M. Razeghi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
M. Razeghi has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
J. Diaz
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
9 shared publicationsB. Lane
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
6 shared publicationsD. Wu
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
5 shared publicationsH. Yi
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
5 shared publicationsA. Rybaltowski
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
4 shared publicationsI. Eliashevich
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208
3 shared publications
Latest Publications
- 1 May 2000
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 74 (1-3) , 107-112
Lateral epitaxial overgrowth of GaN on sapphire and silicon substrates for ultraviolet photodetector applications
- 1 May 2000
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 74 (1-3) , 107-112
Lateral epitaxial overgrowth of GaN on sapphire and silicon substrates for ultraviolet photodetector applications
- 3 August 1999
- Published by Elsevier in Microelectronics Journal
- Vol. 30 (10) , 1019-1029
Kinetics of quantum states in quantum cascade lasers: device design principles and fabrication
- 3 August 1999
- Published by Elsevier in Microelectronics Journal
- Vol. 30 (10) , 1019-1029
Kinetics of quantum states in quantum cascade lasers: device design principles and fabrication
- 26 May 1999
- Published by AIP Publishing in Applied Physics Letters
- Vol. 74 (23) , 3438-3440
InAsSb/InAsP strained-layer superlattice injection lasers operating at 4.0 μm grown by metal-organic chemical vapor deposition
We report high power mid-infrared electrical injection operation of laser diodes based on InAsSb/InAsP strained-layer superlattices grown on InAs substrate by metal-organic chemical vapor deposition. The broad-area laser diodes with 100 μm aperture and 1800 μm cavity length demonstrate peak output powers of 546 and 94 mW in pulsed and cw operation respectively at 100 K with a threshold current density as low as 100 A/cm2.
- 26 May 1999
- Published by AIP Publishing in Applied Physics Letters
- Vol. 74 (23) , 3438-3440
InAsSb/InAsP strained-layer superlattice injection lasers operating at 4.0 μm grown by metal-organic chemical vapor deposition
We report high power mid-infrared electrical injection operation of laser diodes based on InAsSb/InAsP strained-layer superlattices grown on InAs substrate by metal-organic chemical vapor deposition. The broad-area laser diodes with 100 μm aperture and 1800 μm cavity length demonstrate peak output powers of 546 and 94 mW in pulsed and cw operation respectively at 100 K with a threshold current density as low as 100 A/cm2.
- 23 February 1999
- Published by AIP Publishing in Applied Physics Letters
- Vol. 74 (9) , 1194-1196
High power asymmetrical InAsSb/InAsSbP/AlAsSb double heterostructure lasers emitting at 3.4 μm
Midinfrared lasers with an asymmetrical InPAsSb/InAsSb/AlAsSb double heterostructure are reported. Using the asymmetrical double heterostructure, p- and n-cladding layers are separately optimized; high energy-gap AlAsSb eV) for the p-type cladding layer to reduce the leakage current, and thus to increase and low energy-gap InPAsSb eV) for the n-cladding layer to have low turn-on voltage. 100-μm-width broad-area lasers with 1000 μm cavity length exhibited peak output powers of 1.88 W in pulse and 350 mW in continuous wave modes per two facets at T=80 K with of 54 K and turn-on voltage of 0.36 V. Maximum peak output powers up to 6.7 W were obtained from a laser bar of total aperture of 400 μm width and cavity length of 1000 μm, with a differential efficiency of 34% and far-field beam divergence narrower than 40° at 80 K.- 23 February 1999
- Published by AIP Publishing in Applied Physics Letters
- Vol. 74 (9) , 1194-1196
High power asymmetrical InAsSb/InAsSbP/AlAsSb double heterostructure lasers emitting at 3.4 μm
Midinfrared lasers with an asymmetrical InPAsSb/InAsSb/AlAsSb double heterostructure are reported. Using the asymmetrical double heterostructure, p- and n-cladding layers are separately optimized; high energy-gap AlAsSb eV) for the p-type cladding layer to reduce the leakage current, and thus to increase and low energy-gap InPAsSb eV) for the n-cladding layer to have low turn-on voltage. 100-μm-width broad-area lasers with 1000 μm cavity length exhibited peak output powers of 1.88 W in pulse and 350 mW in continuous wave modes per two facets at T=80 K with of 54 K and turn-on voltage of 0.36 V. Maximum peak output powers up to 6.7 W were obtained from a laser bar of total aperture of 400 μm width and cavity length of 1000 μm, with a differential efficiency of 34% and far-field beam divergence narrower than 40° at 80 K.- 27 October 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 71 (17) , 2430-2432
