Wen-Fang Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wen-Fang Wu has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Chih-Yen Su
Department of Mechanical Engineering , National Taiwan University , Taipei , 10617 , Taiwan
2 shared publicationsPin-Chen Wang
Department of Mechanical Engineering National Taiwan University Taipei Taiwan
2 shared publicationsSue-Ray Lin
Department of Mechanical Engineering, National Taiwan University, Taiwan
2 shared publications- Ting-Wei Shen
Department of Mechanical Engineering, National Taiwan University, Taipei 106, Taiwan
2 shared publications Yao Hsu
Department of Business and Entrepreneurial Management , Kainan University , Luzhu Shiang, Taoyuan , 33857 , Taiwan
2 shared publications- Zong-Liang Tseng
Department of Electronic Engineering, Ming Chi University of Technology, New Taipei City 24301, Taiwan
2 shared publications
Latest Publications
- Open Access
The Enhanced Thermal Stability of (Mg0.95Ni0.05)2TiO4 Dielectric Ceramics Modified by a Multi-Phase Method
The thermal stability of (Mg0.95Ni0.05)2TiO4 dielectric ceramics has been improved by mixing with CaTiO3 phases owing to higher positive temperature coefficients. The pure (Mg0.95Ni0.05)2TiO4 and the mixture phase systems of CaTiO3-modified (Mg0.95Ni0.05)2TiO4 were verified by XRD diffraction patterns to ensure the crystallite of different phases. The microstructures of the CaTiO3-modified (Mg0.95Ni0.05)2TiO4 were observed by SEM and EDS to investigate the relation between element ratios and grains. As a result, it can be seen that the thermal stability of the CaTiO3-modified (Mg0.95Ni0.05)2TiO4 can be effectively enhanced, compared with the pure (Mg0.95Ni0.05)2TiO4. Moreover, the radio frequency dielectric performances of CaTiO3-modified (Mg0.95Ni0.05)2TiO4 dielectric ceramics are strongly dependent upon the density and the morphology of the specimens. The champion sample with the ratio of (Mg0.95Ni0.05)2TiO4 and CaTiO3 of 0.92:0.08 showed an εr value of 19.2, an Qf value of 108,200 GHz, and a τf value of −4.8 ppm/°C, which may encourage (Mg0.95Ni0.05)2TiO4 ceramics to broaden the range of novel applications and match the requirements of 5G or next-generation communication systems.
Open AccessThe Enhanced Thermal Stability of (Mg0.95Ni0.05)2TiO4 Dielectric Ceramics Modified by a Multi-Phase Method
The thermal stability of (Mg0.95Ni0.05)2TiO4 dielectric ceramics has been improved by mixing with CaTiO3 phases owing to higher positive temperature coefficients. The pure (Mg0.95Ni0.05)2TiO4 and the mixture phase systems of CaTiO3-modified (Mg0.95Ni0.05)2TiO4 were verified by XRD diffraction patterns to ensure the crystallite of different phases. The microstructures of the CaTiO3-modified (Mg0.95Ni0.05)2TiO4 were observed by SEM and EDS to investigate the relation between element ratios and grains. As a result, it can be seen that the thermal stability of the CaTiO3-modified (Mg0.95Ni0.05)2TiO4 can be effectively enhanced, compared with the pure (Mg0.95Ni0.05)2TiO4. Moreover, the radio frequency dielectric performances of CaTiO3-modified (Mg0.95Ni0.05)2TiO4 dielectric ceramics are strongly dependent upon the density and the morphology of the specimens. The champion sample with the ratio of (Mg0.95Ni0.05)2TiO4 and CaTiO3 of 0.92:0.08 showed an εr value of 19.2, an Qf value of 108,200 GHz, and a τf value of −4.8 ppm/°C, which may encourage (Mg0.95Ni0.05)2TiO4 ceramics to broaden the range of novel applications and match the requirements of 5G or next-generation communication systems.
