Shiva Nagendra Saragur Madanayaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shiva Nagendra Saragur Madanayaka has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
Mukesh Khare
6 shared publicationsJyothi S. Menon
Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, India
4 shared publications- Mp Maiya
Indian Institute of Technology Madras
4 shared publications - Sruthi Jayaraj
Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, India
4 shared publications Uwe Schlink
Helmholtz Centre for Environmental Research UFZ
4 shared publicationsAnju Elizbath Peter
Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, India
3 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (4) , 230
Indoor Airborne Microplastics: A Critical Review of How Measurement Methods Shape Reported Concentrations, Sources and Inhalation Exposure
Indoor air is likely a major route of human exposure to microplastics (MPs), yet indoor airborne concentrations from active sampling span nearly four orders of magnitude, from below 1 to more than 1000 particles m−3. We assessed whether this variability reflects real differences or methodological heterogeneity by synthesizing 33 primary studies (2017–2026) on MPs in indoor air, deposition, settled dust and air-conditioner filters, recording the sample type, lower size limit and identification technique. Reported concentrations were negatively associated with the lower size limit (Spearman’s ρ = −0.58, 95% CI −0.88 to 0.05, n = 12), and the particles counted changed with it: studies resolving particles of a few micrometers were dominated by fragments, whereas those limited to larger particles found mainly fibers. Sample type and spectroscopic confirmation further shaped reported abundances. Polyester, polyamide, polypropylene and polyethylene prevailed across settings, pointing to textiles and furnishings as the main sources. MPs have been detected in human lung tissue and sputum, but estimated inhalation doses range from tens to tens of thousands of particles per day. Comparing indoor MP concentrations without accounting for methodological factors risks mistaking measurement differences for differences in exposure. We identify priorities for harmonized reporting, size-resolved sampling and exposure-relevant toxicology.
- 12 November 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (4) , 230
Open AccessIndoor Airborne Microplastics: A Critical Review of How Measurement Methods Shape Reported Concentrations, Sources and Inhalation Exposure
Indoor air is likely a major route of human exposure to microplastics (MPs), yet indoor airborne concentrations from active sampling span nearly four orders of magnitude, from below 1 to more than 1000 particles m−3. We assessed whether this variability reflects real differences or methodological heterogeneity by synthesizing 33 primary studies (2017–2026) on MPs in indoor air, deposition, settled dust and air-conditioner filters, recording the sample type, lower size limit and identification technique. Reported concentrations were negatively associated with the lower size limit (Spearman’s ρ = −0.58, 95% CI −0.88 to 0.05, n = 12), and the particles counted changed with it: studies resolving particles of a few micrometers were dominated by fragments, whereas those limited to larger particles found mainly fibers. Sample type and spectroscopic confirmation further shaped reported abundances. Polyester, polyamide, polypropylene and polyethylene prevailed across settings, pointing to textiles and furnishings as the main sources. MPs have been detected in human lung tissue and sputum, but estimated inhalation doses range from tens to tens of thousands of particles per day. Comparing indoor MP concentrations without accounting for methodological factors risks mistaking measurement differences for differences in exposure. We identify priorities for harmonized reporting, size-resolved sampling and exposure-relevant toxicology.
