David Bertrand
David Bertrand has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Stéphane Grange
Professeur de structures, INSA Lyon, laboratoire GEOMAS (géomécanique, matériaux, structures) (EA 7495)
4 shared publications - Cédric Desprez
INsa Lyon, GEOMAS
2 shared publications - Jean-Baptiste Charrié
INsa Lyon, GEOMAS
2 shared publications A. Trad
INSA Lyon, L.G.C.I.E. (Laboratoire de Génie Civil et d’Ingéniérie Environnementale)
1 shared publication- Ali Limam
MATEIS, CNRS, INSA-Lyon, University of Lyon, UMR 5510, 69100 Villeurbanne, France
1 shared publication - Claire Silvani
Univ Lyon, INSA Lyon, GEOMAS, F-69621 Villeurbanne, France
1 shared publication
Latest Publications
- 31 January 2025
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 29 (8) , 1674-1699
Nonlinear sub-structured pseudo-dynamic testing: application to progressive collapse on reinforced concrete frames
- 31 January 2025
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 29 (8) , 1674-1699
Nonlinear sub-structured pseudo-dynamic testing: application to progressive collapse on reinforced concrete frames
- 6 April 2022
- Published by Elsevier in Journal of Building Engineering
- Vol. 52
Progressive collapse analysis of RC frame building based on Pseudo-Dynamic (PsD) testing with sub-structuring
- 6 April 2022
- Published by Elsevier in Journal of Building Engineering
- Vol. 52
Progressive collapse analysis of RC frame building based on Pseudo-Dynamic (PsD) testing with sub-structuring
- 1 April 2021
- Published by Elsevier in International Journal of Solids and Structures
- Vol. 214-215, 45-60
Nonlinear dynamic simulation of cable based structures interacting with sliding objects using the concept of macro element
- 1 April 2021
- Published by Elsevier in International Journal of Solids and Structures
- Vol. 214-215, 45-60
Nonlinear dynamic simulation of cable based structures interacting with sliding objects using the concept of macro element
- 15 April 2019
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 25 (10) , 1782-1795
A novel identification method for obtaining bending moment–curvature relations of wood stems based on digital image correlation and SDOF analysis
Bending moment–curvature relations (M-χ) are useful in many beam modelling approaches. It allows describing in a simple way the mechanical behaviour at the cross-section scale and can be used to model continuous beams as single degree of freedom systems dedicated to perform stochastic analysis. This paper focused on tree mechanical charaterisation and presents an identification method for obtaining bending moment–curvature relationships up to failure from Digital Image Correlation (DIC) and experimental three points bending tests. Due to wood intrinsic variability, the proposed identification method has been validated from a Finite Element (FE) model which aims at simulating precisely the bending response of a cylindrical stem. The refined FE model has been developed based on the geometry and the boundary conditions of the experimentally tested stems. M-χ curves are derived from the FE model and used within a Single Degree Of Freedom (SDOF) approach. At the stem scale, the prediction of the SDOF model (Force-Displacement) is compared to the FE model and lead to a good agreement. Then the approach is used to characterise fresh European beech samples allowing deriving their mechanical properties (longitudinal Young modulus, modulus of elasticity and modulus of rupture).
- 15 April 2019
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 25 (10) , 1782-1795
A novel identification method for obtaining bending moment–curvature relations of wood stems based on digital image correlation and SDOF analysis
Bending moment–curvature relations (M-χ) are useful in many beam modelling approaches. It allows describing in a simple way the mechanical behaviour at the cross-section scale and can be used to model continuous beams as single degree of freedom systems dedicated to perform stochastic analysis. This paper focused on tree mechanical charaterisation and presents an identification method for obtaining bending moment–curvature relationships up to failure from Digital Image Correlation (DIC) and experimental three points bending tests. Due to wood intrinsic variability, the proposed identification method has been validated from a Finite Element (FE) model which aims at simulating precisely the bending response of a cylindrical stem. The refined FE model has been developed based on the geometry and the boundary conditions of the experimentally tested stems. M-χ curves are derived from the FE model and used within a Single Degree Of Freedom (SDOF) approach. At the stem scale, the prediction of the SDOF model (Force-Displacement) is compared to the FE model and lead to a good agreement. Then the approach is used to characterise fresh European beech samples allowing deriving their mechanical properties (longitudinal Young modulus, modulus of elasticity and modulus of rupture).
