Sevgi Kocaoba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sevgi Kocaoba has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Goksel Akcin
Department of Chemistry, Faculty of Art and Science, Yildiz Technical University, Istanbul, Turkey
5 shared publicationsGulten Cetin
Department of Chemistry, Faculty of Art and Science, Yildiz Technical University, Istanbul, Turkey
3 shared publicationsG. Akcin
2 shared publications- Gulten Cetin
Chemistry Department, Faculty of Science and Art, Yildiz Technical University, Campus of Davutpasa, Esenler, 34220 Istanbul, Turkey
2 shared publications Munevver Arısoy
Faculty of Health Sciences, Department of Nutrition and Dietary, Ankara University, Altındag, Ankara, Turkey
2 shared publicationsYüksel Orhan
2 shared publications
Latest Publications
- Open Access
- 5 May 2023
- Published by Springer Nature in SN Applied Sciences
- Vol. 5 (6) , 1-15
Determination of metal contents in some green leafy vegetables in Marmara region of Turkey
This study focused on the analysis of mineral and heavy metal contents of spinach, lettuce and parsley samples in different regions to investigate the risks of chronic exposure to heavy metal contamination. After the microwave digestion process, the metal contents of the samples (Na, Mg, Al, P, K, Ca, Fe, Cu, Zn, As, Se, Cd, Sn, Hg, Pb) were determined with the ICP-MS. Two parallel analysis samples were prepared from each sample, analyzed three times, and the mean values of the analyzes performed were reported. From the analysis, the order of finding heavy metals in the samples is Cu > Pb > Cd > As > Sn > Hg. The results were evaluated statistically and Cu, Pb, Cd, As and Sn values were found high in spinach samples (p < 0.05). According to the results of the analysis; the samples with the highest content of Cu, Pb and Cd in spinach samples are samples taken from Tekirdağ (5.1 ± 0.3 mg/kg), Edirne (0.106 ± 0.007 mg/kg) and Tekirdağ (0.080 ± 0.004 mg/kg), respectively. One of the important reasons for this is the increase in industrial areas in those regions. The results were compared with the certified reference materials, the quantities of analytes were determined to be compatible with the certificate values and the results of the analysis were proved to be correct.
- 5 May 2023
- Published by Springer Nature in SN Applied Sciences
- Vol. 5 (6) , 1-15
Open AccessDetermination of metal contents in some green leafy vegetables in Marmara region of Turkey
This study focused on the analysis of mineral and heavy metal contents of spinach, lettuce and parsley samples in different regions to investigate the risks of chronic exposure to heavy metal contamination. After the microwave digestion process, the metal contents of the samples (Na, Mg, Al, P, K, Ca, Fe, Cu, Zn, As, Se, Cd, Sn, Hg, Pb) were determined with the ICP-MS. Two parallel analysis samples were prepared from each sample, analyzed three times, and the mean values of the analyzes performed were reported. From the analysis, the order of finding heavy metals in the samples is Cu > Pb > Cd > As > Sn > Hg. The results were evaluated statistically and Cu, Pb, Cd, As and Sn values were found high in spinach samples (p < 0.05). According to the results of the analysis; the samples with the highest content of Cu, Pb and Cd in spinach samples are samples taken from Tekirdağ (5.1 ± 0.3 mg/kg), Edirne (0.106 ± 0.007 mg/kg) and Tekirdağ (0.080 ± 0.004 mg/kg), respectively. One of the important reasons for this is the increase in industrial areas in those regions. The results were compared with the certified reference materials, the quantities of analytes were determined to be compatible with the certificate values and the results of the analysis were proved to be correct.
- Open Access
- 10 June 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-10
Chromium removal from tannery wastewaters with a strong cation exchange resin and species analysis of chromium by MINEQL+
Chromium (III) salts are highly applied for tanning purpose in tannery industries. The purpose of this study was removal and recovery of chromium(III) from tannery wastewater with a strong cation exchange resin. For this purpose, Amberlite 252 ZU was chosen as a strong cation exchange resin. In the first part of this study, The MINEQL+ computer program was applied depending on the optimum concentration and pH for determining Cr species in aqueous solutions. The second part of the work consists of measuring the exchange equilibrium of H+ ions and Cr(III) ions. Therefore, solutions containing fixed amounts of chromium were brought into contact with different amounts of resins. The evaluation of the obtained equilibrium parameters was done by surface complexing theory. Retention and regeneration steps were successfully performed in the column without any significant change up to 10 cycles. Efficiency was between 90 and 98% in removal studies, and between 81 and 92% in recovery studies. The results showed that a strong cation exchange resin Amberlite 252 ZU can be successfully used for chromium removal and recovery.
