- Jakub Krzysztof Grabski
Poznan University of Technology
1 shared publication M Niechciał
1 shared publicationMartyna Michałowska
Institute of Applied Mechanics, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Jana Pawła II 24, 60-965 Poznań, Poland
1 shared publication
Latest Publications
- 2 January 2026
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 54 (1)
Design of an adjustable constant force mechanism based on graphical construction
- 2 January 2026
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 54 (1)
Design of an adjustable constant force mechanism based on graphical construction
- Open Access
- 8 August 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (10) , 1-13
The influence of assembly tolerances on functionality of an approximate constant torque generator composed of a four-bar linkage and spring
The paper integrates the design of constant torque generators, optimal mechanism synthesis, and position error analysis. The approximate constant torque generator composed of a four-bar linkage and a spring is considered. The optimal dimensions of the mechanism were determined using a synthesis heuristic method. Recently developed mechanism synthesis methods make it possible to determine geometries of the linkages that can realize the required performance with very high accuracy provided that a solution for a prescribed problem exists. However, manufacturing problems are frequently neglected, and, as a consequence, the imposed accuracy cannot be achieved when errors due to tolerances, link deformations, assembly errors, and friction are taken into account. Therefore, the objective of the paper is to study the relation between the geometrical tolerances and the accuracy of the prescribed torque generation. The worst-case error is determined using the direct linearization method for prescribed tolerance grades. Three different four-bar linkages are taken for illustrative purposes, and the general conclusions are put forward on their bases.
- 8 August 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (10) , 1-13
Open AccessThe influence of assembly tolerances on functionality of an approximate constant torque generator composed of a four-bar linkage and spring
The paper integrates the design of constant torque generators, optimal mechanism synthesis, and position error analysis. The approximate constant torque generator composed of a four-bar linkage and a spring is considered. The optimal dimensions of the mechanism were determined using a synthesis heuristic method. Recently developed mechanism synthesis methods make it possible to determine geometries of the linkages that can realize the required performance with very high accuracy provided that a solution for a prescribed problem exists. However, manufacturing problems are frequently neglected, and, as a consequence, the imposed accuracy cannot be achieved when errors due to tolerances, link deformations, assembly errors, and friction are taken into account. Therefore, the objective of the paper is to study the relation between the geometrical tolerances and the accuracy of the prescribed torque generation. The worst-case error is determined using the direct linearization method for prescribed tolerance grades. Three different four-bar linkages are taken for illustrative purposes, and the general conclusions are put forward on their bases.
- 21 November 2022
- Published by Polish Academy of Sciences Chancellery in Archive of Mechanical Engineering
- p. 571-594
Kinematic synthesis of the mechanism for static balancing of an input torque in three positions
The aim of this work is to design the links‒spring mechanism for balancing, in the three positions of the operating range, a rotary disc subjected to a torque. An energy-related approach towards the conditions of the mechanical system balance for a discrete number of positions leads to the formulation of a task of searching for a four-bar linkage which guides a coupler point through the prescribed positions, where, at the same time, geometrical conditions (specifying the spring tension) and kinematic conditions (defining the radial component of the tension change rate) are satisfied. The finitely and infinitesimally separated position synthesis is considered, however, only a component of the coupler point velocity is essential. A general method was proposed for determining the four-bar mechanism geometry. Mechanism inversion was applied in order to reduce the number of designed variables and simplify the solution method. The system of complex algebraic equations defines the problem. Linear, symbolic transformations and a systematic search technique are utilized to find multiple local optimal solutions. The problem is solved using Mathematica software.
- 21 November 2022
- Published by Polish Academy of Sciences Chancellery in Archive of Mechanical Engineering
- p. 571-594
Kinematic synthesis of the mechanism for static balancing of an input torque in three positions
The aim of this work is to design the links‒spring mechanism for balancing, in the three positions of the operating range, a rotary disc subjected to a torque. An energy-related approach towards the conditions of the mechanical system balance for a discrete number of positions leads to the formulation of a task of searching for a four-bar linkage which guides a coupler point through the prescribed positions, where, at the same time, geometrical conditions (specifying the spring tension) and kinematic conditions (defining the radial component of the tension change rate) are satisfied. The finitely and infinitesimally separated position synthesis is considered, however, only a component of the coupler point velocity is essential. A general method was proposed for determining the four-bar mechanism geometry. Mechanism inversion was applied in order to reduce the number of designed variables and simplify the solution method. The system of complex algebraic equations defines the problem. Linear, symbolic transformations and a systematic search technique are utilized to find multiple local optimal solutions. The problem is solved using Mathematica software.