- Open Access
- 9 March 2023
- Published by IEOM Society International
Effect of Performance Discrepancy of Cells on the Reliability Analysis of an EV Battery Pack
With the rapid development of electric vehicle (EV), researches related to EV battery systems have flourished in recent years, partly because the battery system accounts for almost half of the cost of an EV. For the battery system, its capacity degraded gradually along with charge-and-discharge cycles and hence increases the risk of the EV. The reliability issue of the battery system thus arises. The present study proposes an analytical model based on reliability engineering for studying the capacity degradation and quantitative reliability of EV battery packs. The model, in turn, is constructed in consideration of states of health (SOH) of battery cells and their uncertainties. As compared to the traditional system reliability model that judges the pack's reliability purely based on considering if or not a battery cell's SOH exceeds a prescribed threshold, the proposed model adopts the k-out-of-n system reliability concept and considers that SOHs of battery cells within the pack do not differ too much to assure the pack's reliability. This study also adjusts a few parametric values in the model to investigate their influences on battery pack's life and reliability. Through numerical case studies, it is found the proposed model results in a more conservative system reliability prediction of a battery pack than the traditional model, and the capacity degradation trend of the battery pack coincides with a real case. In consideration of an effective battery management system that avoids fierce temperature changes, the influence of temperature is not very obvious in this study. The uneven performance of battery cells reflected by discrepancies of their SOHs is found crucial to the battery pack. If the performance of each battery cell is balanced, the battery pack's life and reliability would increase significantly. The above trends coincide with those factors considered in a real battery management system (BMS) of an EV.
- 9 March 2023
- Published by IEOM Society International
Open AccessEffect of Performance Discrepancy of Cells on the Reliability Analysis of an EV Battery Pack
With the rapid development of electric vehicle (EV), researches related to EV battery systems have flourished in recent years, partly because the battery system accounts for almost half of the cost of an EV. For the battery system, its capacity degraded gradually along with charge-and-discharge cycles and hence increases the risk of the EV. The reliability issue of the battery system thus arises. The present study proposes an analytical model based on reliability engineering for studying the capacity degradation and quantitative reliability of EV battery packs. The model, in turn, is constructed in consideration of states of health (SOH) of battery cells and their uncertainties. As compared to the traditional system reliability model that judges the pack's reliability purely based on considering if or not a battery cell's SOH exceeds a prescribed threshold, the proposed model adopts the k-out-of-n system reliability concept and considers that SOHs of battery cells within the pack do not differ too much to assure the pack's reliability. This study also adjusts a few parametric values in the model to investigate their influences on battery pack's life and reliability. Through numerical case studies, it is found the proposed model results in a more conservative system reliability prediction of a battery pack than the traditional model, and the capacity degradation trend of the battery pack coincides with a real case. In consideration of an effective battery management system that avoids fierce temperature changes, the influence of temperature is not very obvious in this study. The uneven performance of battery cells reflected by discrepancies of their SOHs is found crucial to the battery pack. If the performance of each battery cell is balanced, the battery pack's life and reliability would increase significantly. The above trends coincide with those factors considered in a real battery management system (BMS) of an EV.
- Open Access
- 9 March 2023
- Published by IEOM Society International
Life Modeling and Reliability Analysis of Lithium-ion Batteries Used in Electric Vehicles
Lithium-ion batteries have gradually become the mainstream of batteries used in electric vehicles due to their advantages such as high energy density and long lifetime. This research aims to establish a reliability-based mathematical model that considers uncertainties of the degradation of lithium-ion batteries. The model can be used to evaluate the lifetime distribution and reliability of a selected type of lithium-ion battery. Based on the actual battery test data, this research considers battery performance under different operational environments as well as the uncertainty existed for each battery and proposes two capacity loss formulas to describe respectively the declines of battery capacity along with time when it is in storage and charge-and-discharge cycle when it is in use. According to the model, the battery lifetime distribution and reliability can be evaluated, and the failure probability of the battery at any given time can be obtained. This research also converts a vehicle's daily driving distance into a random depth of discharge, and explores the impact of different driving habits and charging methods on battery degradation. Research results show that state of charge (SOC) is one of the main factors affecting battery degradation. It is also found that selecting a lower battery charging limit and avoiding frequent shallow discharge under high SOC can slow down the degradation, and greatly extend the lifetime and improve the reliability of the battery.
