Bernhard Fügenschuh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernhard Fügenschuh has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Stefan M. Schmid
Univerität Basel, Basel, Switzerland
3 shared publications - Heike R. Gröger2 shared publications
- Ana Mladenović
University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia
1 shared publication - Andrea Loprieno1 shared publication
Branislav Trivić
1 shared publication- Florian H. Dalla Torre
Laboratory for Metal Physics and Technology, ETH Zurich
1 shared publication
Latest Publications
- Open Access
- 1 April 2017
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 68 (2) , 147-166
Constraints on the depositional age and tectonometamorphic evolution of marbles from the Biharia Nappe System (Apuseni Mountains, Romania)
Basement rocks from the Biharia Nappe System in the Apuseni Mountains comprise several dolomite and calcite marble sequences or lenses which experienced deformation and metamorphic overprint during the Alpine orogeny. New Sr, O and C-isotope data in combination with considerations from the lithological sequences indicate Middle to Late Triassic deposition of calcite marbles from the Vulturese-Belioara Series (Biharia Nappe s.str.). Ductile deformation and large-scale folding of the siliciclastic and carbonatic lithologies is attributed to NW-directed nappe stacking during late Early Cretaceous times (D2). The studied marble sequences experienced a metamorphic overprint under lower greenschist- facies conditions (316-370 °C based on calcite - dolomite geothermometry) during this tectonic event. Other marble sequences from the Biharia Nappe System (i.e. Vidolm and Baia de Arieș nappes) show similarities in the stratigraphic sequence and their isotope signature, together with a comparable structural position close to nappe contact. However, the dataset is not concise enough to allow for a definitive attribution of a Mesozoic origin to other marble sequences than the Vulturese-Belioara Series.
- 1 April 2017
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 68 (2) , 147-166
Open AccessConstraints on the depositional age and tectonometamorphic evolution of marbles from the Biharia Nappe System (Apuseni Mountains, Romania)
Basement rocks from the Biharia Nappe System in the Apuseni Mountains comprise several dolomite and calcite marble sequences or lenses which experienced deformation and metamorphic overprint during the Alpine orogeny. New Sr, O and C-isotope data in combination with considerations from the lithological sequences indicate Middle to Late Triassic deposition of calcite marbles from the Vulturese-Belioara Series (Biharia Nappe s.str.). Ductile deformation and large-scale folding of the siliciclastic and carbonatic lithologies is attributed to NW-directed nappe stacking during late Early Cretaceous times (D2). The studied marble sequences experienced a metamorphic overprint under lower greenschist- facies conditions (316-370 °C based on calcite - dolomite geothermometry) during this tectonic event. Other marble sequences from the Biharia Nappe System (i.e. Vidolm and Baia de Arieș nappes) show similarities in the stratigraphic sequence and their isotope signature, together with a comparable structural position close to nappe contact. However, the dataset is not concise enough to allow for a definitive attribution of a Mesozoic origin to other marble sequences than the Vulturese-Belioara Series.
- Open Access
- 1 August 2014
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 65 (4) , 307-326
Cretaceous—Quaternary tectonic evolution of the Tatra Mts (Western Carpathians): constraints from structural, sedimentary, geomorphological, and fission track data
The Tatra Mts area, located in the northernmost part of Central Western Carpathians on the border between Slovakia and Poland, underwent a complex Alpine tectonic evolution. This study integrates structural, sedimentary, and geomorphological data combined with fission track data from the Variscan granite rocks to discuss the Cretaceous to Quaternary tectonic and landscape evolution of the Tatra Mts. The presented data can be correlated with five principal tectonic stages (TS), including neotectonics. TS-1 (~95-80 Ma) is related to mid-Cretaceous nappe stacking when the Tatric Unit was overlain by Mesozoic sequences of the Fatric and Hronic Nappes. After nappe stacking the Tatric crystalline basement was exhumed (and cooled) in response to the Late Cretaceous/Paleogene orogenic collapse followed by orogen-parallel extension. This is supported by 70 to 60 Ma old zircon fission track ages. Extensional tectonics were replaced by transpression to transtension during the Late Paleocene to Eocene (TS-2; ~80-45 Ma). TS-3 (~45-20 Ma) is documented by thick Oligocene-lowermost Miocene sediments of the Central Carpathian Paleogene Basin which kept the underlying Tatric crystalline basement at elevated temperatures (ca. > 120 °C and < 200 °C). The TS-4 (~20-7 Ma) is linked to slow Miocene exhumation rate of the Tatric crystalline basement, as it is indicated by apatite fission track data of 9-12 Ma. The final shaping of the Tatra Mts has been linked to accelerated tectonic activity since the Pliocene (TS-5; ~7-0 Ma).
