Paolo Coppa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paolo Coppa has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Sandra Corasaniti
Department of Industrial Engineering, University of Rome Tor Vergata, 00133 Rome, Italy
9 shared publications - Gianluigi Bovesecchi
Department of Enterprise Engineering, University of Rome Tor Vergata, 00133 Rome, Italy
7 shared publications - Ateeq Ur Rehman
Department of Industrial Engineering, University of Rome Tor Vergata, 00133 Rome, Italy
4 shared publications - Dario Atzori
Department of Industrial Engineering, University of Rome Tor Vergata, 00133 Rome, Italy
4 shared publications - Michele Potenza
Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome 00133, Italy
3 shared publications - Girolamo Costanza
University of Rome Tor Vergata
2 shared publications
Latest Publications
- Open Access
Algorithm-Driven Demand Optimization as an Enabler of Industrial Prosumers in Renewable Energy Communities: A Techno-Economic Assessment of a Flat Glass Processing SME
This study addresses the multi-objective optimization of characterizing a flat glass processing plant. To assess the operational conditions required for a flat glass processing small and medium-sized enterprise (SME) to become a prosumer compatible with renewable energy community (REC) participation. This work is motivated by the presence of more than 300 SMEs in Italy, like this, where RECs represent one of the few viable strategies for achieving the European Union’s 2050 decarbonization targets. The research is carried out in two scenarios; Scenario-I includes Stage-i and Stage-ii with the mutual goal of forecasting and optimizing. Forecasting is used in Stage-i to optimize the factory load, and in Stage-ii to shift and curtail energy loads based on the forecast, considering the Italian national energy price and the regional price bands (“fasce orarie”) F1, F2, and F3. Forecasting and the indicators of environmental and social performance are the means to ensure the best energy utilization and management, as they prove that the reduction in CO2 emissions and benefits on the community level can be both obtainable. Subsequently, the techno-economic analysis and evaluation of prosumer-readiness conditions are carried out through the optimization of industrial energy demand: three optimization objectives are assessed in this study (i) energy cost, (ii) carbon emission, and (iii) load curtailment. Four algorithms are put into effect to solve the tri-objective optimization: multi-objective particle swarm optimization (MOPSO), multi-objective ant nesting algorithm (MOANA), non-dominated sorting genetic algorithm (NSGA-II), and multi-objective grey wolf optimization (MOGWO). The algorithms are validated in Stage-ii to find the desired optimum in the cost of energy, reduce peak formation, and carbon emissions. To achieve this goal, a stochastic approach based on Monte Carlo simulations and VIKOR is used to optimally select the results. The findings show that the NSGA-II, MOPSO, and MOANA are more effective in solving the problem, while the MOGWO algorithm more quickly finds the optimal solution. Based on the defined objectives, a new configuration for the energy community is introduced, together with a community well-being index and an evaluation of the resulting benefits for the factory. In Scenario-II, the PV plants’ installation on the factory is sized, and the excess energy shared with the grid is evaluated. The Scenario-II results show that 497.184 MWh (33.9%) of energy is shared with the grid. Both results suggest how optimized industrial demand profiles improve SME participation in future RECs.
