Shujuan Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shujuan Dai has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Lei Zhang
School of Chemical Engineering, University of Science and Technology Liaoning, Anshan 114051, PR China
2 shared publications Tian Ai
School of Mining Engineering, University of Science and Technology Liaoning, PR China
2 shared publications- Xiaojun Jiang
University of Science and Technology Liaoning
2 shared publications Xiaoxi Tian
School of Chemical Engineering, University of Science and Technology Liaoning, Anshan 114051, PR China
2 shared publicationsChunmei Xu
Technical Development (Engineering) Department, Shandong Hualu Hengsheng Chemical Co., Ltd , Dezhou 253019 , Shandong , People’s Republic of China
1 shared publicationDachao Li
Production Department, Hengli Petrochemical (Dalian) Co., Ltd, PR China
1 shared publication
Latest Publications
- Open Access
- 25 March 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (16) , 9995-10004
An efficient removal mechanism for different hydrophilic antibiotics from aquatic environments by Cu–Al–Fe–Cr quasicrystals
The work studied the adsorption properties and mechanism of Cu–Al–Fe–Cr quasicrystals (QCs) for the adsorption of ibuprofen (IBU), tedizolid phosphate (TZD), and sulbactam sodium (SAM) for the first time. The experimental results showed that quasicrystals were good adsorbents with great potential. The structure, surface morphology, and elemental composition of QCs were investigated by XPS, XRD, SEM, EDX, particle size, DSC-TG, and FTIR. The adsorption pH, kinetics, thermodynamics, and isotherms of IBU, TZD, and SAM in QCs were systematically studied. QCs had good adsorption performance for antibiotics, and the adsorption capacities of IBU, TZD, and SAM were 46.964, 49.206, and 35.292 mg g−1 at the concentration of 25 mg L−1, respectively. The surface charge and hydrophobicity of QCs were affected by changing pH, thereby affecting the adsorption performance of QCs. The main driving forces of adsorption included electrostatic force and hydrophobicity.
- 25 March 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (16) , 9995-10004
Open AccessAn efficient removal mechanism for different hydrophilic antibiotics from aquatic environments by Cu–Al–Fe–Cr quasicrystals
The work studied the adsorption properties and mechanism of Cu–Al–Fe–Cr quasicrystals (QCs) for the adsorption of ibuprofen (IBU), tedizolid phosphate (TZD), and sulbactam sodium (SAM) for the first time. The experimental results showed that quasicrystals were good adsorbents with great potential. The structure, surface morphology, and elemental composition of QCs were investigated by XPS, XRD, SEM, EDX, particle size, DSC-TG, and FTIR. The adsorption pH, kinetics, thermodynamics, and isotherms of IBU, TZD, and SAM in QCs were systematically studied. QCs had good adsorption performance for antibiotics, and the adsorption capacities of IBU, TZD, and SAM were 46.964, 49.206, and 35.292 mg g−1 at the concentration of 25 mg L−1, respectively. The surface charge and hydrophobicity of QCs were affected by changing pH, thereby affecting the adsorption performance of QCs. The main driving forces of adsorption included electrostatic force and hydrophobicity.
- Open Access
- 1 January 2022
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 20 (1) , 388-400
Microwave-assisted preparation of Ag/Fe magnetic biochar from clivia leaves for adsorbing daptomycin antibiotics
Novel clivia biochar adsorbing daptomycin (DAP) was prepared by microwave digestion–anaerobic carbonization in this work. Fe/Ag submicron particles were introduced to the biochar surface based on the reducibility of biochar to enhance its adsorption capacity. Characterization confirmed that modified biochar (AF-biochar) had a higher particle size (126 μm), larger specific surface area (521.692 m2 g−1), richer pore structure, and higher thermal stability. The effects of the main variables (e.g., the solution pH, contact time, initial DAP concentration, and temperature) were investigated during adsorption. The results showed that AF-biochar could reach the adsorption equilibrium at pH 4.8 for 85 min. Besides, the adsorption capacity was 48.25 mg g−1, and the adsorption efficiency was 96.50% when the concentration of DAP was 25 mg L−1. The pseudo-second-order kinetics (R 2 = 0.9997), Langmuir equation (R 2 = 0.9999), and thermodynamics (R 2 = 0.9631) of AF-biochar fit well, indicating that the main adsorption process of AF-biochar was spontaneous, exothermic, and monolayer. Their adsorption was analyzed by physical and chemical adsorption. The main adsorption mechanisms included the electron donor–acceptor interaction, electrostatic force interaction, Lewis acid–base interaction, and H-bond interaction.