- 19 February 2012
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 45 (5) , 885-900
Full-Scale Dynamic Analysis of an Innovative Rockfall Fence Under Impact Using the Discrete Element Method: from the Local Scale to the Structure Scale
- 19 February 2012
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 45 (5) , 885-900
Full-Scale Dynamic Analysis of an Innovative Rockfall Fence Under Impact Using the Discrete Element Method: from the Local Scale to the Structure Scale
- Open Access
- 15 July 2010
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 10 (7) , 1531-1545
Physical vulnerability of reinforced concrete buildings impacted by snow avalanches
This paper deals with the assessment of physical vulnerability of civil engineering structures to snow avalanche loadings. In this case, the vulnerability of the element at risk is defined by its damage level expressed on a scale from 0 (no damage) to 1 (total destruction). The vulnerability of a building depends on its structure and flow features (geometry, mechanical properties, type of avalanche, topography, etc.). This makes it difficult to obtain vulnerability relations. Most existing vulnerability relations have been built from field observations. This approach suffers from the scarcity of well documented events. Moreover, the back analysis is based on both rough descriptions of the avalanche and the structure. To overcome this problem, numerical simulations of reinforced concrete structures loaded by snow avalanches are carried out. Numerical simulations allow to study, in controlled conditions, the structure behavior under snow avalanche loading. The structure is modeled in 3-D by the finite element method (FEM). The elasto-plasticity framework is used to represent the mechanical behavior of both materials (concrete and steel bars) and the transient feature of the avalanche loading is taken into account in the simulation. Considering a reference structure, several simulation campaigns are conducted in order to assess its snow avalanches vulnerability. Thus, a damage index is defined and is based on global and local parameters of the structure. The influence of the geometrical features of the structure, the compressive strength of the concrete, the density of steel inside the composite material and the maximum impact pressure on the damage index are studied and analyzed. These simulations allow establishing the vulnerability as a function of the impact pressure and the structure features. The derived vulnerability functions could be used for risk analysis in a snow avalanche context.
- 15 July 2010
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 10 (7) , 1531-1545
Open AccessPhysical vulnerability of reinforced concrete buildings impacted by snow avalanches
This paper deals with the assessment of physical vulnerability of civil engineering structures to snow avalanche loadings. In this case, the vulnerability of the element at risk is defined by its damage level expressed on a scale from 0 (no damage) to 1 (total destruction). The vulnerability of a building depends on its structure and flow features (geometry, mechanical properties, type of avalanche, topography, etc.). This makes it difficult to obtain vulnerability relations. Most existing vulnerability relations have been built from field observations. This approach suffers from the scarcity of well documented events. Moreover, the back analysis is based on both rough descriptions of the avalanche and the structure. To overcome this problem, numerical simulations of reinforced concrete structures loaded by snow avalanches are carried out. Numerical simulations allow to study, in controlled conditions, the structure behavior under snow avalanche loading. The structure is modeled in 3-D by the finite element method (FEM). The elasto-plasticity framework is used to represent the mechanical behavior of both materials (concrete and steel bars) and the transient feature of the avalanche loading is taken into account in the simulation. Considering a reference structure, several simulation campaigns are conducted in order to assess its snow avalanches vulnerability. Thus, a damage index is defined and is based on global and local parameters of the structure. The influence of the geometrical features of the structure, the compressive strength of the concrete, the density of steel inside the composite material and the maximum impact pressure on the damage index are studied and analyzed. These simulations allow establishing the vulnerability as a function of the impact pressure and the structure features. The derived vulnerability functions could be used for risk analysis in a snow avalanche context.