DWDianlong Wang

Dianlong Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dianlong Wang has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Precision Manufacturing in China of Replication Mandrels for Ni-Based Monolithic Wolter-I X-ray Mirror Mandrels

    by Jiadai Xue, Bo Wang, Qiuyan Liao, Kaiji Wu, Yutao Liu, Yangong Wu, Wentao Chen, Zheng Qiao, Yuan Jin, Fei Ding, et al.

    The X-ray satellite “Einstein Probe” of the Chinese Academy of Sciences (CAS) was successfully launched on 9 January 2024 at 15:03 Beijing Time from the Xichang Satellite Launch Center in China with a “Long March-2C” rocket. The Einstein Probe is equipped with two scientific X-ray telescopes. One is the Wide-field X-ray Telescope (WXT), which uses lobster-eye optics. The other is the Follow-up X-ray Telescope (FXT), a Wolter-I type telescope. These telescopes are designed to study the universe for high-energy X-rays associated with transient high-energy phenomena. The FXT consists of two modules based on 54 thin X-ray Wolter-I grazing incidence Ni-replicated mirrors produced by the Italian Media Lario company, as contributions from the European Space Agency and the Max Planck Institute for Extraterrestrial Physics (MPE), which also provided the focal-plane detectors. Meanwhile, the Institute of High Energy Physics (IHEP), together with the Harbin Institute of Technology and Xi’an Institute of Optics and Precision Mechanics, has also completed the development and production of the structural and thermal model (STM), qualification model (QM) and flight model (FM) of FXT mirrors for the Einstein Probe (EP) satellites for demonstration purposes. This paper introduces the precision manufacturing adopted in China of Wolter-I X-ray mirror mandrels similar to those used for the EP-FXT payload. Moreover, the adopted electroformed nickel replication process, based on a chemical nickel–phosphorus alloy, is reported. The final results show that the surface of the produced mandrels after demolding and the internal surface of the mirrors have been super polished to the roughness level better than 0.3 nm RMS and the surface accuracy is better than 0.2 μm, and the mirror angular resolution for single mirror shells may be as good as 17.3 arcsec HPD (Half Power Diameter), 198 arcsec W90 (90% Energy Width) @1.49 keV (Al-K line). These results demonstrate the reliability and advancement of the process. As the first efficient X-ray-focusing optics manufacturing chain established in China, we successfully developed the first focusing mirror prototype that could be used for future X-ray satellite payloads.


  • Interfacial and Electronic Modulation via Localized Sulfurization for Boosting Lithium Storage Kinetics

    by Tingting Ruan, Bo Wang, Yubo Yang, Xu Zhang, Rensheng Song, Yu Ning, Zhenbo Wang, Haijun Yu, Yu Zhou, Dianlong Wang, et al.

    Structural modulation endows electrochemical hybrids with promising energy storage properties owing to their adjustable interfacial and/or electronic characteristics. For MXene‐based materials, however, the facile but effective strategies for tuning their structural properties at nanoscale are still lacking. Herein, 3D crumpled S‐functionalized Ti3C2Tx substrate is rationally integrated with Fe3O4/FeS heterostructures via coprecipitation and subsequent partial sulfurization to induce a highly active and stable electrode architecture. The unique heterostructures with tuned electronic properties can induce improved kinetics and structural stability. The surface engineering by S terminations on the MXene further unlocks extra (pseudo)capacitive lithium storage. Serving as anode for lithium storage, the optimized electrode delivers an excellent long‐term cycling stability (913.9 mAh g−1 after 1000 cycles at 1 A g−1) and superior rate capability (490.4 mAh g−1 at 10 A g−1). Moreover, the (de)lithiation pathways associated with energy storage mechanisms are further revealed by operando X‐ray diffraction, in situ electroanalytical techniques, and first‐principles calculations. The hybrid electrode is proved to undergo stepwise phase transformations during discharging but a relatively uniform reconversion during charging, suggesting an asymmetric conversion mechanism. This work provides a novel strategy for designing high‐performance hybrids and paves the way for in‐depth understanding of complex lithium intercalation and conversion reactions.


  • Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium‐Ion Electrode Densities

    by Tiefeng Liu, Chuan‐Jia Tong, Bo Wang, Li‐Min Liu, Shanqing Zhang, Zhan Lin, Dianlong Wang, Jun Lu

    The use of electrode additives such as binder and conductive additive (CA) in addition to high pore volume for electrolytes, results in reduced volumetric energy densities of all battery electrodes. In this work, it is proposed to use poly(furfuryl alcohol) (PFA) conductive resin as a trifunctional electrode additive to replace polyvinylidene fluoride (PVDF) and CA while simultaneously enabling low porosity electrode function. The resultant PFA binder has a long‐range ordered structure of conjugated diene, which allow electronic conductivity that leads to a CA‐free electrode fabrication process. The oxygen heteroatoms in the PFA structure reduce the diffusion barriers of lithium ions, lowers the amount of required electrolyte/pore volume and thus, increasing electrode density. Serving as a trifunctional electrode additive, a high electrode density of 2.65 g cm−3 of the LiFePO4 (LFP) electrode and therefore the highest volumetric energy density of 1551 Wh L−1 so far. The LFP electrode using PFA binder can achieve a capacity retention of ≈80% and Coulombic efficiency of over 99.9% after cycling for 500 times. The proposed in situ polymerization strategy could revolutionize the electrode process, with the advantages of being simple, environmentally friendly, and easily scalable to industrial applications.


  • Measuration of Nanometer Grain Content for Complex Material by Spectrophotometric Method

    by Dianlong Wang, Changsong Dai, Tingfeng Yi, Yong Zhang, Changsheng Zhang, Dezhi Sun

    The relation of direct proportion between absorbance and nanometer grain content is educed by analysing the extinction law which the monochromatic light passes turbid solution of nanometer grain. The feasibility mensurating nanometer grain content for complex material by spectrophotometric method is verified according to the composite deposit of Ni-P/alpha-Al2O3 (30nm). The results show that the standard curve of relation between the concentration of turbid solution of nanometer grain and absorbance is a straight line, and the linear correlative degree of the data reaches 99.96%. The measuring condition which the incident light wave is 500nm, and the concentration range of alpha-Al2O3 is 8-40mgmiddotL-1 is determined; moreover, the effect of ultrasonic wave dispersion on absorbency of nanometer particle is also studied. So it offers a better method to mensurate nanometer grain content for complex material