Chilla Damodara Reddy
Research Subjects
Chilla Damodara Reddy has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Yong-Wei Zhang
Institute of High Performance Computing (IHPC), Agency for Science, Technology and Research (A*STAR), Singapore, Singapore
4 shared publications - Sathyan Subbiah
Indian Institute of Technology Madras
2 shared publications - An Min Amanda Lee
Institute of Microelectronics
1 shared publication - Ashwin Ramasubramaniam
Department of Mechanical and Industrial Engineering University of Massachusetts Amherst 01003 Amherst MA
1 shared publication - B. Jayasena
Nanyang Technological University, School of Mechanical and Aerospace Engineering, Singapore 639798, Singapore
1 shared publication - Buddhika Jayasena
The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332
1 shared publication
Latest Publications
- Open Access
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 376, 27-31
Defect Density Reduction in 4H-SiC (0001) Epilayer via Growth-Interruption during Buffer Layer Growth
In this paper, we have investigated the influence of growth-interruption during buffer layer growth on killer defect density in SiC epilayer grown over 4H-SiC (0001) substrates. We have observed that the growth-interruption method reduces total killer defect density by ~45(±5)%. Implementing growth-interruption in the buffer layer is a novel approach to mitigate epitaxial defects such as in-grown stacking faults (SFs), triangular defects, and basal plane dislocations (BPDs) in the drift layer and provide an extra margin to bipolar degradation by terminating BPDs early in the heavily doped buffer layer. The defect reduction mechanism in the presence of hydrogen has been simulated using Kinetic Monte Carlo (KMC) simulations.
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 376, 27-31
Open AccessDefect Density Reduction in 4H-SiC (0001) Epilayer via Growth-Interruption during Buffer Layer Growth
In this paper, we have investigated the influence of growth-interruption during buffer layer growth on killer defect density in SiC epilayer grown over 4H-SiC (0001) substrates. We have observed that the growth-interruption method reduces total killer defect density by ~45(±5)%. Implementing growth-interruption in the buffer layer is a novel approach to mitigate epitaxial defects such as in-grown stacking faults (SFs), triangular defects, and basal plane dislocations (BPDs) in the drift layer and provide an extra margin to bipolar degradation by terminating BPDs early in the heavily doped buffer layer. The defect reduction mechanism in the presence of hydrogen has been simulated using Kinetic Monte Carlo (KMC) simulations.
- 9 September 2015
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 138 (1) , 011010
High Rake Angle Orthogonal Machining of Highly Ordered Pyrolytic Graphite Parallel to the Basal Plane
High rake angle orthogonal machining of highly ordered pyrolytic graphite (HOPG) parallel to the basal plane was carried out to synthesize few layers of graphene. The quality of the graphite sheets was found to be an alliance of any pre-existing defects in the HOPG and the nature of the machining process itself. Presence of pre-existing defects such as kinks and discontinuous layers were observed during the lateral examination of HOPG structure prior to machining. Evidence of flat, folded, and rolled structures were found in exfoliated graphite sheets in addition to defects such as two types of kink bands. Multiple spikes in measured cutting forces were seen during machining due to disturbances in tool movement. Molecular dynamic simulations were carried out to support the argument that specific pre-existing defects such as discontinuous layers cause the marked disturbances during machining.
- 9 September 2015
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 138 (1) , 011010
High Rake Angle Orthogonal Machining of Highly Ordered Pyrolytic Graphite Parallel to the Basal Plane
High rake angle orthogonal machining of highly ordered pyrolytic graphite (HOPG) parallel to the basal plane was carried out to synthesize few layers of graphene. The quality of the graphite sheets was found to be an alliance of any pre-existing defects in the HOPG and the nature of the machining process itself. Presence of pre-existing defects such as kinks and discontinuous layers were observed during the lateral examination of HOPG structure prior to machining. Evidence of flat, folded, and rolled structures were found in exfoliated graphite sheets in addition to defects such as two types of kink bands. Multiple spikes in measured cutting forces were seen during machining due to disturbances in tool movement. Molecular dynamic simulations were carried out to support the argument that specific pre-existing defects such as discontinuous layers cause the marked disturbances during machining.