- 1 August 2014
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 65 (4) , 307-326
Open AccessCretaceous—Quaternary tectonic evolution of the Tatra Mts (Western Carpathians): constraints from structural, sedimentary, geomorphological, and fission track data
The Tatra Mts area, located in the northernmost part of Central Western Carpathians on the border between Slovakia and Poland, underwent a complex Alpine tectonic evolution. This study integrates structural, sedimentary, and geomorphological data combined with fission track data from the Variscan granite rocks to discuss the Cretaceous to Quaternary tectonic and landscape evolution of the Tatra Mts. The presented data can be correlated with five principal tectonic stages (TS), including neotectonics. TS-1 (~95-80 Ma) is related to mid-Cretaceous nappe stacking when the Tatric Unit was overlain by Mesozoic sequences of the Fatric and Hronic Nappes. After nappe stacking the Tatric crystalline basement was exhumed (and cooled) in response to the Late Cretaceous/Paleogene orogenic collapse followed by orogen-parallel extension. This is supported by 70 to 60 Ma old zircon fission track ages. Extensional tectonics were replaced by transpression to transtension during the Late Paleocene to Eocene (TS-2; ~80-45 Ma). TS-3 (~45-20 Ma) is documented by thick Oligocene-lowermost Miocene sediments of the Central Carpathian Paleogene Basin which kept the underlying Tatric crystalline basement at elevated temperatures (ca. > 120 °C and < 200 °C). The TS-4 (~20-7 Ma) is linked to slow Miocene exhumation rate of the Tatric crystalline basement, as it is indicated by apatite fission track data of 9-12 Ma. The final shaping of the Tatra Mts has been linked to accelerated tectonic activity since the Pliocene (TS-5; ~7-0 Ma).
- Open Access
- 1 April 2014
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 65 (2) , 147-161
The recent fault kinematics in the westernmost part of the Getic nappe system (Eastern Serbia): Evidence from fault slip and focal mechanism data
In this study we performed a calculation of the tectonic stress tensor based on fault slip data and all available focal mechanisms in order to determine the principal stress axes and the recent tectonic regime of the westernmost unit of the Getic nappe system (Gornjak-Ravanica Zone, Eastern Serbia). The study is based on a combined dataset involving paleostress analyses, the inversion of focal mechanisms and remote sensing. The results show dominant strike-slip kinematics with the maximal compression axis oriented NNE-SSW. This is compatible with a combined northward motion and counterclockwise rotation of the Adria plate as the controlling factor. However, the local stress field is also shown to be of great importance and is superimposed on the far-field stress. We managed to distinguish three areas with distinct seismic activity. The northern part of the research area is characterized by transtensional tectonics, possibly under the influence of the extension in the areas situated more to the northeast. The central and seismically most active part is dominated by strike-slip tectonics whereas the southern area is slightly transpressional, possibly under the influence of the rigid Moesian Platform situated to the east of the research area. The dominant active fault systems are oriented N-S (to NE-SW) and NW-SE and they occur as structures of either regional or local significance. Regional structures are active in the northern and central part of the study area, while the active fault systems in the southern part are marked as locally important. This study suggests that seismicity of this area is controlled by the release of accumulated stress at local accommodation zones which are favourably oriented in respect to the active regional stress field.
- 1 April 2014
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 65 (2) , 147-161
Open AccessThe recent fault kinematics in the westernmost part of the Getic nappe system (Eastern Serbia): Evidence from fault slip and focal mechanism data
In this study we performed a calculation of the tectonic stress tensor based on fault slip data and all available focal mechanisms in order to determine the principal stress axes and the recent tectonic regime of the westernmost unit of the Getic nappe system (Gornjak-Ravanica Zone, Eastern Serbia). The study is based on a combined dataset involving paleostress analyses, the inversion of focal mechanisms and remote sensing. The results show dominant strike-slip kinematics with the maximal compression axis oriented NNE-SSW. This is compatible with a combined northward motion and counterclockwise rotation of the Adria plate as the controlling factor. However, the local stress field is also shown to be of great importance and is superimposed on the far-field stress. We managed to distinguish three areas with distinct seismic activity. The northern part of the research area is characterized by transtensional tectonics, possibly under the influence of the extension in the areas situated more to the northeast. The central and seismically most active part is dominated by strike-slip tectonics whereas the southern area is slightly transpressional, possibly under the influence of the rigid Moesian Platform situated to the east of the research area. The dominant active fault systems are oriented N-S (to NE-SW) and NW-SE and they occur as structures of either regional or local significance. Regional structures are active in the northern and central part of the study area, while the active fault systems in the southern part are marked as locally important. This study suggests that seismicity of this area is controlled by the release of accumulated stress at local accommodation zones which are favourably oriented in respect to the active regional stress field.