- 1 January 2022
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 20 (1) , 388-400
Open AccessMicrowave-assisted preparation of Ag/Fe magnetic biochar from clivia leaves for adsorbing daptomycin antibiotics
Novel clivia biochar adsorbing daptomycin (DAP) was prepared by microwave digestion–anaerobic carbonization in this work. Fe/Ag submicron particles were introduced to the biochar surface based on the reducibility of biochar to enhance its adsorption capacity. Characterization confirmed that modified biochar (AF-biochar) had a higher particle size (126 μm), larger specific surface area (521.692 m2 g−1), richer pore structure, and higher thermal stability. The effects of the main variables (e.g., the solution pH, contact time, initial DAP concentration, and temperature) were investigated during adsorption. The results showed that AF-biochar could reach the adsorption equilibrium at pH 4.8 for 85 min. Besides, the adsorption capacity was 48.25 mg g−1, and the adsorption efficiency was 96.50% when the concentration of DAP was 25 mg L−1. The pseudo-second-order kinetics (R 2 = 0.9997), Langmuir equation (R 2 = 0.9999), and thermodynamics (R 2 = 0.9631) of AF-biochar fit well, indicating that the main adsorption process of AF-biochar was spontaneous, exothermic, and monolayer. Their adsorption was analyzed by physical and chemical adsorption. The main adsorption mechanisms included the electron donor–acceptor interaction, electrostatic force interaction, Lewis acid–base interaction, and H-bond interaction.
- 20 January 2021
- Published by Springer Nature in JOM
- Vol. 73 (3) , 856-861
Preparation of Magnesia from Hydromagnesite Ore by Calcination
- 20 January 2021
- Published by Springer Nature in JOM
- Vol. 73 (3) , 856-861
Preparation of Magnesia from Hydromagnesite Ore by Calcination
- 6 October 2020
- Published by Politechnika Wroclawska Oficyna Wydawnicza in Physicochemical Problems of Mineral Processing
- Vol. 57 (1) , 18-28
An experimental study of removing impurity from a quartz ore by microbial flotation-acid leaching
The purity of a quartz ore is relatively low at a SiO2 content of 97.18%, and the main impurity in the ore is Fe, Al, and Ca bearing minerals. The main component in an industrial waste bacteria (WJ) is polysaccharides, which may be used as depressors for inhibiting iron minerals in quartz...
- 6 October 2020
- Published by Politechnika Wroclawska Oficyna Wydawnicza in Physicochemical Problems of Mineral Processing
- Vol. 57 (1) , 18-28
An experimental study of removing impurity from a quartz ore by microbial flotation-acid leaching
The purity of a quartz ore is relatively low at a SiO2 content of 97.18%, and the main impurity in the ore is Fe, Al, and Ca bearing minerals. The main component in an industrial waste bacteria (WJ) is polysaccharides, which may be used as depressors for inhibiting iron minerals in quartz...
- Open Access
- 10 August 2020
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 38 (7-8) , 304-321
Methanol-modified ultra-fine magnetic orange peel powder biochar as an effective adsorbent for removal of ibuprofen and sulfamethoxazole from water
The efficient capture of drug metabolites from aquatic environments has been recognized as an essential task for environmental protection. A methanol-modified ultra-fine magnetic biochar (CH3OH-OP-char/Fe3O4) was prepared from orange peel powder using ball milling, and its adsorption behaviors for ibuprofen and sulfamethoxazole were evaluated. The obtained materials were characterized by laser particle size analyzer, EA, ICP-OES, VSM, BET, TG-DTG, and FTIR. Furthermore, the experiments were conducted to study the vital operating parameters such as solution pH (2.0–11.0), contact time (0.5–240 min), initial drug concentration (0.5–100 mg/L), and temperatures (15–40°C) on the removal process. The results showed that the adsorption of IBP and sulfamethoxazole on CH3OH-OP-char/Fe3O4 was highly pH-dependent. Kinetic studies indicated that physisorption was the dominant adsorption mechanism, and film diffusion played a vital role in adsorption onto CH3OH-OP-char/Fe3O4. Equilibrium data were fitted well with the Langmuir isotherm model, implying monolayer adsorption. The adsorption process was spontaneous and endothermic due to the thermodynamic calculation, and high temperatures were favorable to the adsorption process.
