JHJames W. Head

James W. Head

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


James W. Head has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sulfates on Mars: A Pyroclastic Airfall Model for the Origin and Emplacement of Valles Marineris Interior Layered Deposits (ILD).

    by James Head, Lionel Wilson

    Sulfur is transported to the surface and released in  volcanic effusive and explosive eruptions and is known to be concentrated in both time (acidic aqueous alteration environments in Late Noachian-Early Hesperian) and space (e.g., Valles Marineris-type layered deposits). Requirements necessary for formation, evolution and preservation of sulfates are highly specific due to high sulfate solubility and environmental sensitivity of sulfates to phase transitions (temperature and humidity). Can explosive volcanic eruptions under martian conditions help account for the characteristics of sulfate units in the Valles Marineris Interior Layered Deposits (VM-ILD)?As a basis for understanding the nature of volcanic eruptions in the martian environment (e.g., low gravity, currently low and historically evolving atmospheric pressure) we developed a theoretical and predictive framework for the generation, ascent and eruption of magma. We have: 1) shown that basaltic plinian eruptions are highly favored (relative to Earth), 2) explored the characteristics/dispersal of tephra/gases in various locations and Patm conditions, and 3) assessed the behavior/fate of S species during eruptions including the role of sulfuric acid precipitates in surface melting and creation of aqueous acidic environments.Observations consistent with volcanic eruptions under martian conditions accounting for characteristics of units in the VM-ILD include: 1) Volcanism is focused in Tharsis; 2) Explosive plinian basaltic volcanism is favored in general, and with increasing altitude (Tharsis) and decreasing Patm (time); 3) Finer ash is produced relative to Earth, enhancing dispersal; 4) Fine ash creates a profusion of nucleation sites for condensation of co-erupted water and S species; 5) Airfall products are tephra coated with condensed water and S species, producing extensive layered/graded deposits; 6) Tephra distribution is latitudinal (equatorial for Tharsis sources); 7) Temperatures of deposited tephra decrease with distance from vent; 8) Magmatic exsolution of sulfur is favored by lower Patm and enhanced by higher altitude eruption sites (Tharsis); 9) Sulfur speciation and atmospheric chemistry predictions favor sulfuric acid formation and widespread dispersal during and immediately following eruptions; 10) Condensation and ensuing precipitation of sulfuric acid is predicted to melt any existing surface snow and ice, and to provide acidic aqueous surface environments favoring sulfate precipitation; 11) Estimates of eruption duration and continuity readily predict km-thick accumulations; 12) Fluctuating eruption conditions and S speciation can lead to interbedding of phyllosilicates and sulfates. Explosive volcanism in the Tharsis region appears to meet the necessary requirements for the formation, evolution and preservation of sulfates in the VM-ILD, including: 1) sources of sulfur; 2) sources of liquid water; 3) cold climates; 4) resulting acidic environments (sulfur concentration in aqueous solutions); 5) mechanism to collect S-rich waters and then to evaporate water and concentrate/deposit sulfates; 6) varying climate conditions to permit observed interbedding of phyllosilicates and sulfates; 7) Tharsis environment accounts for concentration in certain locations; and 8) subsequent dry and cold climatic conditions preserve ancient sulfates to the present.  To test this model we are compiling predictive tephra/volatile dispersal stratigraphies to compare to the detailed characteristics/trends observed in the Valles Marineris ILDs.


  • Transition from complex craters to multi‐ringed basins on terrestrial planetary bodies: Scale‐dependent role of the expanding melt cavity and progressive interaction with the displaced zone