- 10 June 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-10
Open AccessChromium removal from tannery wastewaters with a strong cation exchange resin and species analysis of chromium by MINEQL+
Chromium (III) salts are highly applied for tanning purpose in tannery industries. The purpose of this study was removal and recovery of chromium(III) from tannery wastewater with a strong cation exchange resin. For this purpose, Amberlite 252 ZU was chosen as a strong cation exchange resin. In the first part of this study, The MINEQL+ computer program was applied depending on the optimum concentration and pH for determining Cr species in aqueous solutions. The second part of the work consists of measuring the exchange equilibrium of H+ ions and Cr(III) ions. Therefore, solutions containing fixed amounts of chromium were brought into contact with different amounts of resins. The evaluation of the obtained equilibrium parameters was done by surface complexing theory. Retention and regeneration steps were successfully performed in the column without any significant change up to 10 cycles. Efficiency was between 90 and 98% in removal studies, and between 81 and 92% in recovery studies. The results showed that a strong cation exchange resin Amberlite 252 ZU can be successfully used for chromium removal and recovery.
- Open Access
- 16 May 2022
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 13 (1) , 1-10
Determination of some heavy metals from aqueous solutions using modified Amberlite XAD-4 resin by selective solid-phase extraction
The adsorption efficiency of Pb(II) and Cd(II) from aqueous solutions on m-phenylenediamine-modified Amberlite XAD-4 resin was investigated. The effects of pH, adsorbent amount, initial metal concentration, eluent type and volume and flow rate on the retention of the metal ions have been studied on column studies. The optimum parameters were determined as pH 5, concentration 10 mg/L, stirring time 30 min and 0.2 g adsorbent amount and flow rate 2.5 mL/min for a quantitative adsorption. Sorption data were interpreted in terms of Langmuir and Freundlich equations, and both models were found to be fully appropriate. Each column can be used up to 10 sequential analyses without considerable change. The results indicate high metal adsorption capacity and satisfactory recovery of Pb(II) and Cd(II).
- 16 May 2022
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 13 (1) , 1-10
Open AccessDetermination of some heavy metals from aqueous solutions using modified Amberlite XAD-4 resin by selective solid-phase extraction
The adsorption efficiency of Pb(II) and Cd(II) from aqueous solutions on m-phenylenediamine-modified Amberlite XAD-4 resin was investigated. The effects of pH, adsorbent amount, initial metal concentration, eluent type and volume and flow rate on the retention of the metal ions have been studied on column studies. The optimum parameters were determined as pH 5, concentration 10 mg/L, stirring time 30 min and 0.2 g adsorbent amount and flow rate 2.5 mL/min for a quantitative adsorption. Sorption data were interpreted in terms of Langmuir and Freundlich equations, and both models were found to be fully appropriate. Each column can be used up to 10 sequential analyses without considerable change. The results indicate high metal adsorption capacity and satisfactory recovery of Pb(II) and Cd(II).
- Open Access
- 8 June 2021
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 12 (1) , 1-11
The use of Phanerochaete chrysosporium for modification of bentonite for preconcentration and determination of heavy metals
In this study, a solid phase extraction method was successfully applied in the preconcentration and determination of trace levels of Cu(II) and Cd(II) ions and Phanerochaete chrysosporium (white rot fungus) modified bentonite was used as adsorbent. After the biosorption of Cu(II) and Cd(II) ions, metal concentrations in the samples were determined by atomic absorption spectrophotometry. pH, adsorbent amount, eluent type, sample volume, and flow rate, which are effective in the adsorption of metal ions, have been studied. 1 M HCl was used for desorption of these metal ions retained (recovery 95–100%). In addition, the effect of interfered ions has also been investigated. Sorption data were examined according to Langmuir and Freundlich adsorption equations. The results obtained show that the applied method has a high metal biosorption capacity, and Cu(II) and Cd(II) ions are successfully recovered. It was also successful in applying the proposed enrichment method to real water samples.Recovery values between 92.3% and 97.3% were obtained for the studied metal ions. According to the results, the proposed method can be successfully applied to water analysis at 95% confidence interval.
- 8 June 2021
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 12 (1) , 1-11
Open AccessThe use of Phanerochaete chrysosporium for modification of bentonite for preconcentration and determination of heavy metals
In this study, a solid phase extraction method was successfully applied in the preconcentration and determination of trace levels of Cu(II) and Cd(II) ions and Phanerochaete chrysosporium (white rot fungus) modified bentonite was used as adsorbent. After the biosorption of Cu(II) and Cd(II) ions, metal concentrations in the samples were determined by atomic absorption spectrophotometry. pH, adsorbent amount, eluent type, sample volume, and flow rate, which are effective in the adsorption of metal ions, have been studied. 1 M HCl was used for desorption of these metal ions retained (recovery 95–100%). In addition, the effect of interfered ions has also been investigated. Sorption data were examined according to Langmuir and Freundlich adsorption equations. The results obtained show that the applied method has a high metal biosorption capacity, and Cu(II) and Cd(II) ions are successfully recovered. It was also successful in applying the proposed enrichment method to real water samples.Recovery values between 92.3% and 97.3% were obtained for the studied metal ions. According to the results, the proposed method can be successfully applied to water analysis at 95% confidence interval.
