Jin Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jin Wu has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
Lilun Xu
Air‐Sea Interaction Laboratory, Graduate College of Marine Studies University of Delaware Lewes Delaware USA
1 shared publicationPeter M. Kalvoda
Air‐Sea Interaction Laboratory, Graduate College of Marine Studies University of Delaware Lewes Delaware USA
1 shared publication
Latest Publications
- 28 June 2003
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Oceans
- Vol. 108 (C6)
Macrobubble clouds produced by breaking wind waves: A laboratory study
Clouds of large air bubbles produced by breaking wind waves have been studied in a laboratory tank. Temporal evolutions of these macrobubble clouds, including their length scales, aspect ratios, area scales, and velocities, are presented; the bubble concentration and void ratio within the cloud are also found. The initial downwind velocity of the cloud is about one half, but can reach about two thirds, the phase velocity of the breaking wave. The maximum penetrating depth of the cloud is about one half the breaking wave height. All these geometric and kinematic characteristics of the cloud are also associated with those of the breaking wave.
- 28 June 2003
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Oceans
- Vol. 108 (C6)
Macrobubble clouds produced by breaking wind waves: A laboratory study
Clouds of large air bubbles produced by breaking wind waves have been studied in a laboratory tank. Temporal evolutions of these macrobubble clouds, including their length scales, aspect ratios, area scales, and velocities, are presented; the bubble concentration and void ratio within the cloud are also found. The initial downwind velocity of the cloud is about one half, but can reach about two thirds, the phase velocity of the breaking wave. The maximum penetrating depth of the cloud is about one half the breaking wave height. All these geometric and kinematic characteristics of the cloud are also associated with those of the breaking wave.
- Open Access
- 1 November 2002
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 32 (11) , 3286-3290
Jet Drops Produced by Bubbles Bursting at the Surface of Seawater
Several empirical formulas were reported to describe the production of jet drops by bubbles bursting at the surface of seawater; they were, however, based on scanty data. Recent observations of Spiel have provided new data for intermediate-size bubbles; his results are further quantified here, aiming for their extrapolations to both small and large bubbles. A greater number of jet drops are shown to be produced by smaller bubbles; the production follows a combined exponential and linear decline for larger bubbles, rather than the exponential or linear decline proposed earlier. The largest number of jet drops produced by the smallest bubble may not exceed seven. The largest bubble that can produce jet drops may not exceed about 1.7 mm, a radius somewhat smaller than the analytical value. The ratio between the radius of jet drops and that of their parent bubble is always greater than the oft-quoted 1-to-10 value; it approaches a minimum value of 0.110 for zero bubble radius and reaches a maximum value of 0.147 for bubbles having a radius larger than 0.8 mm.
- 1 November 2002
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 32 (11) , 3286-3290
Open AccessJet Drops Produced by Bubbles Bursting at the Surface of Seawater
Several empirical formulas were reported to describe the production of jet drops by bubbles bursting at the surface of seawater; they were, however, based on scanty data. Recent observations of Spiel have provided new data for intermediate-size bubbles; his results are further quantified here, aiming for their extrapolations to both small and large bubbles. A greater number of jet drops are shown to be produced by smaller bubbles; the production follows a combined exponential and linear decline for larger bubbles, rather than the exponential or linear decline proposed earlier. The largest number of jet drops produced by the smallest bubble may not exceed seven. The largest bubble that can produce jet drops may not exceed about 1.7 mm, a radius somewhat smaller than the analytical value. The ratio between the radius of jet drops and that of their parent bubble is always greater than the oft-quoted 1-to-10 value; it approaches a minimum value of 0.110 for zero bubble radius and reaches a maximum value of 0.147 for bubbles having a radius larger than 0.8 mm.
- Open Access
- 1 April 2002
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 32 (4) , 1265-1267
Reply*
- 1 April 2002
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 32 (4) , 1265-1267
Open AccessReply*
- 1 November 2001
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 31 (11) , 3249-3257
Production Functions of Film Drops by Bursting Bubbles
Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant.
- 1 November 2001
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 31 (11) , 3249-3257
Production Functions of Film Drops by Bursting Bubbles
Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant.
- Open Access
- 1 November 2001
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 31 (11) , 3249-3257
Production Functions of Film Drops by Bursting Bubbles
Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant. Abstract Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant.
- 1 November 2001
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 31 (11) , 3249-3257
Open AccessProduction Functions of Film Drops by Bursting Bubbles
Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant. Abstract Experimental results of Blanchard and Syzdek and of Resch and Afeti on the production of film drops by bubbles bursting at the surface of seawater were parameterized earlier by Wu. More recently, comprehensive observations have been carried out by Spiel. All these measurements, covering different size ranges of film drops, are shown to quantitatively complement each other. Through combining these results, the production of film drops has been quantified, in terms of both number and size distribution, over the entire radius range 0.01–250 μm. The average size of film drops is about 25 μm in radius, which is much larger than the commonly cited radius for film drops of 5 μm. In addition, all the results are shown to follow a simple rule; that is, the ratio between the total surface area of film drops and the surface area of their parent bubble is a constant.