    by J. W. Head

    The observed differences between complex craters and multi‐ringed basins are described and a combined “transient cavity/displaced zone/melt cavity” model is explored to account for the observations. In this “nested melt‐cavity model”, the increasing influence of the percentage of the target undergoing impact melting at the sub‐impact point with increasing size (the differential melt scaling of Cintala and Grieve [1998]) causes fundamental changes in the nature of the transient cavity, its relationship to the displaced zone, and its short‐term collapse behavior. The transition from complex craters to two‐ring basins involves expansion of the melting front into the displaced zone, formation of a two‐component excavation cavity, and a concomitant radial expansion outward of the zone of maximum elastic rebound. The short‐term modification stage is then dominated by the strength differences between the fluid melt in the inner cavity and rocks of the displaced zone; the highly shocked rocks at the outer margin of the expanded parabolic melting front rebound to form the expanded peak ring, moving upward and laterally inward, easily displacing fluid melt filling the inner depression. At larger sizes, differential melt scaling causes the peak ring diameter to expand relatively more rapidly than the basin rim, and upon collapse, the increased volume of melt ponds in the rebounded melt cavity inside the expanding peak ring. As the transient melt cavity further increases proportionally in size, it penetrates through the base of the displaced zone with significant consequences. The resulting modification stage now incorporates into the collapse process inward and upward movement along the base of the displaced zone; listric failure occurs inward into the fluid melt cavity beginning at the edge of the melt cavity and extending out along the base of the displaced zone up to the base of the rim structural uplift (at ∼1.5 crater radii). This forms an additional outer ring and a resulting megaterrace, modifying the radial ejecta on the collapsed rim to form a domical facies. At multi‐ring basin scales, the significantly deeper penetration that occurs in the expanding melt cavity accounts for the maximum crustal thickness decrease that occurs inside the peak ring in the final basin. Early onset and higher density of peak ring basins on Mercury is predicted by higher mean impact velocity and differential melt scaling.


  • Ring‐mold craters in lineated valley fill and lobate debris aprons on Mars: Evidence for subsurface glacial ice

    by Ailish M. Kress, James W. Head

    Ring‐mold craters (RMCs), concentric crater forms shaped like a truncated torus and named for their similarity to the cooking implement, are abundant in lobate debris aprons (LDA) and lineated valley fill (LVF) in the northern mid‐latitudes on Mars, but are not seen in surrounding terrain. LDA and LVF have been interpreted to form by flow of debris, but uncertainty remains concerning the mechanism of flow, with hypotheses ranging from pore‐ice‐assisted creep of talus to debris‐covered glaciers. RMCs average less than a few hundred meters in diameter and occur in association with normal bowl‐shaped impact craters whose average diameters are commonly less than RMCs. On the basis of their morphologic similarities to laboratory impact craters formed in ice and the physics of impact cratering into layered material, we interpret the unusual morphology of RMCs to be the result of impact into a relatively pure ice substrate below a thin regolith, with strength‐contrast properties, spallation, viscous flow and sublimation being factors in the development of the ring‐mold shape. Associated smaller bowl‐shaped craters are interpreted to have formed within a layer of regolith‐like sublimation till overlying the ice substrate. Estimates of crater depths of excavation between populations of bowl‐shaped and ring‐mold craters suggest that the debris layer is relatively thin. These results support the hypothesis that LDA and LVF formed as debris‐covered glaciers and predict that many hundreds of meters of ice remain today in LDA and LVF deposits, beneath a veneer of sublimation till. RMCs can be used in other parts of Mars to predict and assess the presence of ancient ice‐related deposits.


  • Volcanism on Mercury: A new model for the history of magma ascent and eruption

    by Lionel Wilson, James W. Head

    We use the identification of volcanism on Mercury, together with lobate, flow‐front like topography, crustal composition information and data on the stress state and history of the lithosphere, to derive a new model for the ascent and eruption of magma on Mercury. We find that extrusion is likely to be dominated by high‐effusion rate events. Initial emplacement of dikes in the crust and extrusions to the surface will result in a denser crust, favoring even more extrusive volcanism. This will be followed by cooling associated with planetary thermal evolution that will rapidly decrease the ability of magma to reach the surface, resulting in a decline and termination of volcanism following the emplacement and deformation of regional smooth plains. These predictions and the resulting history can be tested with observations from missions to Mercury.