Open AccessAlgorithm-Driven Demand Optimization as an Enabler of Industrial Prosumers in Renewable Energy Communities: A Techno-Economic Assessment of a Flat Glass Processing SME
This study addresses the multi-objective optimization of characterizing a flat glass processing plant. To assess the operational conditions required for a flat glass processing small and medium-sized enterprise (SME) to become a prosumer compatible with renewable energy community (REC) participation. This work is motivated by the presence of more than 300 SMEs in Italy, like this, where RECs represent one of the few viable strategies for achieving the European Union’s 2050 decarbonization targets. The research is carried out in two scenarios; Scenario-I includes Stage-i and Stage-ii with the mutual goal of forecasting and optimizing. Forecasting is used in Stage-i to optimize the factory load, and in Stage-ii to shift and curtail energy loads based on the forecast, considering the Italian national energy price and the regional price bands (“fasce orarie”) F1, F2, and F3. Forecasting and the indicators of environmental and social performance are the means to ensure the best energy utilization and management, as they prove that the reduction in CO2 emissions and benefits on the community level can be both obtainable. Subsequently, the techno-economic analysis and evaluation of prosumer-readiness conditions are carried out through the optimization of industrial energy demand: three optimization objectives are assessed in this study (i) energy cost, (ii) carbon emission, and (iii) load curtailment. Four algorithms are put into effect to solve the tri-objective optimization: multi-objective particle swarm optimization (MOPSO), multi-objective ant nesting algorithm (MOANA), non-dominated sorting genetic algorithm (NSGA-II), and multi-objective grey wolf optimization (MOGWO). The algorithms are validated in Stage-ii to find the desired optimum in the cost of energy, reduce peak formation, and carbon emissions. To achieve this goal, a stochastic approach based on Monte Carlo simulations and VIKOR is used to optimally select the results. The findings show that the NSGA-II, MOPSO, and MOANA are more effective in solving the problem, while the MOGWO algorithm more quickly finds the optimal solution. Based on the defined objectives, a new configuration for the energy community is introduced, together with a community well-being index and an evaluation of the resulting benefits for the factory. In Scenario-II, the PV plants’ installation on the factory is sized, and the excess energy shared with the grid is evaluated. The Scenario-II results show that 497.184 MWh (33.9%) of energy is shared with the grid. Both results suggest how optimized industrial demand profiles improve SME participation in future RECs.
- 21 March 2026
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 47 (4) , 66
Numerical and Machine Learning Methods to Predict the Thermal Behaviour of New Photovoltaic Cells in Order to Increase Their Efficiency
- 21 March 2026
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 47 (4) , 66
Numerical and Machine Learning Methods to Predict the Thermal Behaviour of New Photovoltaic Cells in Order to Increase Their Efficiency
- Open Access
- 3 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (3) , 1541
Thermal Conductivity and Convection Heat Transfer Coefficient of Aluminum Cellular Structures Filled with Water and Air
The present study investigates the thermal conductivity (λ) and convective heat transfer coefficient (h) of AA 6082 aluminum cellular structures immersed in water and air using a thermal conductivity probe (TCP) manufactured by the authors. The probe is a cylindrical needle 0.6 mm in diameter (D) and 60 mm in length (L), obtaining an L/D ratio = 100 ratio, which satisfies the infinite line-source assumption and enables discrimination between pure-fluid and composite (fluid + solid) thermal behavior. Cellular samples are manufactured with the Lost-PLA process and tested at temperatures of 5, 20, and 40 °C, feeding the TCP with different currents, under controlled heating conditions. The results show that the presence of the aluminum cellular structure enhances heat transfer compared with that of pure fluids. In air, the effective thermal conductivity is higher by approximately 37–45% than that in pure air, reaching about 0.038 W m−1 K−1 at higher temperatures. In water, λ increases from approximately 0.8 to 1.2 W m−1 K−1 over the investigated temperature range, corresponding to an enhancement of about 45–80% compared with that of pure water. Similarly, the convective heat transfer coefficient is higher by about 22–32% in air (h ≈ 38–41 W m−2 K−1) and 19–54% in water (up to ~440 W m−2 K−1), depending on temperature. These results indicate that the high thermal conductivity of the aluminum skeleton mainly improves conduction (“thermal bridging”), while convection may be locally affected within the pores. This study confirms the capability of the TCP method to discriminate between fluid and composite heat transfer contributions and highlights the potential of additively manufactured aluminum cellular structures for lightweight thermal management applications.