- Open Access
- 17 July 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 12221
Two-dimensional van der Waals C60 molecular crystal
Two-dimensional (2D) atomic crystals, such as graphene and transition metal dichalcogenides et al. have drawn extraordinary attention recently. For these 2D materials, atoms within their monolayer are covalently bonded. An interesting question arises: Can molecules form a 2D monolayer crystal via van der Waals interactions? Here, we first study the structural stability of a free-standing infinite C60 molecular monolayer using molecular dynamic simulations and find that the monolayer is stable up to 600 K. We further study the mechanical properties of the monolayer and find that the elastic modulus, ultimate tensile stress and failure strain are 55–100 GPa, 90–155 MPa and 1.5–2.3%, respectively, depending on the stretching orientation. The monolayer fails due to shearing and cavitation under uniaxial tensile loading. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the monolayer are found to be delocalized and as a result, the band gap is reduced to only 60% of the isolated C60 molecule. Interestingly, this band gap can be tuned up to ±30% using strain engineering. Owing to its thermal stability, low density, strain-tunable semi-conducting characteristics and large bending flexibility, this van der Waals molecular monolayer crystal presents aplenty opportunities for developing novel applications in nanoelectronics.
- 17 July 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 12221
Open AccessTwo-dimensional van der Waals C60 molecular crystal
Two-dimensional (2D) atomic crystals, such as graphene and transition metal dichalcogenides et al. have drawn extraordinary attention recently. For these 2D materials, atoms within their monolayer are covalently bonded. An interesting question arises: Can molecules form a 2D monolayer crystal via van der Waals interactions? Here, we first study the structural stability of a free-standing infinite C60 molecular monolayer using molecular dynamic simulations and find that the monolayer is stable up to 600 K. We further study the mechanical properties of the monolayer and find that the elastic modulus, ultimate tensile stress and failure strain are 55–100 GPa, 90–155 MPa and 1.5–2.3%, respectively, depending on the stretching orientation. The monolayer fails due to shearing and cavitation under uniaxial tensile loading. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the monolayer are found to be delocalized and as a result, the band gap is reduced to only 60% of the isolated C60 molecule. Interestingly, this band gap can be tuned up to ±30% using strain engineering. Owing to its thermal stability, low density, strain-tunable semi-conducting characteristics and large bending flexibility, this van der Waals molecular monolayer crystal presents aplenty opportunities for developing novel applications in nanoelectronics.
- 24 January 2014
- Published by ASME International in Journal of Micro and Nano-Manufacturing
- Vol. 2 (1) , 011003
Formation of Carbon Nanoscrolls During Wedge-Based Mechanical Exfoliation of HOPG
Carbon nanoscrolls (CNS) of various forms are observed when highly ordered pyrolytic graphite (HOPG) is mechanically exfoliated using a wedge. We present two hypothesis of how such scrolls form. The first hypothesis is based on microscopy evidence of pre-existing folds in layer edges of the HOPG. The second hypothesis is based on the literature evidence that graphene sheets when subject to deformation can result in defects on the torn edges. The sample preparation process can induce such defects in the HOPG layers. We show using molecular simulations that the interaction of the moving wedge with certain fold geometries can trigger scroll formation, confirming the first hypothesis. To test the second hypothesis, we show using molecular simulations, that layers with edge defects, upon interacting with the moving wedge, can also form scrolls. In reality, both these factors could simultaneously cause scrolls to form. Opportunities exist in fine-tuning this wedge-based mechanical exfoliation process to synthesize CNS for use in potential applications.
- 24 January 2014
- Published by ASME International in Journal of Micro and Nano-Manufacturing
- Vol. 2 (1) , 011003
Formation of Carbon Nanoscrolls During Wedge-Based Mechanical Exfoliation of HOPG
Carbon nanoscrolls (CNS) of various forms are observed when highly ordered pyrolytic graphite (HOPG) is mechanically exfoliated using a wedge. We present two hypothesis of how such scrolls form. The first hypothesis is based on microscopy evidence of pre-existing folds in layer edges of the HOPG. The second hypothesis is based on the literature evidence that graphene sheets when subject to deformation can result in defects on the torn edges. The sample preparation process can induce such defects in the HOPG layers. We show using molecular simulations that the interaction of the moving wedge with certain fold geometries can trigger scroll formation, confirming the first hypothesis. To test the second hypothesis, we show using molecular simulations, that layers with edge defects, upon interacting with the moving wedge, can also form scrolls. In reality, both these factors could simultaneously cause scrolls to form. Opportunities exist in fine-tuning this wedge-based mechanical exfoliation process to synthesize CNS for use in potential applications.
