TET. Matthew Evans

T. Matthew Evans

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


T. Matthew Evans has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Gradation effects on the mechanical response of crushed stone aggregate

    by Charles N. Cunningham, T. Matthew Evans, Akhtar A. Tayebali

    A study was conducted to evaluate the effects of varying the gradation of aggregate base course (ABC) on material performance. Five different gradations consistent with a range of common ABC were selected. Experimental trials were performed to classify the materials and assess the performance differences between the five gradations. The gradation was found to affect the behaviour of the aggregate in that coarser gradations gave better strength and resilience values under conditions most similar to those found in the field. From research and experience during the laboratory testing, it was concluded that the coarsest blends became too difficult to realistically work with and they also lacked the stability of the well-graded combinations. It was also observed that as the amount of fines in the specimens exceeded 8–12% by mass, the fines governed the behaviour of the material. Results are interpreted using previously published work on specific surface, ‘ideal’ gradations and micromechanical models for the response of granular materials.


  • Discrete Simulations of Particulate-Structure Interactions

    by T. Matthew Evans, Jeremy Kress

    The design of structures that come into contact with granular soils is typically based on continuum plasticity theory with empirical modifications to improve agreement with observed system response. These approaches have the advantage of experience, but results are often not portable across structure types, construction methods, or site conditions. This lack of portability arises from the empirical nature of project-specific modifications to the original theories. Thus, traditional methods typically require a significant amount of input information, such as that available from thorough and well-formed laboratory and/or in-situ testing programs. These testing programs are viable for many large projects, but that may not always be the case (consider, for example, lunar or Martian colonization). Thus, it is necessary to develop models that can be calibrated based on small quantities of soil and subsequently used for design. In this paper, we present results from simple discrete element method (DEM) simulations of shallow foundations in contact with granular material. Results are shown to qualitatively reproduce expected response based on traditional analyses. This implies that the current models may be reasonably used for parametric analyses to assess impact of design parameters on system response. Preliminary results are presented for both terrestrial and low-gravity environments.


  • Multiscale investigation of shear bands in sand: Physical and numerical experiments

    by T. Matthew Evans, J. David Frost

    In many geotechnical systems, it is not uncommon to observe failure in zones of high localized strain called shear bands. The existing models predict the existence and the extent of these localizations, but provide little insight into the micromechanics within the shear bands. This research captures and compares the variation in microstructure both inside and outside of shear bands that formed in physical laboratory plane strain and companion numerical two‐dimensional discrete element method (DEM) biaxial compression experiments. Unsheared and sheared laboratory specimens of Ottawa 20–30 sand of varying dilatancy were solidified using a two‐stage resin impregnation procedure. The solidified specimens were sectioned and the resulting surfaces were prepared for microstructure observation using optical bright‐field microscopy and stereological analysis. Statistical properties of microstructural parameters for sub‐regions in a grid pattern and along predefined inclined zones were determined. Similar measurements were performed on 2D DEM simulation specimens at varying strain levels to characterize the evolution of microstructure with increasing strain. The results showed how differences evolved in the mean, standard deviation, and entropy of void distributions with increasing global strain levels. The results indicate how disorder increases and that the material within the shear band does not adhere to the classical concept of critical state, but reaches a terminal void ratio that is largely a function of initial void ratio. Furthermore, there appears to be a transition zone between the far field and the fully formed shear block, as opposed to an abrupt delineation as is traditionally inferred. Copyright © 2010 John Wiley & Sons, Ltd.


  • Visualization and Analysis of Microstructure in Three-Dimensional Discrete Numerical Models

    by T. Matthew Evans, Steve Chall, Xueliang Zhao, Theresa-Marie Rhyne

    A computer program has been developed to allow for the virtual slicing of irregularly spaced and irregularly shaped three-dimensional image data. The program was used to virtually slice three-dimensional particle assemblies from discrete element method (DEM) simulations, allowing, for the first time, direct comparison to two-dimensional slices extracted from solidified physical specimens. Based on slices obtained from the numerical specimens, it is possible to compare quantitatively numerical microstructure directly to its physical analog, which should lead to greatly improved calibrations of granular mechanics models, and could facilitate the calibration of models across all scales of interest rather than solely at specimen boundaries. Improved confidence in the ability of the DEM to realistically simulate the microstructure of granular assemblies (through improved multiscale calibration) should result in increased confidence in microstructural parameters measurable in numerical simulations but inaccessi...


  • Discrete Simulations of Laboratory Loading Conditions

    by Xueliang Zhao, T. Matthew Evans

    It is well known that all three principal stresses play a role in the stress-strain-strength-volume response of solids and granular materials, yet conventional triaxial compression tests and direct shear tests are typically used for the determination of design parameters for granular materials, even when field conditions may be plane strain (e.g., behind a long retaining wall). The effects of loading conditions on the macroscale response of granular materials have been studied extensively using experimental methods and it is relatively straightforward to quantify the variations in material macroresponse using continuum constitutive equations. However, these methods provide relatively little insight into the driving micromechanics that govern macroscale behavior, particularly in soils that fail via regions of high localized strain (e.g., shear banding). Thus, it is desirable to develop a set of models that reproduce the expected macroscopic behavior and allow insight into the governing microscale mechanics...


  • Grain Size Distribution Effects in 2D Discrete Numerical Experiments

    by T. Matthew Evans, Hamed Mojarrad, Charles Cunningham, Akhtar A. Tayebali

    The discrete element method (DEM) is becoming increasingly popular for the simulation and study of the mechanical response of granular materials. The narrow grain size distributions (GSD) used in most DEM studies are not necessarily representative of real soils, wherein grain sizes vary over several orders of magnitude. In the current study, biaxial compression tests on two-dimensional particulate assemblies are simulated and the results analyzed as a function of GSD. Four GSD's are simulated and material response is interpreted in terms of stress-strain-strength behavior at the macroscale and in terms of particle-level properties at the microscale. These types of studies may ultimately lead to a better fundamental understanding of the response of real soils with varying GSD's. Results of the simulations indicate that a coarser well-graded specimen has a higher shear strength than a finer well-graded specimen, consistent with a higher rate of dilation at peak for the coarser specimen. The more uniformly graded specimen is softer at low strains, requires a higher strain to peak, and is significantly more dilatant than the well-graded assemblies.