- 9 March 2023
- Published by IEOM Society International
Open AccessLife Modeling and Reliability Analysis of Lithium-ion Batteries Used in Electric Vehicles
Lithium-ion batteries have gradually become the mainstream of batteries used in electric vehicles due to their advantages such as high energy density and long lifetime. This research aims to establish a reliability-based mathematical model that considers uncertainties of the degradation of lithium-ion batteries. The model can be used to evaluate the lifetime distribution and reliability of a selected type of lithium-ion battery. Based on the actual battery test data, this research considers battery performance under different operational environments as well as the uncertainty existed for each battery and proposes two capacity loss formulas to describe respectively the declines of battery capacity along with time when it is in storage and charge-and-discharge cycle when it is in use. According to the model, the battery lifetime distribution and reliability can be evaluated, and the failure probability of the battery at any given time can be obtained. This research also converts a vehicle's daily driving distance into a random depth of discharge, and explores the impact of different driving habits and charging methods on battery degradation. Research results show that state of charge (SOC) is one of the main factors affecting battery degradation. It is also found that selecting a lower battery charging limit and avoiding frequent shallow discharge under high SOC can slow down the degradation, and greatly extend the lifetime and improve the reliability of the battery.
- Open Access
- 9 March 2023
- Published by IEOM Society International
State-of-Health Prediction and Reliability Analysis of Li-ion Battery
Electric vehicles have become a trend in vehicle development in recent years due to their low noise, low pollution, and reusable batteries. However, the batteries of electric vehicles will gradually fade out with the number of chargeand-discharge cycles, and may cause fire or explosion hazards. Battery life and reliability have thus become important research issues. Among the commonly used batteries for electric vehicles, lithium-ion batteries are often used by electric vehicle manufacturers today because of their high-power storage, small size, and high energy density. The state-of-health (SOH) is the most commonly used indicator for evaluating the fading degree of lithium-ion batteries. For the battery, its SOH will gradually decrease with the number of charge-and-discharge cycles. When the average value of a battery system drops to be less than 80%, the vehicle manufacturer will advise the vehicle owner to replace the battery system to avoid inconveniences and potential hazards. In order to ensure the safety of battery cells used in electric vehicles, this study proposes a semi-empirical model to predict the SOH of a battery based on its ambient temperature during battery operation, the number of charge-and-discharge cycles, the discharge rate, and the nominal capacity and specifically discusses the number of charge-and-discharge cycles experienced when SOH is lower than 80%. The proposed model can be used as an evaluation tool to understand the degree of battery aging through quantitative reliability analysis, and explores how the uncertainty of coefficients in the semi-empirical model for understanding its impact on the prediction results. At the end of this study, through the analysis of different types of lithium-ion batteries, and assuming that the effects of the internal chemical reaction of the battery do not affect the prediction of SOH during the charge-and-discharge cycle, the difference in the model's SOH curve-fitting under different conditions are discussed in particular. Different applications are also addressed. In this study, the number of charge-and-discharge cycles predicted by the semi-empirical model can be used to estimate the degree of battery aging, and the reliability analysis can be used to evaluate the battery usage, so that it can determine whether the battery needs to be replaced, and can minimize the probability of occurrence of hazards.
- 9 March 2023
- Published by IEOM Society International
Open AccessState-of-Health Prediction and Reliability Analysis of Li-ion Battery
Electric vehicles have become a trend in vehicle development in recent years due to their low noise, low pollution, and reusable batteries. However, the batteries of electric vehicles will gradually fade out with the number of chargeand-discharge cycles, and may cause fire or explosion hazards. Battery life and reliability have thus become important research issues. Among the commonly used batteries for electric vehicles, lithium-ion batteries are often used by electric vehicle manufacturers today because of their high-power storage, small size, and high energy density. The state-of-health (SOH) is the most commonly used indicator for evaluating the fading degree of lithium-ion batteries. For the battery, its SOH will gradually decrease with the number of charge-and-discharge cycles. When the average value of a battery system drops to be less than 80%, the vehicle manufacturer will advise the vehicle owner to replace the battery system to avoid inconveniences and potential hazards. In order to ensure the safety of battery cells used in electric vehicles, this study proposes a semi-empirical model to predict the SOH of a battery based on its ambient temperature during battery operation, the number of charge-and-discharge cycles, the discharge rate, and the nominal capacity and specifically discusses the number of charge-and-discharge cycles experienced when SOH is lower than 80%. The proposed model can be used as an evaluation tool to understand the degree of battery aging through quantitative reliability analysis, and explores how the uncertainty of coefficients in the semi-empirical model for understanding its impact on the prediction results. At the end of this study, through the analysis of different types of lithium-ion batteries, and assuming that the effects of the internal chemical reaction of the battery do not affect the prediction of SOH during the charge-and-discharge cycle, the difference in the model's SOH curve-fitting under different conditions are discussed in particular. Different applications are also addressed. In this study, the number of charge-and-discharge cycles predicted by the semi-empirical model can be used to estimate the degree of battery aging, and the reliability analysis can be used to evaluate the battery usage, so that it can determine whether the battery needs to be replaced, and can minimize the probability of occurrence of hazards.