- Open Access
- 1 October 2013
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 64 (5) , 383-398
Thermal history of the Maramureş area (Northern Romania) constrained by zircon fission track analysis: Cretaceous metamorphism and Late Cretaceous to Paleocene exhumation
This study presents zircon fission track data from the Bucovinian nappe stack (northern part of the Inner Eastern Carpathians, Rodna Mountains) and a neighbouring part of the Biharia nappe system (Preluca massif) in order to unravel the thermal history of the area and its structural evolution by integrating the fission track data with published data on the tectonic and sedimentary evolution of the area. The increase of metamorphic temperatures towards the SW detected by the zircon fission track data suggests SW-wards increasing tectonic overburden (up to at least 15 km) and hence top NE thrusting. Sub-greenschist facies conditions during the Alpine metamorphic overprint only caused partial annealing of fission tracks in zircon in the external main chain of the Central Eastern Carpathians. Full annealing of zircon points to at least 300 °C in the more internal elements (Rodna Mountains and Preluca massif). The zircon fission track central and single grain ages largely reflect Late Cretaceous cooling and exhumation. A combination of fission track data and stratigraphic constraints points to predominantly tectonic differential exhumation by some 7-11 km, connected to massive Late Cretaceous extension not yet detected in the area. Later events such as the latest Cretaceous (“Laramian”) juxtaposition of the nappe pile with the internal Moldavides, causing exhumation by erosion, re-burial by sedimentation and tectonic loading during the Cenozoic had no impact on the zircon fission track data; unfortunately it prevented a study of the low temperature part of the Late Cretaceous exhumation history.
- 1 October 2013
- Published by Central Library of the Slovak Academy of Sciences in Geologica Carpathica
- Vol. 64 (5) , 383-398
Open AccessThermal history of the Maramureş area (Northern Romania) constrained by zircon fission track analysis: Cretaceous metamorphism and Late Cretaceous to Paleocene exhumation
This study presents zircon fission track data from the Bucovinian nappe stack (northern part of the Inner Eastern Carpathians, Rodna Mountains) and a neighbouring part of the Biharia nappe system (Preluca massif) in order to unravel the thermal history of the area and its structural evolution by integrating the fission track data with published data on the tectonic and sedimentary evolution of the area. The increase of metamorphic temperatures towards the SW detected by the zircon fission track data suggests SW-wards increasing tectonic overburden (up to at least 15 km) and hence top NE thrusting. Sub-greenschist facies conditions during the Alpine metamorphic overprint only caused partial annealing of fission tracks in zircon in the external main chain of the Central Eastern Carpathians. Full annealing of zircon points to at least 300 °C in the more internal elements (Rodna Mountains and Preluca massif). The zircon fission track central and single grain ages largely reflect Late Cretaceous cooling and exhumation. A combination of fission track data and stratigraphic constraints points to predominantly tectonic differential exhumation by some 7-11 km, connected to massive Late Cretaceous extension not yet detected in the area. Later events such as the latest Cretaceous (“Laramian”) juxtaposition of the nappe pile with the internal Moldavides, causing exhumation by erosion, re-burial by sedimentation and tectonic loading during the Cenozoic had no impact on the zircon fission track data; unfortunately it prevented a study of the low temperature part of the Late Cretaceous exhumation history.
- 1 October 2010
- Published by Springer Nature in International Journal of Earth Sciences
- Vol. 100 (5) , 963-992
The Valais units in Savoy (France): a key area for understanding the palaeogeography and the tectonic evolution of the Western Alps
- 1 October 2010
- Published by Springer Nature in International Journal of Earth Sciences
- Vol. 100 (5) , 963-992
The Valais units in Savoy (France): a key area for understanding the palaeogeography and the tectonic evolution of the Western Alps