- 24 August 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (17) , 5979-5993
Surface complexation modelling of chromium(III) ion exchange by a strong cation exchange resin
In the present study, the removal of chromium(III) from tannery wastewaters by means of ion exchange was investigated to develop a possible recovery. Experimental investigations were carried out using a strongly acidic cation exchange resin, Amberlite 200. The first part of experiments comprised the measurement of the equilibrium of exchange of Cr(III) for H+. For this purpose different amounts of resins were contacted with a fixed volume of chromium-bearing solution. For evaluation of equilibrium parameters, the surface complexation theory was applied. In the second part, chromium(III) species elimination was studied in column experiments with repeated exhaustion and regeneration series. As a result, it was obtained successful results for removal and recovery of chromium with strong cation exchange resin, Amberlite 200.
- 24 August 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (17) , 5979-5993
Surface complexation modelling of chromium(III) ion exchange by a strong cation exchange resin
In the present study, the removal of chromium(III) from tannery wastewaters by means of ion exchange was investigated to develop a possible recovery. Experimental investigations were carried out using a strongly acidic cation exchange resin, Amberlite 200. The first part of experiments comprised the measurement of the equilibrium of exchange of Cr(III) for H+. For this purpose different amounts of resins were contacted with a fixed volume of chromium-bearing solution. For evaluation of equilibrium parameters, the surface complexation theory was applied. In the second part, chromium(III) species elimination was studied in column experiments with repeated exhaustion and regeneration series. As a result, it was obtained successful results for removal and recovery of chromium with strong cation exchange resin, Amberlite 200.
- 19 February 2019
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 55 (5) , 896-906
Adsorption of Fe(II) and Fe(III) from aqueous solution by using sepiolite: speciation studies with MINEQL+ computer program
As a low-cost adsorbent, sepiolite has been used for the adsorption of Fe(II) and Fe(III) from aqueous solutions. The proposed method was applied to the determination of iron in tap water, employing standard addition. The results reported with a confidence interval for the 95% confidence level show the applicability of the proposed method to water analysis. Speciation studies are very important for understanding of the toxicity, bio-availability, bio-accumulation, and transport of an element in different environmental media. In this study, Fe(II) and Fe(III) speciation was investigated for optimum concentration and pH in aqueous solutions with MINEQL+ computer program.
- 19 February 2019
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 55 (5) , 896-906
Adsorption of Fe(II) and Fe(III) from aqueous solution by using sepiolite: speciation studies with MINEQL+ computer program
As a low-cost adsorbent, sepiolite has been used for the adsorption of Fe(II) and Fe(III) from aqueous solutions. The proposed method was applied to the determination of iron in tap water, employing standard addition. The results reported with a confidence interval for the 95% confidence level show the applicability of the proposed method to water analysis. Speciation studies are very important for understanding of the toxicity, bio-availability, bio-accumulation, and transport of an element in different environmental media. In this study, Fe(II) and Fe(III) speciation was investigated for optimum concentration and pH in aqueous solutions with MINEQL+ computer program.
- 2 March 2018
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (11) , 1703-1710
Biosorption of cadmium(II) and lead(II) from aqueous solutions using Pleurotus ostreatus immobilized on bentonite
The purpose of this work was to evaluate the potential of a white rot fungi (P. ostreatus) immobilized on bentonite, in a continuous flow removal of trace heavy metals. The procedure is based on the biosorption of Cd(II) and Pb(II) ions on a column of bentonite loaded with dried, dead fungi components prior to their determination by atomic absorption spectroscopy (AAS). Cd(II) and Pb(II) were determined with a relative error of less than 5%. Various parameters such as “pH, amount of adsorbent, eluent type and volume, flow rate of the solution and matrix interference effect” on the retention of the metal ions were investigated. This procedure was applied to Cd(II) and Pb(II) determination in aqueous solutions, including tap water system. The optimum experimental parameters were determined to be pH 5, concentration of 10 mg/L, contact time of 30 min and 0.2 g of adsorbent for a quantitative adsorption of the metals. The optimum flow rate was found to be 2.5 mL/min for all metal ions. Each column can be used up to 20 successive analyses without considerable change in recoveries of metal ions. The proposed method is excellent as regards simplicity, sensitivity, selectivity, precision, accuracy and column stability.
