T. Komukai
Research Subjects
Research Interests
T. Komukai has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
M. Nakazawa
6 shared publicationsK. Suzuki
NTT Network Innovation Labs., NTT Corp., Kanagawa, Japan
1 shared publicationK. Tamura
1 shared publicationK. Uchiyama
NTT Network Innovation Labs., NTT Corp., Kanagawa, Japan
1 shared publication- Kohichi R. Tamura
NTT Network Innovation Laboratories, NTT Corporation Photonic Transport Network Laboratory, 1-1 Hikari-no-oka, Yokosuka, Kanagawa 239-0847, Japan
1 shared publication T. Imai
Lightwave Commun. Lab., NTT Opt. Network Syst. Lab., Yokosuka, Japan
1 shared publication
Latest Publications
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
The second and third order dispersion compensation of picosecond pulses achieved by combining two nonlinearly chirped fiber Bragg gratings
We used a combination of nonlinearly chirped fiber Bragg gratings to demonstrate for the first time to our knowledge, second- and third-order dispersion compensation for 1.6-ps and 3.5-ps pulses transmitted over a 66-km-long-shifted fiber around the zero-dispersion wavelength.
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
The second and third order dispersion compensation of picosecond pulses achieved by combining two nonlinearly chirped fiber Bragg gratings
We used a combination of nonlinearly chirped fiber Bragg gratings to demonstrate for the first time to our knowledge, second- and third-order dispersion compensation for 1.6-ps and 3.5-ps pulses transmitted over a 66-km-long-shifted fiber around the zero-dispersion wavelength.
- 13 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 14-15
Adaptive dispersion slope equalizer for dispersion-shifted fibers using a nonlinearly chirped fiber Bragg grating pair
We realized, for the first time to our knowledge, an adaptive dispersion slope equalizer (ADSE) for dispersion-shifted fibers (DSFs). We demonstrate adaptive equalization using 2 ps pulses of the dispersion changes in an 83 km DSF, induced by temperature changes between -10/spl deg/C and 60/spl deg/C. Author(s) Inui, T. NTT Network Innovation Labs., NTT Corp., Kanagawa, Japan Komukai, T. ; Nakazawa, M. ; Suzuki, K. ; Tamura, K.R. ; Uchiyama, K. ; Morioka, T.
- 13 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 14-15
Adaptive dispersion slope equalizer for dispersion-shifted fibers using a nonlinearly chirped fiber Bragg grating pair
We realized, for the first time to our knowledge, an adaptive dispersion slope equalizer (ADSE) for dispersion-shifted fibers (DSFs). We demonstrate adaptive equalization using 2 ps pulses of the dispersion changes in an 83 km DSF, induced by temperature changes between -10/spl deg/C and 60/spl deg/C. Author(s) Inui, T. NTT Network Innovation Labs., NTT Corp., Kanagawa, Japan Komukai, T. ; Nakazawa, M. ; Suzuki, K. ; Tamura, K.R. ; Uchiyama, K. ; Morioka, T.
- 1 August 1998
- Published by Elsevier in Optics Communications
- Vol. 154 (1-3) , 5-8
Fabrication of non-linearly chirped fiber Bragg gratings for higher-order dispersion compensation
- 1 August 1998
- Published by Elsevier in Optics Communications
- Vol. 154 (1-3) , 5-8
Fabrication of non-linearly chirped fiber Bragg gratings for higher-order dispersion compensation
- 1 May 1998
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 10 (5) , 687-689
Long-phase error-free fiber Bragg gratings
Stitching errors in the phase mask degrade the spectral response of fiber Bragg gratings fabricated with the phase mask technique. We successfully fabricated a stitching error-free phase mask and applied it to the fabrication of fiber Bragg gratings (FBGs). The gratings have no observable excess sidelobes in the reflectivity and show excellent wavelength selectivity.
- 1 May 1998
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 10 (5) , 687-689
Long-phase error-free fiber Bragg gratings
Stitching errors in the phase mask degrade the spectral response of fiber Bragg gratings fabricated with the phase mask technique. We successfully fabricated a stitching error-free phase mask and applied it to the fabrication of fiber Bragg gratings (FBGs). The gratings have no observable excess sidelobes in the reflectivity and show excellent wavelength selectivity.
- 1 July 1997
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 9 (7) , 934-936
An efficient 0.04-nm apodized fiber Bragg grating and its application to narrow-band spectral filtering
A narrow-band apodized fiber Bragg grating was fabricated with a phase mask method that incorporated a fluorescence monitoring technique. The grating length was 100 mm and the 3-dB reduced bandwidth was as small as 0.04 nm. The 20-dB reduced bandwidth was 0.1 nm at a center wavelength of 1554 mm. A single longitudinal oscillation mode of a 10-GHz pulse train from a mode-locked fiber laser was successfully extracted using the grating.
- 1 July 1997
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 9 (7) , 934-936
An efficient 0.04-nm apodized fiber Bragg grating and its application to narrow-band spectral filtering
A narrow-band apodized fiber Bragg grating was fabricated with a phase mask method that incorporated a fluorescence monitoring technique. The grating length was 100 mm and the 3-dB reduced bandwidth was as small as 0.04 nm. The 20-dB reduced bandwidth was 0.1 nm at a center wavelength of 1554 mm. A single longitudinal oscillation mode of a 10-GHz pulse train from a mode-locked fiber laser was successfully extracted using the grating.
- 1 November 1996
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 8 (11) , 1495-1497
Fabrication of high-quality long-fiber Bragg grating by monitoring 3.1-eV radiation (400 nm) from GeO defects
3.1-eV (400-nm) luminescence is generated by UV radiation at 244 nm and guided in a germanium-doped silica fiber. In this letter, we propose a new technique for fabricating a fiber Bragg grating by monitoring the power of this visible light. The UV beam is scanned so as to maximize the visible light caused by the UV radiation. This enables us to fabricate successfully a chirp-free and high quality fiber Bragg grating.
- 1 November 1996
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 8 (11) , 1495-1497
Fabrication of high-quality long-fiber Bragg grating by monitoring 3.1-eV radiation (400 nm) from GeO defects
3.1-eV (400-nm) luminescence is generated by UV radiation at 244 nm and guided in a germanium-doped silica fiber. In this letter, we propose a new technique for fabricating a fiber Bragg grating by monitoring the power of this visible light. The UV beam is scanned so as to maximize the visible light caused by the UV radiation. This enables us to fabricate successfully a chirp-free and high quality fiber Bragg grating.