- 3 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (3) , 1541
Open AccessThermal Conductivity and Convection Heat Transfer Coefficient of Aluminum Cellular Structures Filled with Water and Air
The present study investigates the thermal conductivity (λ) and convective heat transfer coefficient (h) of AA 6082 aluminum cellular structures immersed in water and air using a thermal conductivity probe (TCP) manufactured by the authors. The probe is a cylindrical needle 0.6 mm in diameter (D) and 60 mm in length (L), obtaining an L/D ratio = 100 ratio, which satisfies the infinite line-source assumption and enables discrimination between pure-fluid and composite (fluid + solid) thermal behavior. Cellular samples are manufactured with the Lost-PLA process and tested at temperatures of 5, 20, and 40 °C, feeding the TCP with different currents, under controlled heating conditions. The results show that the presence of the aluminum cellular structure enhances heat transfer compared with that of pure fluids. In air, the effective thermal conductivity is higher by approximately 37–45% than that in pure air, reaching about 0.038 W m−1 K−1 at higher temperatures. In water, λ increases from approximately 0.8 to 1.2 W m−1 K−1 over the investigated temperature range, corresponding to an enhancement of about 45–80% compared with that of pure water. Similarly, the convective heat transfer coefficient is higher by about 22–32% in air (h ≈ 38–41 W m−2 K−1) and 19–54% in water (up to ~440 W m−2 K−1), depending on temperature. These results indicate that the high thermal conductivity of the aluminum skeleton mainly improves conduction (“thermal bridging”), while convection may be locally affected within the pores. This study confirms the capability of the TCP method to discriminate between fluid and composite heat transfer contributions and highlights the potential of additively manufactured aluminum cellular structures for lightweight thermal management applications.
- Open Access
Smart Grids and Renewable Energy Communities in Pakistan and the Middle East: Present Situation, Perspectives, Future Developments, and Comparison with EU
The shift towards the integration of and transition to renewable energy has led to an increase in renewable energy communities (RECs) and smart grids (SGs). The significance of these RECs is mainly energy self-sufficiency, energy independence, and energy autonomy. Despite this, in low- and middle-income countries and regions like Pakistan and the Middle East, SGs and RECs are still in their initial stage. However, they have potential for green energy solutions rooted in their unique geographic and climatic conditions. SGs offer energy monitoring, communication infrastructure, and automation features to help these communities build flexible and efficient energy systems. This work provides an overview of Pakistani and Middle Eastern energy policies, goals, and initiatives while aligning with European comparisons. This work also highlights technical, regulatory, and economic challenges in those regions. The main objectives of the research are to ensure that residential service sizes are optimized to maximize the economic and environmental benefits of green energy. Furthermore, in line with SDG 7, affordable and clean energy, the focus in this study is on the development and transformation of energy systems for sustainability and creating synergies with other SDGs. The paper presents insights on the European Directive, including the amended Renewable Energy Directive (RED II and III), to recommend policy enhancements and regulatory changes that could strengthen the growth of RECs in Asian countries, Pakistan, and the Middle East, paving the way for a more inclusive and sustainable energy future. Additionally, it addresses the main causes that hinder the expansion of RECs and SGs, and offers strategic recommendations to support their development in order to reduce dependency on national electric grids. To perform this, a perspective study of Pakistan’s indicative generation capacity by 2031, along with comparisons of energy capacity in the EU, the Middle East, and Asia, is presented. Pakistan’s solar, wind, and hydro potential is also explored in detail. This study is a baseline and informative resource for policy makers, researchers, industry stakeholders, and energy communities’ promoters, who are committed to the task of promoting sustainable renewable energy solutions.
