Subhajit Biswas

A L-cysteine assisted hydrothermal route has been utilized for the growth of Ag2S nanostructures with chainlike network. It was observed that the experimental parameters such as the synthesis temperature and variation in the molar ratio of the anionic and cationic precursors play critical role in determining the morphology and crystal structure of the products. X-ray diffraction study revealed the formation of monoclinic acanthite Ag2S. L-cysteine was acting as complexing agent as well as sulfur source. The branching fractal morphology was explained through Cayley tree model and structure of L-cysteine.

The primary focus of this work is to elucidate the location and extent of exfoliation of clay on fracture (under both static and dynamic loading conditions) of melt-compounded nylon 66/clay/SEBS-g-MA ternary nanocomposites fabricated by different blending sequences. Distinct microstructures are obtained depending on the blending protocol employed. The state of exfoliation and dispersion of clay in nylon 66 matrix and SEBS-g-MA phase are quantified and the presence of clay in rubber is shown to have a negative effect on the toughness of the nanocomposites. The level of toughness enhancement of ternary nanocomposites depends on the blending protocol and the capability of different fillers to activate the plastic deformation mechanisms in the matrix. These mechanisms include: cavitation of SEBS-g-MA phase, stretching of voided matrix material, interfacial debonding of SEBS-g-MA particles, debonding of intercalated clay embedded inside the SEBS-g-MA phase, and delamination of intercalated clay platelets. Based on these results, new insights and approaches for the processing of better toughened polymer ternary nanocomposites are discussed.

Nanostructures of ZnS, both particles and rods, were synthesized through solvothermal processes and characterized by x-ray diffraction and high resolution transmission electron microscopy. Positron lifetime and Doppler broadening measurements were made to study the features related to the defect nanostructures present in the samples. The nanocrystalline grain surfaces and interfaces, which trapped significant fractions of positrons, gradually disappeared during grain growth, as indicated by the decreasing fraction of orthopositronium atoms. The crystal vacancies present within the grains also trapped positrons. These vacancies further agglomerated into clusters during the thermal treatment given to effect grain growth. The positron lifetime was remarkably large at extremely small grain sizes (∼1.5nm) and this was attributed to the occurrence of quantum confinement effects, as verified through optical absorption measurements. Positron lifetimes in ZnS nanorods increased with increasing content of cubic phase in the samples and this observation is assigned to the annihilation of positrons in sites with increased cubic unit cell volume. The Doppler broadened spectra also indicated qualitative changes consistent with these observations.