- 10 August 2020
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 38 (7-8) , 304-321
Open AccessMethanol-modified ultra-fine magnetic orange peel powder biochar as an effective adsorbent for removal of ibuprofen and sulfamethoxazole from water
The efficient capture of drug metabolites from aquatic environments has been recognized as an essential task for environmental protection. A methanol-modified ultra-fine magnetic biochar (CH3OH-OP-char/Fe3O4) was prepared from orange peel powder using ball milling, and its adsorption behaviors for ibuprofen and sulfamethoxazole were evaluated. The obtained materials were characterized by laser particle size analyzer, EA, ICP-OES, VSM, BET, TG-DTG, and FTIR. Furthermore, the experiments were conducted to study the vital operating parameters such as solution pH (2.0–11.0), contact time (0.5–240 min), initial drug concentration (0.5–100 mg/L), and temperatures (15–40°C) on the removal process. The results showed that the adsorption of IBP and sulfamethoxazole on CH3OH-OP-char/Fe3O4 was highly pH-dependent. Kinetic studies indicated that physisorption was the dominant adsorption mechanism, and film diffusion played a vital role in adsorption onto CH3OH-OP-char/Fe3O4. Equilibrium data were fitted well with the Langmuir isotherm model, implying monolayer adsorption. The adsorption process was spontaneous and endothermic due to the thermodynamic calculation, and high temperatures were favorable to the adsorption process.
- Open Access
- 28 May 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (35) , 20427-20437
Single-component and competitive adsorption of tetracycline and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar from water: studies on the kinetics, isotherms, and mechanism
Single-component and competitive adsorption of tetracycline (TC) and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar (NH4Cl-BHP-char/Fe3O4) was investigated in batch experiments.
- 28 May 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (35) , 20427-20437
Open AccessSingle-component and competitive adsorption of tetracycline and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar from water: studies on the kinetics, isotherms, and mechanism
Single-component and competitive adsorption of tetracycline (TC) and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar (NH4Cl-BHP-char/Fe3O4) was investigated in batch experiments.
- 25 June 2019
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 43 (10) , 1151-1161
Study on the adsorption mechanisms of gold chloride on the surface of fine quartz
The fine quartz was mixed with gold chloride solution to perform stirring contrast experiment under the condition of with and without iodization. Experimental factors were studied in order to gain the best inhibitory effect of iodization about adsorption effect of quartz on gold chloride, including gold solution concentration, stirring speed, stirring time, and KI-I2 dosage. Adsorption property of quartz on gold chloride was obtained by fitting and calculation of adsorption models. On the basis, the adsorption mechanism of quartz on gold chloride is revealed. Experimental results show that adsorbed amount without iodization is higher than with iodization, which is restrained by iodization. The best condition restrained adsorption is gold chloride of 100 mg/L, stirring speed of 500 r/min, stirring time of 8 min under condition of pH = 6 and 10% pulp density, and the best KI-I2 dosage are C(KI) = 2.5g/L and C(I2) = 2g/L. The fitting and calculation of adsorption models demonstrate that the adsorption of quartz on gold chloride contains favorable chemical adsorption in addition to physical adsorption. The analysis results show the main mechanism of chemical adsorption for inhibiting adsorption with iodization is that the ultrafine gold particles reduced on quartz surface form a coordination complex in the pulp systems, which are dissolved by iodization.