- 2 March 2018
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (11) , 1703-1710
Biosorption of cadmium(II) and lead(II) from aqueous solutions using Pleurotus ostreatus immobilized on bentonite
The purpose of this work was to evaluate the potential of a white rot fungi (P. ostreatus) immobilized on bentonite, in a continuous flow removal of trace heavy metals. The procedure is based on the biosorption of Cd(II) and Pb(II) ions on a column of bentonite loaded with dried, dead fungi components prior to their determination by atomic absorption spectroscopy (AAS). Cd(II) and Pb(II) were determined with a relative error of less than 5%. Various parameters such as “pH, amount of adsorbent, eluent type and volume, flow rate of the solution and matrix interference effect” on the retention of the metal ions were investigated. This procedure was applied to Cd(II) and Pb(II) determination in aqueous solutions, including tap water system. The optimum experimental parameters were determined to be pH 5, concentration of 10 mg/L, contact time of 30 min and 0.2 g of adsorbent for a quantitative adsorption of the metals. The optimum flow rate was found to be 2.5 mL/min for all metal ions. Each column can be used up to 20 successive analyses without considerable change in recoveries of metal ions. The proposed method is excellent as regards simplicity, sensitivity, selectivity, precision, accuracy and column stability.
- Open Access
- 1 January 2013
- Published by Wiley in Journal of Chemistry
- Vol. 2013 (1)
Removal and Recovery of Chromium from Solutions Simulating Tannery Wastewater by Strong Acid Cation Exchanger
The process in this study was conducted on removal of chromium(III) in a solution simulating a typical spent chrome tanning bath by the resin having matrix of styrene‐divinylbenzene‐based macroporous sulphonate, Amberjet 1200Na. The column experiments were carried out with the bed volumes of the resin as 751 mL and 1016 mL for different installation systems of the laboratory‐scale pilot plant. The feeding solutions in the bed volumes of 200 and 190 were used for each installation system. The regeneration behaviour of the resin was determined by using reverse regeneration procedure with the solution of hydrogen peroxide in alkaline. The regeneration kinetics of the exhausted resin was examined with a range of the solutions having different concentration series of the alkaline hydrogen peroxide. The solutions of the basic chromium sulphate were recycled for each installation system following the regeneration cycles. The chromium ions in effluent were quantitatively eluted, and satisfactory removal of chromium(III) and recovery of chromium(VI) were achieved.
- 1 January 2013
- Published by Wiley in Journal of Chemistry
- Vol. 2013 (1)
Open AccessRemoval and Recovery of Chromium from Solutions Simulating Tannery Wastewater by Strong Acid Cation Exchanger
The process in this study was conducted on removal of chromium(III) in a solution simulating a typical spent chrome tanning bath by the resin having matrix of styrene‐divinylbenzene‐based macroporous sulphonate, Amberjet 1200Na. The column experiments were carried out with the bed volumes of the resin as 751 mL and 1016 mL for different installation systems of the laboratory‐scale pilot plant. The feeding solutions in the bed volumes of 200 and 190 were used for each installation system. The regeneration behaviour of the resin was determined by using reverse regeneration procedure with the solution of hydrogen peroxide in alkaline. The regeneration kinetics of the exhausted resin was examined with a range of the solutions having different concentration series of the alkaline hydrogen peroxide. The solutions of the basic chromium sulphate were recycled for each installation system following the regeneration cycles. The chromium ions in effluent were quantitatively eluted, and satisfactory removal of chromium(III) and recovery of chromium(VI) were achieved.
- Open Access
- 1 January 2013
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 25 (12) , 6851-6855
Enrichment of Chromium(III) from Tannery Sludge in the Presence of Calcium
- 1 January 2013
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 25 (12) , 6851-6855
Open AccessEnrichment of Chromium(III) from Tannery Sludge in the Presence of Calcium
- 13 January 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (1) , 88-100
Cation Exchange Equilibria with Chromium (III) Species by Strong Acid Ion Exchangers
The exchange of hydrogen ions for trivalent chromium species with strongly acidic exchange resins has been investigated. The experiments comprised of systems with chromium chloride and basic chromium sulphate which are applied in leather tanning. Exchange equilibria at ambient temperature were investigated as a function of pH and total chromium concentration. Exchange strongly depends on the speciation in each system. As can be expected, with chromium chloride solutions a strong preference of chromium species occurs. However, a complete pattern is found for systems with basic chromium sulphate where chromium species are not fully preferred.
- 13 January 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (1) , 88-100
Cation Exchange Equilibria with Chromium (III) Species by Strong Acid Ion Exchangers
The exchange of hydrogen ions for trivalent chromium species with strongly acidic exchange resins has been investigated. The experiments comprised of systems with chromium chloride and basic chromium sulphate which are applied in leather tanning. Exchange equilibria at ambient temperature were investigated as a function of pH and total chromium concentration. Exchange strongly depends on the speciation in each system. As can be expected, with chromium chloride solutions a strong preference of chromium species occurs. However, a complete pattern is found for systems with basic chromium sulphate where chromium species are not fully preferred.