Luca Zannetti
Research Subjects
Research Interests
Luca Zannetti has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Haysam Telib
Politecnico di Torino
2 shared publications - Michele Ferlauto
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
2 shared publications A. Elcrat
Wichita State University 1845 N. Fairmount, Wichita, KS 67260-0033, USA
1 shared publication- Alexandre Gourjii
“KPI” National Technical University of Ukraine
1 shared publication - Angelo Iollo
Univ. Bordeaux
1 shared publication - Irene Gned
Politecnico di Torino, DIASP, Italy
1 shared publication
Latest Publications
- 10 July 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1978 (1) , 470034
A new Steklov-Poincaré numerical technique for solving Prandtl-Batchelor flows
The Prandtl-Batchelor flow model is a well-known asymptotic solution of the Navier-Stokes equations often used as a paradigm model of wake past bluff bodies. The main concern is the derivation of vortex equilibria and stability in symmetric and asymmetric configurations. The numerical solution of such class of problems requires an high resolution of the flow in the wake regions and a wide grid to accurately match asymptotic conditions at infinity. In this work a numerical technique based on the Steklov-Poincaré iterative scheme is proposed in order to match the asymptotic conditions and a high resolution on the wake. The case of body endowed with sharp edges is also considered.
- 10 July 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1978 (1) , 470034
A new Steklov-Poincaré numerical technique for solving Prandtl-Batchelor flows
The Prandtl-Batchelor flow model is a well-known asymptotic solution of the Navier-Stokes equations often used as a paradigm model of wake past bluff bodies. The main concern is the derivation of vortex equilibria and stability in symmetric and asymmetric configurations. The numerical solution of such class of problems requires an high resolution of the flow in the wake regions and a wide grid to accurately match asymptotic conditions at infinity. In this work a numerical technique based on the Steklov-Poincaré iterative scheme is proposed in order to match the asymptotic conditions and a high resolution on the wake. The case of body endowed with sharp edges is also considered.
- 16 November 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 809, 705-715
Hollow vortices in shear
An analytical method for determining the shape of hollow vortices in shear flows is presented in detail. In a non-dimensional formulation, it is shown that the problem has one degree of freedom represented by the free choice of the non-dimensionalized speed $\unicode[STIX]{x1D705}$ at the boundary of the vortex. The solutions form two families of shapes corresponding to vortex circulation and shear-flow vorticity having the opposite or same sign. When the signs are opposite, the shape family resembles that described by Llewellyn Smith & Crowdy (J. Fluid Mech., vol. 691, 2012, pp. 178–200) for hollow vortices in a potential flow with strain. As for that flow, there is a minimum value of $\unicode[STIX]{x1D705}$ below which there is no solution as the boundary of the vortex self-intersects, while, when the signs are the same, solutions exist for $0<\unicode[STIX]{x1D705}$ .- 16 November 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 809, 705-715
Hollow vortices in shear
An analytical method for determining the shape of hollow vortices in shear flows is presented in detail. In a non-dimensional formulation, it is shown that the problem has one degree of freedom represented by the free choice of the non-dimensionalized speed $\unicode[STIX]{x1D705}$ at the boundary of the vortex. The solutions form two families of shapes corresponding to vortex circulation and shear-flow vorticity having the opposite or same sign. When the signs are opposite, the shape family resembles that described by Llewellyn Smith & Crowdy (J. Fluid Mech., vol. 691, 2012, pp. 178–200) for hollow vortices in a potential flow with strain. As for that flow, there is a minimum value of $\unicode[STIX]{x1D705}$ below which there is no solution as the boundary of the vortex self-intersects, while, when the signs are the same, solutions exist for $0<\unicode[STIX]{x1D705}$ .- 14 August 2014
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 755, 50-61
Two-vortex equilibrium in the flow past a flat plate at incidence
The two-dimensional inviscid incompressible steady flow past an inclined flat plate is considered. A locus of asymmetric equilibrium configurations for vortex pairs is detected. It is shown that the flat geometry has peculiar properties compared to other geometries: (i) in order to satisfy the Kutta condition at both edges, which ensures flow regularity, the total circulation and the force acting on the plate must be zero; and (ii) the Kutta condition and the free vortex equilibrium conditions are not independent of each other. The non-existence of symmetric equilibrium configurations for an orthogonal plate is extended to more general asymmetric flows.