- 2 April 2012
- Published by IOP Publishing in Nanotechnology
- Vol. 23 (16) , 165303
Patterned graphone—a novel template for molecular packing
Precise positioning and packing of nanoscale building blocks is essential for the fabrication of many nanoelectro-mechanical devices. Carrying out such manipulations at the nanoscale still remains a challenge. Here we propose the use of graphone domain arrays embedded in a graphene sheet as a template to precisely position and pack molecules. Our atomistic simulations show that a graphone domain is able to adopt well-defined three-dimensional geometries, which in turn create 'energy wells' to trap molecules by means of physisorption. Using the C60 molecule as a model block, the stable trapping conditions are identified. The present work presents a novel route to position and pack molecules for nanoengineering applications.
- 2 April 2012
- Published by IOP Publishing in Nanotechnology
- Vol. 23 (16) , 165303
Patterned graphone—a novel template for molecular packing
Precise positioning and packing of nanoscale building blocks is essential for the fabrication of many nanoelectro-mechanical devices. Carrying out such manipulations at the nanoscale still remains a challenge. Here we propose the use of graphone domain arrays embedded in a graphene sheet as a template to precisely position and pack molecules. Our atomistic simulations show that a graphone domain is able to adopt well-defined three-dimensional geometries, which in turn create 'energy wells' to trap molecules by means of physisorption. Using the C60 molecule as a model block, the stable trapping conditions are identified. The present work presents a novel route to position and pack molecules for nanoengineering applications.
- Open Access
- 21 February 2012
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 148
Kinetic nanofriction: a mechanism transition from quasi-continuous to ballistic-like Brownian regime
Surface diffusion of mobile adsorbates is not only the key to control the rate of dynamical processes on solid surfaces, e.g. epitaxial growth, but also of fundamental importance for recent technological applications, such as nanoscale electro-mechanical, tribological, and surface probing devices. Though several possible regimes of surface diffusion have been suggested, the nanoscale surface Brownian motion, especially in the technologically important low friction regimes, remains largely unexplored. Using molecular dynamics simulations, we show for the first time, that a C60 admolecule on a graphene substrate exhibits two distinct regimes of nanoscale Brownian motion: a quasi-continuous and a ballistic-like. A crossover between these two regimes is realized by changing the temperature of the system. We reveal that the underlying physical origin for this crossover is a mechanism transition of kinetic nanofriction arising from distinctive ways of interaction between the admolecule and the graphene substrate in these two regimes due to the temperature change. Our findings provide insight into surface mass transport and kinetic friction control at the nanoscale.
- 21 February 2012
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 148
Open AccessKinetic nanofriction: a mechanism transition from quasi-continuous to ballistic-like Brownian regime
Surface diffusion of mobile adsorbates is not only the key to control the rate of dynamical processes on solid surfaces, e.g. epitaxial growth, but also of fundamental importance for recent technological applications, such as nanoscale electro-mechanical, tribological, and surface probing devices. Though several possible regimes of surface diffusion have been suggested, the nanoscale surface Brownian motion, especially in the technologically important low friction regimes, remains largely unexplored. Using molecular dynamics simulations, we show for the first time, that a C60 admolecule on a graphene substrate exhibits two distinct regimes of nanoscale Brownian motion: a quasi-continuous and a ballistic-like. A crossover between these two regimes is realized by changing the temperature of the system. We reveal that the underlying physical origin for this crossover is a mechanism transition of kinetic nanofriction arising from distinctive ways of interaction between the admolecule and the graphene substrate in these two regimes due to the temperature change. Our findings provide insight into surface mass transport and kinetic friction control at the nanoscale.
- 9 March 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 94 (10) , 101904
Edge elastic properties of defect-free single-layer graphene sheets
An energetic model is proposed to describe the edge elastic properties of defect-free single-layer graphene sheets. Simulations with the adaptive intermolecular reactive empirical bond order potential are used to extract the edge stress and edge moduli for different edges structures, namely, zigzag and armchair edges, zigzag and armchair edges terminated with hydrogen, and reconstructed zigzag and armchair edges. It is found that the properties of graphene are sensitively dependent on the edge structures; armchair and zigzag edges with and without hydrogen termination are in compression, while reconstructed edges are in tension.
- 9 March 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 94 (10) , 101904
Edge elastic properties of defect-free single-layer graphene sheets
An energetic model is proposed to describe the edge elastic properties of defect-free single-layer graphene sheets. Simulations with the adaptive intermolecular reactive empirical bond order potential are used to extract the edge stress and edge moduli for different edges structures, namely, zigzag and armchair edges, zigzag and armchair edges terminated with hydrogen, and reconstructed zigzag and armchair edges. It is found that the properties of graphene are sensitively dependent on the edge structures; armchair and zigzag edges with and without hydrogen termination are in compression, while reconstructed edges are in tension.