- Open Access
- 16 May 2026
- Published by Elsevier in Environmental Pollution
- Vol. 402, 128318
Particulate matter exposure to biomass cookstove emissions and lung deposition modelling in women and children: A comparative analysis
- 16 May 2026
- Published by Elsevier in Environmental Pollution
- Vol. 402, 128318
Open AccessParticulate matter exposure to biomass cookstove emissions and lung deposition modelling in women and children: A comparative analysis
- 5 May 2026
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 17 (7)
Characterization of airborne microplastics across contrasting indoor work microenvironments
- 5 May 2026
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 17 (7)
Characterization of airborne microplastics across contrasting indoor work microenvironments
- Open Access
- 18 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (8) , 13819-13834
Carbon Emission Intensity Modeling in Freight Operations Using eXplainable AI in Real-World Conditions
The present study evaluates the effect of real-world operational factors and driving behaviors that significantly contribute to CO2 emissions and total energy consumption of the port-based heavy-duty vehicles (HDVs). Interpretable machine learning techniques are applied within an eXplainable Artificial Intelligence (XAI) framework to assess the impact of input variables on prediction accuracy. The inherent simplifications in these approaches often limit their ability to capture the complex, nonlinear characteristics of vehicular emission determinants, particularly under dynamic, micro-operational conditions associated with real-world settings. XGBoost showed higher predictive accuracy over conventional regression and other ensemble methods, with up to 46% improvement in R 2 and over 80% reduction in estimation errors. To address the black-box nature associated with the model, this study adopts XAI techniques, with SHapley Additive exPlanations (SHAP) employed to quantify feature contributions and enhance the interpretability. The results show that real-world CO2 emission levels remain substantially high under dynamic operational conditions, emphasizing the need for improved transit and freight management strategies to mitigate vehicular emissions. This further reinforces the importance of regulatory frameworks that incorporate CO2 emission and fuel-efficiency standards alongside conventional pollutant limits. Such progressive targets are intended to curb the climate impact, stimulate technological innovation, and support long-term low-carbon transition goals.
- 18 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (8) , 13819-13834
Open AccessCarbon Emission Intensity Modeling in Freight Operations Using eXplainable AI in Real-World Conditions
The present study evaluates the effect of real-world operational factors and driving behaviors that significantly contribute to CO2 emissions and total energy consumption of the port-based heavy-duty vehicles (HDVs). Interpretable machine learning techniques are applied within an eXplainable Artificial Intelligence (XAI) framework to assess the impact of input variables on prediction accuracy. The inherent simplifications in these approaches often limit their ability to capture the complex, nonlinear characteristics of vehicular emission determinants, particularly under dynamic, micro-operational conditions associated with real-world settings. XGBoost showed higher predictive accuracy over conventional regression and other ensemble methods, with up to 46% improvement in R 2 and over 80% reduction in estimation errors. To address the black-box nature associated with the model, this study adopts XAI techniques, with SHapley Additive exPlanations (SHAP) employed to quantify feature contributions and enhance the interpretability. The results show that real-world CO2 emission levels remain substantially high under dynamic operational conditions, emphasizing the need for improved transit and freight management strategies to mitigate vehicular emissions. This further reinforces the importance of regulatory frameworks that incorporate CO2 emission and fuel-efficiency standards alongside conventional pollutant limits. Such progressive targets are intended to curb the climate impact, stimulate technological innovation, and support long-term low-carbon transition goals.
- Open Access
Physico-Chemical Characterisation of Particulate Matter and Ash from Biomass Combustion in Rural Indian Kitchens
In developing countries, indoor air pollution in rural areas is often attributed to the use of solid biomass fuels for cooking. Such fuels generate particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO2), polyaromatic hydrocarbons (PAHs), and volatile organic compounds (VOCs). PM created from biomass combustion is a pollutant particularly damaging to health. This rigorous study employed a personal sampling device and multi-stage cascade impactor to collect airborne PM (including PM2.5) and deposited ash from 20 real-world kitchen microenvironments. A robust analysis of the PM was undertaken using a range of morphological, physical, and chemical techniques, the results of which were then compared to a controlled burn experiment. Results revealed that airborne PM was predominantly carbon (~85%), with the OC/EC ratio varying between 1.17 and 11.5. Particles were primarily spherical nanoparticles (50–100 nm) capable of deep penetration into the human respiratory tract (HRT). This is the first systematic characterisation of biomass cooking emissions in authentic rural kitchen settings, linking particle morphology, chemistry and toxicology at health-relevant scales. Toxic heavy metals like Cr, Pb, Cd, Zn, and Hg were detected in PM, while ash was dominated by crustal elements such as Ca, Mg and P. VOCs comprised benzene derivatives, esters, ethers, ketones, tetramethysilanes (TMS), and nitrogen-, phosphorus- and sulphur-containing compounds. This research showcases a unique collection technique that gathered particles indicative of their potential for penetration and deposition in the HRT. Impact stems from the close link between the physico-chemical properties of particle emissions and their environmental and epidemiological effects. By providing a critical evidence base for exposure modelling, risk assessment and clean cooking interventions, this study delivers internationally significant insights. Our methodological innovation, capturing respirable nanoparticles under real-world conditions, offers a transferable framework for indoor air quality research across low- and middle-income countries. The findings therefore advance both fundamental understanding of combustion-derived nanoparticle behaviour and practical knowledge to inform public health, environmental policy, and the UN Sustainable Development Goals.