High power InAsSb/InPAsSb/InAs mid-infrared lasers
We demonstrate high-power InAsSb/InPAsSb laser bars consisting of three 100-μm-wide laser stripes of 700 μm cavity length, with peak output power up to 3 W at 90 K, and far-fields for the direction perpendicular to the junction as narrow as 12° full width half maximum. Spectra and far-field patterns of the laser bars are shown to have excellent characteristics for a wide range of operating conditions, suggesting the possibility of even higher light power emission with good beam quality. Joule heating is shown to be the major factor limiting higher power operation.- 27 October 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 71 (17) , 2430-2432
High power InAsSb/InPAsSb/InAs mid-infrared lasers
We demonstrate high-power InAsSb/InPAsSb laser bars consisting of three 100-μm-wide laser stripes of 700 μm cavity length, with peak output power up to 3 W at 90 K, and far-fields for the direction perpendicular to the junction as narrow as 12° full width half maximum. Spectra and far-field patterns of the laser bars are shown to have excellent characteristics for a wide range of operating conditions, suggesting the possibility of even higher light power emission with good beam quality. Joule heating is shown to be the major factor limiting higher power operation.- 1 February 1997
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 9 (2) , 173-175
InAsSbP-InAsSb-InAs diode lasers emitting at 3.2 /spl mu/m grown by metal-organic chemical vapor deposition
InAsSb-InAsSbP double heterostructure diode lasers have been grown by metal-organic chemical vapor deposition on (100) InAs substrates. High-output powers of 660 mW in pulse mode and 300 mW in continuous wave operation with 400-μm cavity length and 100-μm-wide aperture at 78 K have been obtained. These devices showed low threshold current density of 40 A/cm 2 , low internal loss of 3.0 cm/sup -1/, far-field /spl theta//sub /spl perp// of 34/spl deg/ with differential efficiency of 90% at 78 K, and high operating temperatures of 220 K.
- 1 February 1997
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 9 (2) , 173-175
InAsSbP-InAsSb-InAs diode lasers emitting at 3.2 /spl mu/m grown by metal-organic chemical vapor deposition
InAsSb-InAsSbP double heterostructure diode lasers have been grown by metal-organic chemical vapor deposition on (100) InAs substrates. High-output powers of 660 mW in pulse mode and 300 mW in continuous wave operation with 400-μm cavity length and 100-μm-wide aperture at 78 K have been obtained. These devices showed low threshold current density of 40 A/cm 2 , low internal loss of 3.0 cm/sup -1/, far-field /spl theta//sub /spl perp// of 34/spl deg/ with differential efficiency of 90% at 78 K, and high operating temperatures of 220 K.
- 27 January 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 70 (4) , 443-445
Compressively strained multiple quantum well InAsSb lasers emitting at 3.6 μm grown by metal-organic chemical vapor deposition
A compressively strained InAsSb/InAs multiple quantum-well (MQW) structure was grown by low-pressure metal-organic chemical vapor deposition. Maximum output power (from two facets) up to 1 W with differential efficiency about 70% was obtained from a MQW laser with stripe width of 100 μm and cavity length of 700 μm for emitting wavelength of 3.65 μm at 90 K in pulse mode operation. About 2 times lower threshold current density was obtained from the MQW lasers for a temperature range of 90 to 140 K compared to the double heterostructure lasers grown on the same growth conditions.
- 27 January 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 70 (4) , 443-445
Compressively strained multiple quantum well InAsSb lasers emitting at 3.6 μm grown by metal-organic chemical vapor deposition
A compressively strained InAsSb/InAs multiple quantum-well (MQW) structure was grown by low-pressure metal-organic chemical vapor deposition. Maximum output power (from two facets) up to 1 W with differential efficiency about 70% was obtained from a MQW laser with stripe width of 100 μm and cavity length of 700 μm for emitting wavelength of 3.65 μm at 90 K in pulse mode operation. About 2 times lower threshold current density was obtained from the MQW lasers for a temperature range of 90 to 140 K compared to the double heterostructure lasers grown on the same growth conditions.