Open AccessSmart Grids and Renewable Energy Communities in Pakistan and the Middle East: Present Situation, Perspectives, Future Developments, and Comparison with EU
The shift towards the integration of and transition to renewable energy has led to an increase in renewable energy communities (RECs) and smart grids (SGs). The significance of these RECs is mainly energy self-sufficiency, energy independence, and energy autonomy. Despite this, in low- and middle-income countries and regions like Pakistan and the Middle East, SGs and RECs are still in their initial stage. However, they have potential for green energy solutions rooted in their unique geographic and climatic conditions. SGs offer energy monitoring, communication infrastructure, and automation features to help these communities build flexible and efficient energy systems. This work provides an overview of Pakistani and Middle Eastern energy policies, goals, and initiatives while aligning with European comparisons. This work also highlights technical, regulatory, and economic challenges in those regions. The main objectives of the research are to ensure that residential service sizes are optimized to maximize the economic and environmental benefits of green energy. Furthermore, in line with SDG 7, affordable and clean energy, the focus in this study is on the development and transformation of energy systems for sustainability and creating synergies with other SDGs. The paper presents insights on the European Directive, including the amended Renewable Energy Directive (RED II and III), to recommend policy enhancements and regulatory changes that could strengthen the growth of RECs in Asian countries, Pakistan, and the Middle East, paving the way for a more inclusive and sustainable energy future. Additionally, it addresses the main causes that hinder the expansion of RECs and SGs, and offers strategic recommendations to support their development in order to reduce dependency on national electric grids. To perform this, a perspective study of Pakistan’s indicative generation capacity by 2031, along with comparisons of energy capacity in the EU, the Middle East, and Asia, is presented. Pakistan’s solar, wind, and hydro potential is also explored in detail. This study is a baseline and informative resource for policy makers, researchers, industry stakeholders, and energy communities’ promoters, who are committed to the task of promoting sustainable renewable energy solutions.
- Open Access
Renewable Energy Communities (RECs): European and Worldwide Distribution, Different Technologies, Management, and Modeling
Renewable energy communities (RECs) are increasingly recognized as pivotal instruments in the global energy transition, offering decentralized, participatory, and sustainable solutions for energy management, specifically regarding energy production and consumption. The present review provides a comprehensive examination of the REC concept, tracing its regulatory evolution, particularly within the European Union through the renewable energy directives (RED II and RED III) and by analyzing its practical implementation across various countries. This paper explores the diverse technologies integrated into REC projects, such as photovoltaic systems, wind turbines, biogas, hydroelectric, and storage solutions, while also considering the socioeconomic frameworks, management models, and local engagement strategies that underpin their success. Key case studies from Europe, Asia, Africa, and Australia illustrate the various approaches, challenges, and outcomes of REC initiatives in different geographic and policy contexts. The analysis also highlights barriers to implementing RECs, including regulatory uncertainty and market integration issues, and identifies the best practices and policies that support REC scalability. By synthesizing current trends and lessons learned, this review aims to inform policymakers, researchers, and practitioners about the transformative role of RECs in achieving decarbonization goals and accomplishing resilient energy systems.
Open AccessRenewable Energy Communities (RECs): European and Worldwide Distribution, Different Technologies, Management, and Modeling
Renewable energy communities (RECs) are increasingly recognized as pivotal instruments in the global energy transition, offering decentralized, participatory, and sustainable solutions for energy management, specifically regarding energy production and consumption. The present review provides a comprehensive examination of the REC concept, tracing its regulatory evolution, particularly within the European Union through the renewable energy directives (RED II and RED III) and by analyzing its practical implementation across various countries. This paper explores the diverse technologies integrated into REC projects, such as photovoltaic systems, wind turbines, biogas, hydroelectric, and storage solutions, while also considering the socioeconomic frameworks, management models, and local engagement strategies that underpin their success. Key case studies from Europe, Asia, Africa, and Australia illustrate the various approaches, challenges, and outcomes of REC initiatives in different geographic and policy contexts. The analysis also highlights barriers to implementing RECs, including regulatory uncertainty and market integration issues, and identifies the best practices and policies that support REC scalability. By synthesizing current trends and lessons learned, this review aims to inform policymakers, researchers, and practitioners about the transformative role of RECs in achieving decarbonization goals and accomplishing resilient energy systems.