- Open Access
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 710 (1)
Modelling the monopedal robot
The article describes modelling of the monopedal robot with the application of the numerical method for calculating kinematics. The first part presents a short review of the literature on monopedal robots and the theory of such designs. Due to the complexity of the natural solutions of the bipedal locomotion, the monopedal alternative simplifies the problem, by limiting its scope to the pulse movement in one axis– as required by jumping. In the subsequent part, basic mathematical and kinematic relations connected with a chosen designs. The model was based on a rigid quadrangle driven by a four-bar linkage. The effect was a set of vector equations, required to calculate its kinematics. Due to the complexity of the design, it could not be calculated using traditional analytical methods. The prepared kinematic structure was simulated using the numerical method to give the basis for the future experimental tests. The mathematical model was solved in the Wolphram Mathematica environment. Its main purpose was to analyse the movement of the final link that rests on the ground. The results from the simulation were compared to the movement parameters derived from a model designed in CAD software to verify its correctness. All values of links length and starting angular position, required to calculate the model, were taken from the said CAD project.
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 710 (1)
Open AccessModelling the monopedal robot
The article describes modelling of the monopedal robot with the application of the numerical method for calculating kinematics. The first part presents a short review of the literature on monopedal robots and the theory of such designs. Due to the complexity of the natural solutions of the bipedal locomotion, the monopedal alternative simplifies the problem, by limiting its scope to the pulse movement in one axis– as required by jumping. In the subsequent part, basic mathematical and kinematic relations connected with a chosen designs. The model was based on a rigid quadrangle driven by a four-bar linkage. The effect was a set of vector equations, required to calculate its kinematics. Due to the complexity of the design, it could not be calculated using traditional analytical methods. The prepared kinematic structure was simulated using the numerical method to give the basis for the future experimental tests. The mathematical model was solved in the Wolphram Mathematica environment. Its main purpose was to analyse the movement of the final link that rests on the ground. The results from the simulation were compared to the movement parameters derived from a model designed in CAD software to verify its correctness. All values of links length and starting angular position, required to calculate the model, were taken from the said CAD project.
- 14 June 2019
- Published by Springer Nature
- p. 1721-1730
Gravity balancing of a hoist by means of a four-bar linkage and spring
- 14 June 2019
- Published by Springer Nature
- p. 1721-1730
Gravity balancing of a hoist by means of a four-bar linkage and spring
- 17 May 2019
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 139, 443-459
The optimum distance function method and its application to the synthesis of a gravity balanced hoist
- 17 May 2019
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 139, 443-459
The optimum distance function method and its application to the synthesis of a gravity balanced hoist
- Open Access
- 25 January 2018
- Published by Polish Society of Theoretical and Applied Mechanics in Journal of Theoretical and Applied Mechanics
- Vol. 56 (1) , 43-55-55
Reduced number of design parameters in optimum path synthesis with timing of four-bar linkage
Reduced number of design parameters in optimum path synthesis with timing of four-bar linkage
- 25 January 2018
- Published by Polish Society of Theoretical and Applied Mechanics in Journal of Theoretical and Applied Mechanics
- Vol. 56 (1) , 43-55-55
Open AccessReduced number of design parameters in optimum path synthesis with timing of four-bar linkage
Reduced number of design parameters in optimum path synthesis with timing of four-bar linkage
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1922, 020006
Comparison of some evolutionary algorithms for optimization of the path synthesis problem
The paper presents comparison of the results obtained in a mechanism synthesis by means of some selected evolutionary algorithms. The optimization problem considered in the paper as an example is the dimensional synthesis of the path generating four-bar mechanism. In order to solve this problem, three different artificial intelligence algorithms are employed in this study.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1922, 020006
Comparison of some evolutionary algorithms for optimization of the path synthesis problem
The paper presents comparison of the results obtained in a mechanism synthesis by means of some selected evolutionary algorithms. The optimization problem considered in the paper as an example is the dimensional synthesis of the path generating four-bar mechanism. In order to solve this problem, three different artificial intelligence algorithms are employed in this study.
- 1 January 2018
- Published by AIP Publishing
Numerical and experimental analyses of lighting columns in terms of passive safety
Modern lighting columns have a very beneficial influence on road safety. Currently, the columns are being designed to keep the driver safe in the event of a car collision. The following work compares experimental results of vehicle impact on a lighting column with FEM simulations performed using the Ansys LS-DYNA program. Due to high costs of experiments and time-consuming research process, the computer software seems to be very useful utility in the development of pole structures, which are to absorb kinetic energy of the vehicle in a precisely prescribed way.
- 1 January 2018
- Published by AIP Publishing
Numerical and experimental analyses of lighting columns in terms of passive safety
Modern lighting columns have a very beneficial influence on road safety. Currently, the columns are being designed to keep the driver safe in the event of a car collision. The following work compares experimental results of vehicle impact on a lighting column with FEM simulations performed using the Ansys LS-DYNA program. Due to high costs of experiments and time-consuming research process, the computer software seems to be very useful utility in the development of pole structures, which are to absorb kinetic energy of the vehicle in a precisely prescribed way.