- 25 June 2019
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 43 (10) , 1151-1161
Study on the adsorption mechanisms of gold chloride on the surface of fine quartz
The fine quartz was mixed with gold chloride solution to perform stirring contrast experiment under the condition of with and without iodization. Experimental factors were studied in order to gain the best inhibitory effect of iodization about adsorption effect of quartz on gold chloride, including gold solution concentration, stirring speed, stirring time, and KI-I2 dosage. Adsorption property of quartz on gold chloride was obtained by fitting and calculation of adsorption models. On the basis, the adsorption mechanism of quartz on gold chloride is revealed. Experimental results show that adsorbed amount without iodization is higher than with iodization, which is restrained by iodization. The best condition restrained adsorption is gold chloride of 100 mg/L, stirring speed of 500 r/min, stirring time of 8 min under condition of pH = 6 and 10% pulp density, and the best KI-I2 dosage are C(KI) = 2.5g/L and C(I2) = 2g/L. The fitting and calculation of adsorption models demonstrate that the adsorption of quartz on gold chloride contains favorable chemical adsorption in addition to physical adsorption. The analysis results show the main mechanism of chemical adsorption for inhibiting adsorption with iodization is that the ultrafine gold particles reduced on quartz surface form a coordination complex in the pulp systems, which are dissolved by iodization.
- Open Access
- 6 April 2016
- Published by Wiley in Journal of Nanomaterials
- Vol. 2016, 1-8
Impact of Precipitants on the Structure and Properties of Fe-Co-Ce Composite Catalysts
Fe-Co-Ce composite catalysts were prepared by coprecipitation method using CO(NH2)2, NaOH, NH4HCO3, and NH3·H2O as precipitant agents. The effects of the precipitant agents on the physicochemical properties of the Fe-Co-Ce based catalysts were investigated by SEM, TEM, BET, TG-DTA, and XRD. It was found that the precipitant agents remarkably influenced the morphology and particle size of the catalysts and affected the COD removal efficiency, decolorization rate, and pH of methyl orange for catalytic wet air oxidation (CWAO). The specific surface area of the Fe-Co-Ce composite catalysts successively decreased in the order of NH3·H2O, NH4HCO3, NaOH, and CO(NH2)2, which correlated to an increasing particle size that increased for each catalyst. For the CWAO of a methyl orange aqueous solutions, the effects of precipitant agents NH3·H2O and NaOH were superior to those of CO(NH2)2and NH4HCO3. The catalyst prepared using NH3·H2O as the precipitant agent was mostly composed of Fe2O3, CoO, and CeO2. The COD removal efficiency of methyl orange aqueous solution for NH3·H2O reached 92.9% in the catalytic wet air oxidation. Such a catalytic property was maintained for six runs.
- 6 April 2016
- Published by Wiley in Journal of Nanomaterials
- Vol. 2016, 1-8
Open AccessImpact of Precipitants on the Structure and Properties of Fe-Co-Ce Composite Catalysts
Fe-Co-Ce composite catalysts were prepared by coprecipitation method using CO(NH2)2, NaOH, NH4HCO3, and NH3·H2O as precipitant agents. The effects of the precipitant agents on the physicochemical properties of the Fe-Co-Ce based catalysts were investigated by SEM, TEM, BET, TG-DTA, and XRD. It was found that the precipitant agents remarkably influenced the morphology and particle size of the catalysts and affected the COD removal efficiency, decolorization rate, and pH of methyl orange for catalytic wet air oxidation (CWAO). The specific surface area of the Fe-Co-Ce composite catalysts successively decreased in the order of NH3·H2O, NH4HCO3, NaOH, and CO(NH2)2, which correlated to an increasing particle size that increased for each catalyst. For the CWAO of a methyl orange aqueous solutions, the effects of precipitant agents NH3·H2O and NaOH were superior to those of CO(NH2)2and NH4HCO3. The catalyst prepared using NH3·H2O as the precipitant agent was mostly composed of Fe2O3, CoO, and CeO2. The COD removal efficiency of methyl orange aqueous solution for NH3·H2O reached 92.9% in the catalytic wet air oxidation. Such a catalytic property was maintained for six runs.