- 14 August 2014
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 755, 50-61
Two-vortex equilibrium in the flow past a flat plate at incidence
The two-dimensional inviscid incompressible steady flow past an inclined flat plate is considered. A locus of asymmetric equilibrium configurations for vortex pairs is detected. It is shown that the flat geometry has peculiar properties compared to other geometries: (i) in order to satisfy the Kutta condition at both edges, which ensures flow regularity, the total circulation and the force acting on the plate must be zero; and (ii) the Kutta condition and the free vortex equilibrium conditions are not independent of each other. The non-existence of symmetric equilibrium configurations for an orthogonal plate is extended to more general asymmetric flows.
- 14 August 2012
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 708, 377-396
Models for inviscid wakes past a normal plate
Closed and open hollow wakes are considered as analytic models for the two-dimensional inviscid steady flow past a plate normal to the stream. It is shown that only open configurations which satisfy the Kutta condition exist. The main argument is based on considering a plate located on the edge of a step with varying height. It is shown that solutions for open wakes exist for backward-, null and forward-facing steps, while closed wakes only exist for backward-facing steps. The occurrence of secondary separation has been modelled by adding a hollow region attached to the downstream corner. Peculiar accuracy issues of the problem are pointed out which may explain other contradictory results from the literature. It is shown how the Kirchhoff wake is a limiting solution for certain values of the governing parameters.
- 14 August 2012
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 708, 377-396
Models for inviscid wakes past a normal plate
Closed and open hollow wakes are considered as analytic models for the two-dimensional inviscid steady flow past a plate normal to the stream. It is shown that only open configurations which satisfy the Kutta condition exist. The main argument is based on considering a plate located on the edge of a step with varying height. It is shown that solutions for open wakes exist for backward-, null and forward-facing steps, while closed wakes only exist for backward-facing steps. The occurrence of secondary separation has been modelled by adding a hollow region attached to the downstream corner. Peculiar accuracy issues of the problem are pointed out which may explain other contradictory results from the literature. It is shown how the Kirchhoff wake is a limiting solution for certain values of the governing parameters.
- 24 April 2010
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 29 (5) , 369-376
Conformal contour dynamics in bounded domains
- 24 April 2010
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 29 (5) , 369-376
Conformal contour dynamics in bounded domains
- 1 January 2009
- Published by Walter de Gruyter GmbH in Journal of Inverse and Ill-posed Problems
- Vol. 17 (5)
Modeling and optimization of a propeller by means of inverse problems
The aerodynamic optimization problem of turbomachinery blades is addressed by means of an inverse problem and its adjoint equations. The blade geometry is simplified by considering it a thickless flow surface. The shape of the blade leading edge and the load distribution over the blades are the design variables. The flow is modeled by the compressible Euler equations in an axisymmetric framework. A set of discrete adjoint equations are employed to determine the sensitivities of the blade aerodynamic characteristics with respect to the above mentioned design parameters. Finally, the sensitivities are fed to a gradient based algorithm to optimize performance.
- 1 January 2009
- Published by Walter de Gruyter GmbH in Journal of Inverse and Ill-posed Problems
- Vol. 17 (5)
Modeling and optimization of a propeller by means of inverse problems
The aerodynamic optimization problem of turbomachinery blades is addressed by means of an inverse problem and its adjoint equations. The blade geometry is simplified by considering it a thickless flow surface. The shape of the blade leading edge and the load distribution over the blades are the design variables. The flow is modeled by the compressible Euler equations in an axisymmetric framework. A set of discrete adjoint equations are employed to determine the sensitivities of the blade aerodynamic characteristics with respect to the above mentioned design parameters. Finally, the sensitivities are fed to a gradient based algorithm to optimize performance.
- 30 June 2005
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 24 (3) , 328-337
Vortex pair and Chaplygin cusps
- 30 June 2005
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 24 (3) , 328-337
Vortex pair and Chaplygin cusps