- Open Access
Experimental Tests of Conduction/Convection Heat Transfer in Very High Porosity Foams with Lattice Structures, Immersed in Different Fluids
This experimental work presents the results of measurements of thermal conductivity λ and convection heat transfer coefficient h on regular structure PLA and aluminium foams with low density ratio (~0.15), carried out with a TCP (thermal conductivity probe), built by the authors’ laboratory. Measurements were performed with two fluids, water and air: pure fluids, and samples with the PLA and aluminium foams immersed in both fluids have been tested. Four temperatures (10, 20, 30, 40 °C) and various temperature differences during the tests ΔT (between 0.35 and 9 °C) were applied. Also, tests in water mixed with 0.5% of a gel (agar agar) have been run in order to increase the water viscosity and to avoid convection starting. For these tests, at the end of the heating, the temperature of the probe reaches steady-state values, when all the thermal power supplied by the probe is transferred to the cooled cell wall; thermal conductivity was also evaluated through the guarded hot ring (GHR) method. A difference was found between the results of λ in steady-state and transient regimes, likely due to the difference of the sample volume interested by heating during the tests. Also, the effect of the temperature difference ΔT on the behaviour of the pure fluid and foams was outlined. The mutual effect of thermal conductivity and free convection heat transfer results in being extremely important to describe the behaviour of such kinds of composites when they are used to increase or to reduce the heat transfer, as heat conductors or insulators. Very few works are present in the literature about this subject, above all, ones regarding low-density regular structures.
Open AccessExperimental Tests of Conduction/Convection Heat Transfer in Very High Porosity Foams with Lattice Structures, Immersed in Different Fluids
This experimental work presents the results of measurements of thermal conductivity λ and convection heat transfer coefficient h on regular structure PLA and aluminium foams with low density ratio (~0.15), carried out with a TCP (thermal conductivity probe), built by the authors’ laboratory. Measurements were performed with two fluids, water and air: pure fluids, and samples with the PLA and aluminium foams immersed in both fluids have been tested. Four temperatures (10, 20, 30, 40 °C) and various temperature differences during the tests ΔT (between 0.35 and 9 °C) were applied. Also, tests in water mixed with 0.5% of a gel (agar agar) have been run in order to increase the water viscosity and to avoid convection starting. For these tests, at the end of the heating, the temperature of the probe reaches steady-state values, when all the thermal power supplied by the probe is transferred to the cooled cell wall; thermal conductivity was also evaluated through the guarded hot ring (GHR) method. A difference was found between the results of λ in steady-state and transient regimes, likely due to the difference of the sample volume interested by heating during the tests. Also, the effect of the temperature difference ΔT on the behaviour of the pure fluid and foams was outlined. The mutual effect of thermal conductivity and free convection heat transfer results in being extremely important to describe the behaviour of such kinds of composites when they are used to increase or to reduce the heat transfer, as heat conductors or insulators. Very few works are present in the literature about this subject, above all, ones regarding low-density regular structures.
- 12 January 2023
- Published by ASME International in ASME Journal of Heat and Mass Transfer
- Vol. 145 (6) , 1-31
Probes for Contemporary Measurement of Thermal Conductivity, Thermal Diffusivity, and Convection Heat Transfer
Four probes for measuring thermal conductivity, thermal diffusivity, and convection heat transfer coefficient were designed, built, and tested. In two of these probes (SP-1 and SP-2), three thermocouples were placed at 25%, 50%, and 75% of the total length of 150 mm, while the third probe (SP-3) has the three thermocouples at 10%, 50%, and 90%. The fourth probe (DP-1) is a dual-probe, to measure thermal diffusivity using the pulse method. First results show good performance of the devices when measuring a reference material (glycerol). In fact, an accuracy of about ±5% was achieved in both thermal conductivity and thermal diffusivity measurements. The size of the probes (length 150 mm, diameter 2 mm) makes them particularly suitable for measuring the thermophysical properties of bulk materials, such as soils, composites, buildings walls, etc. Thanks to the presence of three thermocouples, convection can be studied so that also the boundary layer can also be evaluated.