- Open Access
- 1 July 2000
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 30 (7) , 1809-1813
Bubbles Produced by Breaking Waves in Fresh and Salt Waters
A greater volume of air is entrained by breaking waves to produce many more bubbles in salt, than in fresh, water. There are, however, little differences in their sizes. These results are consistent with reported observations of whitecaps over freshwater lakes and the ocean.
- 1 July 2000
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 30 (7) , 1809-1813
Open AccessBubbles Produced by Breaking Waves in Fresh and Salt Waters
A greater volume of air is entrained by breaking waves to produce many more bubbles in salt, than in fresh, water. There are, however, little differences in their sizes. These results are consistent with reported observations of whitecaps over freshwater lakes and the ocean.
- 1 January 2000
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 30 (1) , 195-200
Concentrations of Sea-Spray Droplets at Various Wind Velocities: Separating Productions through Bubble Bursting and Wind Tearing
There are two sets of comprehensive measurements of sea spray: de Leeuw and Smith et al. Their data are interpreted to describe similar productions of film and jet drops by bursting bubbles. For measurements of Smith et al., those droplets associated with the second peak at large sizes of the production spectrum are shown to be spume drops generated by the wind tearing of wave crests. Together with physical understanding, representations of field data are deduced for film and jet drops and are discussed for spume drops.
- 1 January 2000
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 30 (1) , 195-200
Concentrations of Sea-Spray Droplets at Various Wind Velocities: Separating Productions through Bubble Bursting and Wind Tearing
There are two sets of comprehensive measurements of sea spray: de Leeuw and Smith et al. Their data are interpreted to describe similar productions of film and jet drops by bursting bubbles. For measurements of Smith et al., those droplets associated with the second peak at large sizes of the production spectrum are shown to be spume drops generated by the wind tearing of wave crests. Together with physical understanding, representations of field data are deduced for film and jet drops and are discussed for spume drops.
- Open Access
- 1 March 1999
- Published by American Meteorological Society in Journal of Atmospheric and Oceanic Technology
- Vol. 16 (3) , 373-378
On Wave Dependency of Altimeter Sea Returns—Weak Fetch Influence on Short Ocean Waves
At low and intermediate winds, altimeter returns are from ocean waves having their length longer than the radar wavelength. These waves, mainly ripples, are generated and modified by wind stress and dominant ocean waves. The wind stress coefficient is greater with steeper dominant waves prevailing at shorter fetches, and the attenuation of ripples is also stronger with steeper dominant waves. The combined influence of dominant waves on the altimeter wind algorithm is shown to be small as a result of these compensatory effects at short fetches, with an intensified generation by the augmented wind stress and an escalated suppression by steeper dominant waves. Abstract At low and intermediate winds, altimeter returns are from ocean waves having their length longer than the radar wavelength. These waves, mainly ripples, are generated and modified by wind stress and dominant ocean waves. The wind stress coefficient is greater with steeper dominant waves prevailing at shorter fetches, and the attenuation of ripples is also stronger with steeper dominant waves. The combined influence of dominant waves on the altimeter wind algorithm is shown to be small as a result of these compensatory effects at short fetches, with an intensified generation by the augmented wind stress and an escalated suppression by steeper dominant waves.
- 1 March 1999
- Published by American Meteorological Society in Journal of Atmospheric and Oceanic Technology
- Vol. 16 (3) , 373-378
Open AccessOn Wave Dependency of Altimeter Sea Returns—Weak Fetch Influence on Short Ocean Waves
At low and intermediate winds, altimeter returns are from ocean waves having their length longer than the radar wavelength. These waves, mainly ripples, are generated and modified by wind stress and dominant ocean waves. The wind stress coefficient is greater with steeper dominant waves prevailing at shorter fetches, and the attenuation of ripples is also stronger with steeper dominant waves. The combined influence of dominant waves on the altimeter wind algorithm is shown to be small as a result of these compensatory effects at short fetches, with an intensified generation by the augmented wind stress and an escalated suppression by steeper dominant waves. Abstract At low and intermediate winds, altimeter returns are from ocean waves having their length longer than the radar wavelength. These waves, mainly ripples, are generated and modified by wind stress and dominant ocean waves. The wind stress coefficient is greater with steeper dominant waves prevailing at shorter fetches, and the attenuation of ripples is also stronger with steeper dominant waves. The combined influence of dominant waves on the altimeter wind algorithm is shown to be small as a result of these compensatory effects at short fetches, with an intensified generation by the augmented wind stress and an escalated suppression by steeper dominant waves.
- Open Access
- 1 August 1998
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 28 (8) , 1646
Reply
- 1 August 1998
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 28 (8) , 1646
Open AccessReply