Walter Hu

Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies

Here we report theoretical and experimental results for a high-Q cavity based on nanoimprinted perovskite film. We reveal that bound state in the continuum transformed into a resonant state due to leakage into substrate leads to significant enhancement of the photoluminescence signal of the perovskite cavity.

Recently, solution-processed hybrid halide perovskite has emerged as promising materials for advanced optoelectronic devices such as photovoltaics, photodetectors, light emitting diodes and lasers. In the mean time, all-dielectric metasurfaces with high-index materials have attracted attention due to their low-loss and high-efficient optical resonances. Because of its tunable by composition band gap in the visible frequencies, organolead halide perovskite could serve as a powerful platform for realizing high-index, low-loss metasurfaces. However, direct patterning of perovskite by lithography-based technique is not feasible due to material instability under moisture. Here we report novel organolead halide perovskite metasurfaces created by the cost-effective thermal nanoimprint technology. The nanoimprinted perovskite metasurface showed improved surface morphology and enhanced optical absorption properties. Significantly enhanced optical emission with an eight-fold enhancement in photoluminescence (PL) intensity was observed under room temperature. Temperature-dependent PL of perovskite nanograting metasurface was also investigated. Based on our results, we believe that thermal nanoimprint is a simple and cost-effective technique to fabricate perovskite-based metasurfaces, which could have broad impact on optoelectronic and photonic applications.

The biological surface has developed functional structures during long-term evolution, which inspires the development of biomimic materials for optical and optoelectronic applications. For example, the micropapillae and nanofolding structures of rose petals could enhance light absorption and color saturation. Here, the authors report a successful replication of rose hierarchical surface structures by simple and cost-effective processes. A variety of rose structured surfaces were investigated, which confirmed the diversity of functional surface architecture. The polydimethylsiloxane (PDMS) negative replica was formed by casting PDMS solution on top of a rose petal followed by a temperature-assisted curing process. The hierarchical structure was further transferred into photoresist films by ultraviolet nanoimprint using the PDMS replica as molds. The imprinted photoresist films demonstrated uniform replications of rose microconvex cells with nanofolding details in the scale of a square centimeter. Super-hydrophobicity was demonstrated on both PDMS negative replica and photoresist positive replica. The incorporation of photoresist replica on the surface of photodetectors improved the responsivity by 35% to 42% due to enhanced light management effect. This bio-inspired transfer imprint process with PDMS provided a high-fidelity and cost-effective method to reproduce functional structures from biological surfaces. This study also demonstrated the potential of utilizing rose structures in photovoltaic and optoelectronic applications.

We model and simulate the use of ion sensitive field-effect transistor for electronic deoxyribonucleic acid (DNA) sequencing using its intrinsic molecular charge on the backbone. In this model, biological layer is treated as an ion-permeable charged membrane in solving Poisson equation. Sensor I-V characteristics are simulated, showing that the shifts of device threshold voltage respond to the DNA base-extension reaction. The simulation reveals the effects of DNA surface density, the length of a single-stranded DNA, and salt concentration on sensor performance. The simulation results demonstrate good agreement with the published experimental data, therefore, could be a good guide to actual biosensor design and fabrication.

Recently, organolead halide-based perovskites have emerged as promising materials for optoelectronic applications, particularly for photovoltaics, photodetectors, and lasing, with low cost and high performance. Meanwhile, nanoscale photodetectors have attracted tremendous attention toward realizing miniaturized optoelectronic systems, as they offer high sensitivity, ultrafast response, and the capability to detect beyond the diffraction limit. Here we report high-performance nanoscale-patterned perovskite photodetectors implemented by nanoimprint lithography (NIL). The spin-coated lead methylammonium triiodide perovskite shows improved crystallinity and optical properties after NIL. The nanoimprinted metal–semiconductor–metal photodetectors demonstrate significantly improved performance compared to the nonimprinted conventional thin-film devices. The effects of NIL pattern geometries on the optoelectronic characteristics were studied, and the nanograting pattern based photodetectors demonstrated the best performance, showing approximately 35 times improvement on responsivity and 7 times improvement on on/off ratio compared with the nonimprinted devices. The high performance of NIL-nanograting photodetectors likely results from high crystallinity and favored nanostructure morphology, which contribute to higher mobility, longer diffusion length, and better photon absorption. Our results have demonstrated that the NIL is a cost-effective method to fabricate high-performance perovskite nanoscale optoelectronic devices, which may be suitable for manufacturing of high-density perovskite nanophotodetector arrays and to provide integration with state-of-the-art electronic circuits.

In this work, we demonstrate the feasibility of using nanoimprint lithography (NIL) to make efficient low bandgap polymer solar cells with well-ordered heterojunction. High quality low bandgap conjugated polymer poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) nanogratings are fabricated using this technique for the first time. The geometry effect of PCPDTBT nanostructures on the solar cell performance is investigated by making PCPDTBT/C₇₀ solar cells with different feature sizes of PCPDTBT nanogratings. It is found that the power conversion efficiency (PCE) increases with increasing nanograting height, PCPDTBT/C₇₀ junction area, and decreasing nanograting width. We also find that NIL makes PCPDTBT chains interact more strongly and form an improved structural ordering. Solar cells made on the highest aspect ratio PCPDTBT nanostructures are among the best reported devices using the same material with a PCE of 5.5%.

Photonic crystals have been widely investigated since they have great potential to manipulate the flow of light in an ultra-compact-scale and enable numerous innovative applications. 2D slab photonic crystals for the telecommunication C band at around 1550 nm have multi-scale structures that are typically micron-scale waveguides and deep sub-micron-scale air hole arrays. Several steps of nanolithography and photolithography are usually used for the fabrication of multi-scale photonic crystals. In this work, we report a one-step lithography process to pattern both micron and deep sub-micron features simultaneously for the 2D slab photonic crystal using combined-nanoimprint-and-photolithography. As a demonstrator, a 2D silicon photonic crystal transverse magnetic (TM) polarizer was fabricated, and the operation was successfully demonstrated.

We demonstrate the effects of nanostructure geometry on the nanoimprint induced poly(3-hexylthiophene-2,5-diyl) (P3HT) chain alignment and the performance of nanoimprinted photovoltaic devices. Out-of-plane and in-plane grazing incident X-ray diffraction techniques are employed to characterize the nanoimprint induced chain alignment in P3HT nanogratings with different widths, spacings and heights. We observe the dependence of the crystallite orientation on nanostructure geometry such that a larger width of P3HT nanogratings leads to more edge-on chain alignment while the increase in height gives more vertical alignment. Consequently, P3HT/[6,6]-phenyl-C₆₁-butyric-acid-methyl-ester (PCBM) solar cells with the highest density and aspect ratio P3HT nanostructures show the highest power conversion efficiency among others, which is attributed to the efficient charge separation, transport and light absorption.

Abstract: We live in a world of convergence where scientific techniques from a variety of seemingly disparate fields are being applied cohesively to the study and solution of biomedical problems. For instance, the semiconductor processing field has been primarily developed to cater to the needs of the ever decreasing transistor size and cost while increasing functionality of electronic circuits. In recent years, pioneers in this field have equipped themselves with a powerful understanding of how the same techniques can be applied in the biomedical field to develop new and efficient systems for the diagnosis, analysis and treatment of various conditions in the human body. In this paper, we review the major inventions and experimental methods which have been developed for nano/micro fluidic channels, nanoparticles fabricated by top-down methods, and in-vivo nanoporous microcages for effective drug delivery. This paper focuses on the information contained in patents as well as the corresponding technical publications. The goal of the paper is to help emerging scientists understand and improvise over these inventions.