  • Fluvial sedimentary deposits on Mars: Ancient deltas in a crater lake in the Nili Fossae region

    by Caleb I. Fassett, James W. Head

    New spacecraft observations in the Nili Fossae region of Mars reveal two valley networks (∼80 and ∼200 km long) that each formed distributary fans as they entered an ancient 40‐km diameter impact crater. An outlet channel on the eastern crater rim, lying at an elevation above the fans, suggests these fans formed as subaqueous deltas in a crater lake. Water flowing in the valley networks entered the crater and deposited the fans, and ponded to a maximum depth of about 450 m. The lake then overtopped and breached the crater rim, incising it and dropping the lake level by ∼100 m. Geological evidence, combined with the volume of water necessary to fill the crater, suggests the duration of flow through this system was prolonged. The existence of the deposits described here implies that the early Martian environment supported overland flow and ponding of water for an extended period of time.


  • Origin and evolution of a cold‐based tropical mountain glacier on Mars: The Pavonis Mons fan‐shaped deposit

    by David E. Shean, James W. Head, David R. Marchant

    Each of the large Tharsis Montes volcanoes in the equatorial region of Mars has an unusual Amazonian‐aged fan‐shaped deposit on its west‐northwestern flank. On the basis of Viking Orbiter data, the origin of these deposits has been variously ascribed to volcanic, mass‐wasting, tectonic, and glacial processes. Using new MGS and Odyssey data, combined with recent developments in the study of cold‐based glaciers, we reassess the geology and mode of origin for these deposits with particular emphasis on Pavonis Mons. The deposits share three characteristic facies, including (1) a ridged facies, consisting of tens to >100 parallel, concentric ridges around the margins of the deposits, (2) a knobby facies composed of irregular hills and hummocks, and (3) a smooth facies of broad, lobate plains that superposes all other units within the deposits. On the basis of morphology, topography, superposition relationships, and close terrestrial analogs in the Dry Valleys of Antarctica, we interpret the Pavonis fan‐shaped deposit as the depositional remains of a cold‐based glacier that formed on the northwestern flank in recent Martian history. We interpret the ridged facies as drop moraines formed around the margins of a retreating cold‐based glacier, the knobby facies as a sublimation till derived from in situ down‐wasting of cold‐based glacial ice, and the smooth facies as extant debris‐covered glacial ice. In addition to the three main facies, the fan‐shaped deposit at Pavonis Mons contains several unique features, including arcuate scarps, high‐relief flow‐like features, and radial ridges, which suggest that volcanism played a role during its formation. Using recent results from Mars general circulation model simulations, we outline a model of glacier formation involving atmospheric deposition of water ice on the northwestern flanks of the Tharsis Montes during periods of high mean obliquity. Reconstructed ice sheet profiles for each of the Tharsis Montes glaciers suggest that the ice sheets attained average thicknesses of ∼1.6–2.4 km, values that are consistent with a cold‐based glacial origin. Analysis of crater size‐frequency distributions using new data indicates that the age of the glaciation lies within the Late Amazonian (∼10–200 Ma). Thus our results suggest that multiple phases of tropical mountain glaciation occurred on Mars within the past few hundred Myr and that significant amounts of near‐surface, equatorial ice may remain within the deposit today.


  • North polar cap of Mars: Polar layered deposit characterization and identification of a fundamental climate signal