- 6 January 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 70 (1) , 40-42
InAsSbP/InAsSb/InAs laser diodes (λ=3.2 μm) grown by low-pressure metal–organic chemical-vapor deposition
We report metal–organic chemical-vapor deposition-grown double heterostructure InAsSbP/InAsSb/InAs diode lasers emitting at 3.2 μm operating at temperatures up to 220 K with threshold current density of 40 at 77 K and characteristic temperature up to 42 K. Output powers as high as 260 mW in pulse mode and 60 mW in continuous wave operation have been obtained from an uncoated 100 μm stripe-width broad-area laser at 77 K. Comparison with theory shows that there is no significant nonradiative recombination mechanism for these lasers at 77 K.- 6 January 1997
- Published by AIP Publishing in Applied Physics Letters
- Vol. 70 (1) , 40-42
InAsSbP/InAsSb/InAs laser diodes (λ=3.2 μm) grown by low-pressure metal–organic chemical-vapor deposition
We report metal–organic chemical-vapor deposition-grown double heterostructure InAsSbP/InAsSb/InAs diode lasers emitting at 3.2 μm operating at temperatures up to 220 K with threshold current density of 40 at 77 K and characteristic temperature up to 42 K. Output powers as high as 260 mW in pulse mode and 60 mW in continuous wave operation have been obtained from an uncoated 100 μm stripe-width broad-area laser at 77 K. Comparison with theory shows that there is no significant nonradiative recombination mechanism for these lasers at 77 K.- 31 October 1994
- Published by AIP Publishing in Applied Physics Letters
- Vol. 65 (18) , 2260-2262
Theoretical investigation of minority carrier leakages of high-power 0.8 μm InGaAsP/InGaP/GaAs laser diodes
We report a theoretical model that accurately describes the effects of minority carrier leakage from the InGaAsP waveguide into InGaP cladding layers in high-power aluminum-free 0.8 μm InGaAsP/InGaP/GaAs separate confinement heterostructure lasers. Current leakage due to the relatively low band-gap discontinuity between the active region and the InGaP barrier can be eliminated by employing laser diodes with cavity length longer than 500 μm. Experimental results for lasers grown by low-pressure metalorganic chemical vapor deposition are in excellent agreement with the theoretical model.
- 31 October 1994
- Published by AIP Publishing in Applied Physics Letters
- Vol. 65 (18) , 2260-2262
Theoretical investigation of minority carrier leakages of high-power 0.8 μm InGaAsP/InGaP/GaAs laser diodes
We report a theoretical model that accurately describes the effects of minority carrier leakage from the InGaAsP waveguide into InGaP cladding layers in high-power aluminum-free 0.8 μm InGaAsP/InGaP/GaAs separate confinement heterostructure lasers. Current leakage due to the relatively low band-gap discontinuity between the active region and the InGaP barrier can be eliminated by employing laser diodes with cavity length longer than 500 μm. Experimental results for lasers grown by low-pressure metalorganic chemical vapor deposition are in excellent agreement with the theoretical model.
- 22 August 1994
- Published by AIP Publishing in Applied Physics Letters
- Vol. 65 (8) , 1004-1005
High-power InGaAsP/GaAs 0.8-μm laser diodes and peculiarities of operational characteristics
High‐power operation of 3 W in pulse mode, 750 mW in quasi‐continuous wave and 650 mW in continuous wave per uncoated facet from 100‐μm aperture has been demonstrated for 1‐mm‐long cavity InGaAsP/GaAs 808‐nm laser diodes prepared by low‐pressure metalorganic chemical vapor deposition. Threshold current density of 300 A/cm2, differential efficiency of 1.1 W/A, T0=155 °C, transverse beam divergence of 27°, and less than 2‐nm linewidth at 808 nm have been measured. No degradation has been observed after 1000 h of operation in a quasi‐continuous wave regime.
- 22 August 1994
- Published by AIP Publishing in Applied Physics Letters
- Vol. 65 (8) , 1004-1005
High-power InGaAsP/GaAs 0.8-μm laser diodes and peculiarities of operational characteristics
High‐power operation of 3 W in pulse mode, 750 mW in quasi‐continuous wave and 650 mW in continuous wave per uncoated facet from 100‐μm aperture has been demonstrated for 1‐mm‐long cavity InGaAsP/GaAs 808‐nm laser diodes prepared by low‐pressure metalorganic chemical vapor deposition. Threshold current density of 300 A/cm2, differential efficiency of 1.1 W/A, T0=155 °C, transverse beam divergence of 27°, and less than 2‐nm linewidth at 808 nm have been measured. No degradation has been observed after 1000 h of operation in a quasi‐continuous wave regime.