- 12 January 2023
- Published by ASME International in ASME Journal of Heat and Mass Transfer
- Vol. 145 (6) , 1-31
Probes for Contemporary Measurement of Thermal Conductivity, Thermal Diffusivity, and Convection Heat Transfer
Four probes for measuring thermal conductivity, thermal diffusivity, and convection heat transfer coefficient were designed, built, and tested. In two of these probes (SP-1 and SP-2), three thermocouples were placed at 25%, 50%, and 75% of the total length of 150 mm, while the third probe (SP-3) has the three thermocouples at 10%, 50%, and 90%. The fourth probe (DP-1) is a dual-probe, to measure thermal diffusivity using the pulse method. First results show good performance of the devices when measuring a reference material (glycerol). In fact, an accuracy of about ±5% was achieved in both thermal conductivity and thermal diffusivity measurements. The size of the probes (length 150 mm, diameter 2 mm) makes them particularly suitable for measuring the thermophysical properties of bulk materials, such as soils, composites, buildings walls, etc. Thanks to the presence of three thermocouples, convection can be studied so that also the boundary layer can also be evaluated.
- Open Access
Modeling and Measuring Thermodynamic and Transport Thermophysical Properties: A Review
The present review describes the up-to-date state of the evaluation of thermophysical properties (TP) of materials with three different procedures: modeling (also including inverse problems), measurements and analytical methods (e.g., through computing from other properties). Methods to measure specific heat and thermal conductivity are described in detail. Thermal diffusivity and thermal effusivity are a combination of the previously cited properties, but also for these properties, specific measurement and calculation methods are reported. Experiments can be carried out in steady-state, transient, and pulse regimes. For modeling, special focus is given to the inverse methods and parameter estimation procedures, because through them it is possible to evaluate the thermophysical property, assuring the best practices and supplying the measurement uncertainty. It is also cited when the most common data processing algorithms are used, e.g., the Gauss–Newton and Levenberg–Marquardt least squares minimization algorithms, and how it is possible to retrieve values of TP from other data. Optimization criteria for designing the experiments are also mentioned.
Open AccessModeling and Measuring Thermodynamic and Transport Thermophysical Properties: A Review
The present review describes the up-to-date state of the evaluation of thermophysical properties (TP) of materials with three different procedures: modeling (also including inverse problems), measurements and analytical methods (e.g., through computing from other properties). Methods to measure specific heat and thermal conductivity are described in detail. Thermal diffusivity and thermal effusivity are a combination of the previously cited properties, but also for these properties, specific measurement and calculation methods are reported. Experiments can be carried out in steady-state, transient, and pulse regimes. For modeling, special focus is given to the inverse methods and parameter estimation procedures, because through them it is possible to evaluate the thermophysical property, assuring the best practices and supplying the measurement uncertainty. It is also cited when the most common data processing algorithms are used, e.g., the Gauss–Newton and Levenberg–Marquardt least squares minimization algorithms, and how it is possible to retrieve values of TP from other data. Optimization criteria for designing the experiments are also mentioned.