    by Sarah M. Milkovich, James W. Head

    The record of recent climate change on Mars is encoded in the polar layered deposits within the north polar cap. Individual Mars Orbiter Camera (MOC) images of exposed layer sequences in cliffs and troughs provide the equivalent of high resolution “cores” through many sections in the upper part of the north polar layered terrain. In order to decode this record it is necessary 1) to quantitatively characterize the layers in individual “cores” and 2) to assess possible correlations between “cores” in vertical layered deposit sequences across the cap. We use two techniques commonly employed in paleoceanography for the study of deep‐sea sediment cores on Earth to establish the characteristics of layers in individual cores (Fourier analysis) and to determine the correlation between cores (curve‐shape matching algorithms). Application to “cores” (vertical sections) of the north polar layered terrain on Mars reveals several fundamental properties of north polar cap stratigraphy: 1) Fourier analysis of the layer vertical sequences reveals a characteristic and repetitive wavelength of ∼30 m thickness throughout the upper part (Zone 1) of all sequences analyzed. 2) Application of curve‐shape matching algorithms demonstrates that layers correlate across at least three quarters of the cap (∼6 × 105 km2) in the 13 images analyzed to date. 3) Assessment of geometric relationships shows that layers are not horizontal, but rather have an apparent dip of approximately 0.5 degrees. We interpret these results as follows: 1) The fundamental ∼30 m signal is interpreted as a climate signal that may correspond to a 51 kyr insolation cycle. 2) The lateral correlation and broad distribution of these layer sequences strongly imply that layer accumulation processes are widespread across the cap, rather than confined within a single trough or region. 3) Local to regional variability in individual layer thicknesses (and thus accumulation and sublimation rates) is typically less than a factor of 2.5, providing the ability to study regional trends, but often making it difficult to correlate visually the vertical sequences in individual cores. Finally, initial examination of layers located deeper in the stratigraphic sequence within the north polar cap than the ∼300 m thick Zone 1 provides evidence for a unit less than 100 m thick (Zone 2) in which the fundamental ∼30 m sequence is not detected. We interpret this as a deposit having formed during a recent high‐obliquity phase of Mars, during which time polar volatiles underwent mobilization and were transport equatorward, leaving a polar lag of dust‐rich material. The most recent “ice age” (∼0.5–2 Ma) offers a plausible candidate for this period of ice cap removal and lag deposit formation. An underlying Zone 3 (∼200 m) contains a dominant 35 m signal, and a lowermost Zone 4 (∼200 m) contains multiple signals but no dominant one. Together these four zones represent ∼800 m of vertical stratigraphic section, about one‐fourth of the total thickness of the cap. These findings support earlier interpretations that orbital parameter variations could cause significant erosion and possibly complete removal of the polar caps. The interpreted crater retention ages of the layered terrain are consistent with the correlations and vertical sequences described here, suggesting that the polar caps wax and wane throughout geological history, depending on the evolution of orbital parameters. Definition of the ∼30 m unit signal holds promise for determining 1) the detailed origin of individual layer types, 2) the nature of deposition and sublimation processes and their relation to insolation geometry across the polar cap, and 3) correlation with and comparison to the south polar layered terrain record.


  • Impact crater air fall deposits on the surface of Venus: Areal distribution, estimated thickness, recognition in surface panoramas, and implications for provenance of sampled surface materials

    by A. T. Basilevsky, J. W. Head, A. M. Abdrakhimov

    During their formation, impact craters on Venus larger than 11 km in diameter acquired parabolic features composed of air fall deposits that are radar‐dark in Magellan synthetic aperture radar images. A model of the parabola planimetric shape and size (the latter being a function of crater diameter) was constructed from the data of Campbell et al. [1992]. Reconstructing model parabolas around all impact craters with D > 11 km in the regions of the Venera‐Vega sites revealed that parabolas cover 80–90% of the surface. These regions are representative of the majority of the Venus surface in terms of general geology and impact crater abundance. This implies that a very significant part of the surface of Venus was covered at least once with parabola deposits, and thus it is logical to look for them in the TV panoramas of the Venus surface taken by the Venera landers. These panoramas show the presence of soil and layered rocks, with the rocks (shown by the data of several instruments) consisting of porous, mechanically weak material, implying an altered or sedimentary (in a broad sense, including volcanic tuffs and impact deposits) nature. We propose the hypothesis that (1) the layered rocks may be the partly lithified and then partially eroded parabola deposits, while (2) the soil may partly be unlithified crater deposits and partly a product of the degradation of layered rocks. If this hypothesis is correct, then the interpretations related to the provenance of the materials studied geochemically by the landers may need revision. In particular, it is very possible that deep‐seated (>1–3 km) rocks (the lower units of the regional plains complex, rocks of the plains basement, and plutonic rocks) are a part (perhaps significant) of the material analyzed by the landers. The possible presence of this deeply derived material should also be taken into account in selecting landing sites for future missions to Venus.