Open AccessPhysico-Chemical Characterisation of Particulate Matter and Ash from Biomass Combustion in Rural Indian Kitchens
In developing countries, indoor air pollution in rural areas is often attributed to the use of solid biomass fuels for cooking. Such fuels generate particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO2), polyaromatic hydrocarbons (PAHs), and volatile organic compounds (VOCs). PM created from biomass combustion is a pollutant particularly damaging to health. This rigorous study employed a personal sampling device and multi-stage cascade impactor to collect airborne PM (including PM2.5) and deposited ash from 20 real-world kitchen microenvironments. A robust analysis of the PM was undertaken using a range of morphological, physical, and chemical techniques, the results of which were then compared to a controlled burn experiment. Results revealed that airborne PM was predominantly carbon (~85%), with the OC/EC ratio varying between 1.17 and 11.5. Particles were primarily spherical nanoparticles (50–100 nm) capable of deep penetration into the human respiratory tract (HRT). This is the first systematic characterisation of biomass cooking emissions in authentic rural kitchen settings, linking particle morphology, chemistry and toxicology at health-relevant scales. Toxic heavy metals like Cr, Pb, Cd, Zn, and Hg were detected in PM, while ash was dominated by crustal elements such as Ca, Mg and P. VOCs comprised benzene derivatives, esters, ethers, ketones, tetramethysilanes (TMS), and nitrogen-, phosphorus- and sulphur-containing compounds. This research showcases a unique collection technique that gathered particles indicative of their potential for penetration and deposition in the HRT. Impact stems from the close link between the physico-chemical properties of particle emissions and their environmental and epidemiological effects. By providing a critical evidence base for exposure modelling, risk assessment and clean cooking interventions, this study delivers internationally significant insights. Our methodological innovation, capturing respirable nanoparticles under real-world conditions, offers a transferable framework for indoor air quality research across low- and middle-income countries. The findings therefore advance both fundamental understanding of combustion-derived nanoparticle behaviour and practical knowledge to inform public health, environmental policy, and the UN Sustainable Development Goals.
- 18 August 2025
- Published by Springer Nature in Journal of Atmospheric Chemistry
- Vol. 82 (2) , 1-16
Environmental impact of VOC emissions from motor vehicle gasoline and vapours: composition analysis and implications
- 18 August 2025
- Published by Springer Nature in Journal of Atmospheric Chemistry
- Vol. 82 (2) , 1-16
Environmental impact of VOC emissions from motor vehicle gasoline and vapours: composition analysis and implications
- 3 July 2025
- Published by Springer Nature
- p. 317-327
Emissions Assessment and Health Impacts of PM2.5 Due to Burning Sugarcane Residue in Mandya District, Karnataka
- 3 July 2025
- Published by Springer Nature
- p. 317-327
Emissions Assessment and Health Impacts of PM2.5 Due to Burning Sugarcane Residue in Mandya District, Karnataka
- 3 July 2025
- Published by Springer Nature
- p. 285-294
Investigation of Occupational Thermal Comfort in Urban Subway Stations
- 3 July 2025
- Published by Springer Nature
- p. 285-294
Investigation of Occupational Thermal Comfort in Urban Subway Stations
- 23 July 2024
- Published by Springer Nature
- p. 123-135
Proximity Analysis Using GIS to Understand BTEX Exposure and Its Risk Assessment
- 23 July 2024
- Published by Springer Nature
- p. 123-135
Proximity Analysis Using GIS to Understand BTEX Exposure and Its Risk Assessment