- Open Access
- 1 February 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-18
Risk Assessment and Enhancement Suggestions for Automated Driving Systems through Examining Testing Collision and Disengagement Reports
The California Department of Motor Vehicles (DMV) reports, including disengagement and collision reports, provide information on each accident or disengagement activity for on-road testing of autonomous driving systems (ADSs) and autonomous vehicles (AVs). Unfortunately, current DMV reports have been misleading in relation to many key details, making it challenging for readers of those reports to discern the events’ root causes and interrelationships. Therefore, appropriate systematic classification methods and principles need to be adopted. We follow an identification method similar to fault tree analysis (FTA) with the help of the driving reliability and error analysis method (DREAM 3.0) and the Haddon matrix to find the potential key accident factors from all disengagement data. We also conduct ADS risk assessments of potential disengagements and genuine accidents classified by traditional accident types. In addition, the automated driving system is composed of various software modules, and a classification method that is suitable from the standpoint of ADS software developers is developed in this paper. Next, we sort out the characteristics of the most frequent accidents based on the risk assessment results. Finally, we propose a workable risk reduction solution according to the characteristics of accidents.
- 1 February 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-18
Open AccessRisk Assessment and Enhancement Suggestions for Automated Driving Systems through Examining Testing Collision and Disengagement Reports
The California Department of Motor Vehicles (DMV) reports, including disengagement and collision reports, provide information on each accident or disengagement activity for on-road testing of autonomous driving systems (ADSs) and autonomous vehicles (AVs). Unfortunately, current DMV reports have been misleading in relation to many key details, making it challenging for readers of those reports to discern the events’ root causes and interrelationships. Therefore, appropriate systematic classification methods and principles need to be adopted. We follow an identification method similar to fault tree analysis (FTA) with the help of the driving reliability and error analysis method (DREAM 3.0) and the Haddon matrix to find the potential key accident factors from all disengagement data. We also conduct ADS risk assessments of potential disengagements and genuine accidents classified by traditional accident types. In addition, the automated driving system is composed of various software modules, and a classification method that is suitable from the standpoint of ADS software developers is developed in this paper. Next, we sort out the characteristics of the most frequent accidents based on the risk assessment results. Finally, we propose a workable risk reduction solution according to the characteristics of accidents.
- Open Access
- 24 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3320
Improving Image Quality Assessment Based on the Combination of the Power Spectrum of Fingerprint Images and Prewitt Filter
The assessment of fingerprint image quality is critical for most fingerprint applications. It has an impact on the performance and compatibility of fingerprint recognition, authentication, and built-in cryptosystems. This paper developed an improved fingerprint image quality assessment derived from the image power spectrum approach and combined it with the Prewitt filter and an improved weighting method. The conventional image power spectrum approach and our proposed approach were implemented for accuracy and reliability tests using good, faulty, and blurred fingerprint images. The experimental results showed the proposed algorithm accurately identified the sharpness of fingerprint images and improved the average difference in FIQMs to 61% between three different levels of blurred fingerprints compared with that achieved by a conventional algorithm.