- 11 April 2021
- Published by Wiley in European Journal of Soil Science
- Vol. 72 (5) , 1940-1953
Soil thermal conductivity model by de Vries: Re‐examination and validation analysis
The thermal conductivity ( λ ) of soils is an important property in a variety of science and engineering applications. One of the most widely used λ models in soil science was proposed by de Vries ( deV‐0) . This model is complicated and difficult to use as it is based on several controversial assumptions. The deV‐0 assumes that a soil system is composed of non‐contacting solid particles (rotated uniform ellipsoids) that are dispersed in a continuous homogeneous medium (air or water). Furthermore, deV‐0 assumes that soil solids consist of quartz and consolidated bulk minerals. These assumptions do not reflect the true nature of soils that are composed of several compacted minerals, diverse in shape and notably different in size. A critical analysis of this model concluded that its most controversial feature was inherited from an electrical conductivity model for a two‐phase dispersion system; specifically, from weighting shape factors of non‐contacting rotated oblate ellipsoids. Furthermore, deV‐0 has not yet been fully examined and verified with respect to a comprehensive and complete soil λ database. Also, there is a lack of comparable models to deV‐0 that would contain a complete set of clearly described and linked expressions. Consequently, two slightly adjusted versions of deV‐0 were developed; namely, deV‐1 with soil bulk mineralogy (quartz plus integrated residual minerals) and deV‐2 with complete soil mineralogy (i.e., including individual contributions from all soil minerals). Both models underwent successful calibration and verification against λ data of 39 Canadian field soils and three Standard sands. Markedly improved estimates ( λ est ) were obtained when, instead of dry air thermal conductivity ( λ a ), an apparent air thermal conductivity ( λ a‐app = λ a + λ v ) was applied ( λ v represents thermal effects caused by migration of water vapour and evaporation/condensation processes). For deV‐1 , the following reduction of standard deviation ( SD ) data was obtained: 53.5% for 17 coarse soils, 34% for 22 fine soils, and 44.5% for all 39 soils. Then, the same calibration factors of deV‐1 were applied to the deV‐2 model and a similar reduction of SD data was obtained (52.7, 24.1 and 40.1%, respectively). Generally, for 39 Canadian field soils, both models ( deV‐1 and deV‐2 ), with quartz thermal conductivity ( λ qtz ) of 7.6 W·m −1 ·K −1 , produced very close λ estimates ( SD ≈ 0.099 and 0.094 W·m −1 ·K −1 , respectively). Taking into account the simplicity of mineral composition and fewer calibration coefficients, deV‐1 was a preferable choice. For that reason, soil bulk mineralogy appears to be a good equivalent to complete soil mineralogy. Also, for Standard sands (100% sand: C‐109, C‐190, NS‐04), improved λ est were obtained by replacing λ a with λ a‐app . Finally, the deV‐1 model was successfully applied to 10 Chinese soils and the following average SD values were obtained: for four coarse soils 0.135 W·m −1 ·K −1 , whereas for six fine soils 0.127 W·m −1 ·K −1 . Highlights: The original λ model by de Vries ( deV‐0 ) underestimates experimental λ data. Two modified deV‐0 versions were developed: deV‐1 , quartz + bulk minerals; deV‐2 , all soil minerals. Improved estimates were obtained when, instead of dry air λ , an apparent air λ was applied. The deV‐1 model was successfully applied to 10 Chinese soils.
