Jong-Cheng Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jong-Cheng Wu has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Jann N. Yang
Professor, Dept. of Civil and Environmental Engineering, Univ. of California, Irvine, CA 92697
2 shared publicationsLiang-Yi Cheng
Department of Civil Engineering, Tamkang University, Taipei, Taiwan
1 shared publicationWei-Cheng Lu
Associate Professor, Dept. of Civil Engineering, Tamkang Univ., Taipei, Taiwan
1 shared publicationWen-Chung Hsu
Associate Professor, Dept. of Civil Engineering, Tamkang Univ., Taipei, Taiwan
1 shared publication
Latest Publications
- 1 January 2006
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 132 (1) , 89-101
Implementation of a Feasible Control Design Process Incorporating Robustness Criteria for Wind-Excited High-Rise Buildings
In this paper, a control design process incorporating robustness criteria is developed specifically for wind-excited high-rise buildings and its feasibility is experimentally verified by implementing on a four degree-of-freedom scaled (1:300) model of a high-rise building through wind tunnel tests in along-wind and across-wind directions. For feasibility toward mature application, considerations in the control design process are made as practical and thorough as possible. The main features of the proposed design process include a suitable identification scheme that can realistically model wind loads and the possible interaction between control devices and structure, as well as a systematic way of incorporating robustness criteria in the controller for reducing tracking error, rejecting noise, attenuating disturbance, and maintaining stability in the presence of system uncertainty. To account for the complexity of wind load in system identification, wind spectrum is obtained through the high-frequency force-balance tests, and the corresponding state space wind model is constructed. The nominal system with the robustness criteria employed is transformed into a generalized control problem that can be further converted into a set of linear matrix inequalities (LMIs). Consequently, strictly proper output feedback controllers are thus determined by a simpler solution procedure in searching the solution of LMIs. As observed from experimental results, the performances of proposed controllers are quite remarkable and comparable to those of classical linear quadratic Gaussian (LQG) controllers. Additionally, the proposed controllers are numerically demonstrated to be more robust than classical LQG controllers under the existence of system uncertainty. This successful implementation shows that the design process and robust controllers proposed are feasible for wind-excited high-rise buildings and the resulting control performance is promising.- 1 January 2006
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 132 (1) , 89-101
Implementation of a Feasible Control Design Process Incorporating Robustness Criteria for Wind-Excited High-Rise Buildings
In this paper, a control design process incorporating robustness criteria is developed specifically for wind-excited high-rise buildings and its feasibility is experimentally verified by implementing on a four degree-of-freedom scaled (1:300) model of a high-rise building through wind tunnel tests in along-wind and across-wind directions. For feasibility toward mature application, considerations in the control design process are made as practical and thorough as possible. The main features of the proposed design process include a suitable identification scheme that can realistically model wind loads and the possible interaction between control devices and structure, as well as a systematic way of incorporating robustness criteria in the controller for reducing tracking error, rejecting noise, attenuating disturbance, and maintaining stability in the presence of system uncertainty. To account for the complexity of wind load in system identification, wind spectrum is obtained through the high-frequency force-balance tests, and the corresponding state space wind model is constructed. The nominal system with the robustness criteria employed is transformed into a generalized control problem that can be further converted into a set of linear matrix inequalities (LMIs). Consequently, strictly proper output feedback controllers are thus determined by a simpler solution procedure in searching the solution of LMIs. As observed from experimental results, the performances of proposed controllers are quite remarkable and comparable to those of classical linear quadratic Gaussian (LQG) controllers. Additionally, the proposed controllers are numerically demonstrated to be more robust than classical LQG controllers under the existence of system uncertainty. This successful implementation shows that the design process and robust controllers proposed are feasible for wind-excited high-rise buildings and the resulting control performance is promising.- 31 May 2005
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 93 (5) , 413-434
Effects of attack angle on performance of actively controlled high-rise building motion
- 31 May 2005
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 93 (5) , 413-434
Effects of attack angle on performance of actively controlled high-rise building motion
- 1 April 2004
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 130 (4) , 499-504
Modified Sliding Mode Control for Wind-Excited Benchmark Problem
Among promising control strategies, the sliding mode control is particularly robust with respect to structural uncertainty. In this paper, a modified sliding mode control (MSMC) strategy using dynamic output feedback is presented and demonstrated for the wind-excited benchmark building equipped with an ATMD (active tuned mass damper) control device. The main advantage of the MSMC presented is its ability to systematically modulate the control effort through the introduction of a prefilter prior to the control force. For practical implementation of a MSMC using acceleration measurements at strategic locations, a Kalman–Bucy filter type of observer is designed based on the augmented system. Hence the sliding surface design is composed of the observer state, and the modulation of control forces can be achieved by forming an optimization problem with a linear quadratic objective function. As shown by the simulation results of the wind-excited benchmark building, the modified sliding mode controller indeed has the capability of systematically modulating the control force. Moreover, the remarkable performance of the MSMC demonstrates that the strategy presented is suitable for the wind-excited tall buildings.
- 1 April 2004
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 130 (4) , 499-504
Modified Sliding Mode Control for Wind-Excited Benchmark Problem
Among promising control strategies, the sliding mode control is particularly robust with respect to structural uncertainty. In this paper, a modified sliding mode control (MSMC) strategy using dynamic output feedback is presented and demonstrated for the wind-excited benchmark building equipped with an ATMD (active tuned mass damper) control device. The main advantage of the MSMC presented is its ability to systematically modulate the control effort through the introduction of a prefilter prior to the control force. For practical implementation of a MSMC using acceleration measurements at strategic locations, a Kalman–Bucy filter type of observer is designed based on the augmented system. Hence the sliding surface design is composed of the observer state, and the modulation of control forces can be achieved by forming an optimization problem with a linear quadratic objective function. As shown by the simulation results of the wind-excited benchmark building, the modified sliding mode controller indeed has the capability of systematically modulating the control force. Moreover, the remarkable performance of the MSMC demonstrates that the strategy presented is suitable for the wind-excited tall buildings.
- 19 July 2000
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 29 (9) , 1325-1342
Modeling of an actively braced full‐scale building considering control–structure interaction
- 19 July 2000
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 29 (9) , 1325-1342
Modeling of an actively braced full‐scale building considering control–structure interaction
- 27 June 2000
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 29 (8) , 1111-1130
LQG control of lateral–torsional motion of Nanjing TV transmission tower
- 27 June 2000
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 29 (8) , 1111-1130
LQG control of lateral–torsional motion of Nanjing TV transmission tower