- 24 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3320
Open AccessImproving Image Quality Assessment Based on the Combination of the Power Spectrum of Fingerprint Images and Prewitt Filter
The assessment of fingerprint image quality is critical for most fingerprint applications. It has an impact on the performance and compatibility of fingerprint recognition, authentication, and built-in cryptosystems. This paper developed an improved fingerprint image quality assessment derived from the image power spectrum approach and combined it with the Prewitt filter and an improved weighting method. The conventional image power spectrum approach and our proposed approach were implemented for accuracy and reliability tests using good, faulty, and blurred fingerprint images. The experimental results showed the proposed algorithm accurately identified the sharpness of fingerprint images and improved the average difference in FIQMs to 61% between three different levels of blurred fingerprints compared with that achieved by a conventional algorithm.
- Open Access
Half-Metallic Property Induced by Double Exchange Interaction in the Double Perovskite Bi2BB′O6 (B, B′ = 3d Transitional Metal) via First-Principles Calculations
In this paper, we identify three possible candidate series of half-metals (HM) from Bi-based double perovskites Bi2BB′O6 (BB′ = transition metal ions) through calculations utilizing the density functional theory (DFT) and full-structural optimization, in which the generalized gradient approximation (GGA) and the strong correlation effect (GGA + U) are considered. After observing the candidate materials under four types of magnetic states, i.e., ferromagnetic (FM), ferrimagnetic (FiM), antiferromagnetic (AF), and nonmagnetic (NM), we found eight promising candidates for half-metallic materials. Under the GGA scheme, there are three ferromagnetic-half-metal (FM-HM) materials, Bi2CrCoO6, Bi2CrNiO6 and Bi2FeNiO6, and three FiM-HM materials, Bi2FeZnO6, Bi2CrZnO6 and Bi2CoZnO6. With implementation of the Coulomb interaction correction (GGA + U), we find two stable half-metallic materials: Bi2CrNiO6 and Bi2CrZnO6. We determine that the stability of some of these materials are tied to the double exchange interaction, an indirect interaction within the higher powers of localized spin interaction among transition metals via oxygen ions. Found in half-metallic materials, and especially those in the ferromagnetic (FM) state, the double exchange interaction is recognized in the FM-HM materials Bi2CrCoO6 and Bi2FeNiO6.
Open AccessHalf-Metallic Property Induced by Double Exchange Interaction in the Double Perovskite Bi2BB′O6 (B, B′ = 3d Transitional Metal) via First-Principles Calculations
In this paper, we identify three possible candidate series of half-metals (HM) from Bi-based double perovskites Bi2BB′O6 (BB′ = transition metal ions) through calculations utilizing the density functional theory (DFT) and full-structural optimization, in which the generalized gradient approximation (GGA) and the strong correlation effect (GGA + U) are considered. After observing the candidate materials under four types of magnetic states, i.e., ferromagnetic (FM), ferrimagnetic (FiM), antiferromagnetic (AF), and nonmagnetic (NM), we found eight promising candidates for half-metallic materials. Under the GGA scheme, there are three ferromagnetic-half-metal (FM-HM) materials, Bi2CrCoO6, Bi2CrNiO6 and Bi2FeNiO6, and three FiM-HM materials, Bi2FeZnO6, Bi2CrZnO6 and Bi2CoZnO6. With implementation of the Coulomb interaction correction (GGA + U), we find two stable half-metallic materials: Bi2CrNiO6 and Bi2CrZnO6. We determine that the stability of some of these materials are tied to the double exchange interaction, an indirect interaction within the higher powers of localized spin interaction among transition metals via oxygen ions. Found in half-metallic materials, and especially those in the ferromagnetic (FM) state, the double exchange interaction is recognized in the FM-HM materials Bi2CrCoO6 and Bi2FeNiO6.
- 12 March 2019
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 76 (8) , 6280-6301
Detecting removed attributes in the cyber system for smart manufacturing
- 12 March 2019
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 76 (8) , 6280-6301
Detecting removed attributes in the cyber system for smart manufacturing
- 12 October 2018
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 167, 18-24
Probabilistic safety assessment of BWR shroud-support weldments with multiple through-wall cracks
- 12 October 2018
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 167, 18-24
Probabilistic safety assessment of BWR shroud-support weldments with multiple through-wall cracks