- 11 April 2021
- Published by Wiley in European Journal of Soil Science
- Vol. 72 (5) , 1940-1953
Soil thermal conductivity model by de Vries: Re‐examination and validation analysis
The thermal conductivity ( λ ) of soils is an important property in a variety of science and engineering applications. One of the most widely used λ models in soil science was proposed by de Vries ( deV‐0) . This model is complicated and difficult to use as it is based on several controversial assumptions. The deV‐0 assumes that a soil system is composed of non‐contacting solid particles (rotated uniform ellipsoids) that are dispersed in a continuous homogeneous medium (air or water). Furthermore, deV‐0 assumes that soil solids consist of quartz and consolidated bulk minerals. These assumptions do not reflect the true nature of soils that are composed of several compacted minerals, diverse in shape and notably different in size. A critical analysis of this model concluded that its most controversial feature was inherited from an electrical conductivity model for a two‐phase dispersion system; specifically, from weighting shape factors of non‐contacting rotated oblate ellipsoids. Furthermore, deV‐0 has not yet been fully examined and verified with respect to a comprehensive and complete soil λ database. Also, there is a lack of comparable models to deV‐0 that would contain a complete set of clearly described and linked expressions. Consequently, two slightly adjusted versions of deV‐0 were developed; namely, deV‐1 with soil bulk mineralogy (quartz plus integrated residual minerals) and deV‐2 with complete soil mineralogy (i.e., including individual contributions from all soil minerals). Both models underwent successful calibration and verification against λ data of 39 Canadian field soils and three Standard sands. Markedly improved estimates ( λ est ) were obtained when, instead of dry air thermal conductivity ( λ a ), an apparent air thermal conductivity ( λ a‐app = λ a + λ v ) was applied ( λ v represents thermal effects caused by migration of water vapour and evaporation/condensation processes). For deV‐1 , the following reduction of standard deviation ( SD ) data was obtained: 53.5% for 17 coarse soils, 34% for 22 fine soils, and 44.5% for all 39 soils. Then, the same calibration factors of deV‐1 were applied to the deV‐2 model and a similar reduction of SD data was obtained (52.7, 24.1 and 40.1%, respectively). Generally, for 39 Canadian field soils, both models ( deV‐1 and deV‐2 ), with quartz thermal conductivity ( λ qtz ) of 7.6 W·m −1 ·K −1 , produced very close λ estimates ( SD ≈ 0.099 and 0.094 W·m −1 ·K −1 , respectively). Taking into account the simplicity of mineral composition and fewer calibration coefficients, deV‐1 was a preferable choice. For that reason, soil bulk mineralogy appears to be a good equivalent to complete soil mineralogy. Also, for Standard sands (100% sand: C‐109, C‐190, NS‐04), improved λ est were obtained by replacing λ a with λ a‐app . Finally, the deV‐1 model was successfully applied to 10 Chinese soils and the following average SD values were obtained: for four coarse soils 0.135 W·m −1 ·K −1 , whereas for six fine soils 0.127 W·m −1 ·K −1 . Highlights: The original λ model by de Vries ( deV‐0 ) underestimates experimental λ data. Two modified deV‐0 versions were developed: deV‐1 , quartz + bulk minerals; deV‐2 , all soil minerals. Improved estimates were obtained when, instead of dry air λ , an apparent air λ was applied. The deV‐1 model was successfully applied to 10 Chinese soils.
- 19 November 2020
- Published by Wiley in Journal of Heat Transfer
- Vol. 143 (2)
Thermal Behavior of Teeth During Restoration Procedure With Composite: Experimental Tests and Numerical Simulation
Different thermal mechanisms influence the tooth temperature during the reconstruction practice of tooth restoration: conduction in the hard tissues and their thermal capacitance, heat generation by composite curing, irradiation of the surface from the LED lamp, convection, and conduction to the environment. All these phenomena were considered into a numerical (finite difference, FD) model to simulate the temperature trend in a tooth during reconstruction with a resin composite addition, and results compared with experiments on cylindrical sample with a cavity filled with resin. Results demonstrate that all the phenomena have been sufficiently accurately described, and the way to apply the model to real teeth is recognized.
- 19 November 2020
- Published by Wiley in Journal of Heat Transfer
- Vol. 143 (2)
Thermal Behavior of Teeth During Restoration Procedure With Composite: Experimental Tests and Numerical Simulation
Different thermal mechanisms influence the tooth temperature during the reconstruction practice of tooth restoration: conduction in the hard tissues and their thermal capacitance, heat generation by composite curing, irradiation of the surface from the LED lamp, convection, and conduction to the environment. All these phenomena were considered into a numerical (finite difference, FD) model to simulate the temperature trend in a tooth during reconstruction with a resin composite addition, and results compared with experiments on cylindrical sample with a cavity filled with resin. Results demonstrate that all the phenomena have been sufficiently accurately described, and the way to apply the model to real teeth is recognized.