Touraj Taghikhany
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Touraj Taghikhany has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Arash Yeganeh Fallah
Department of Structural Engineering, Building and Housing Research Center (BHRC), Tehran
4 shared publications - Javad Amanabadi
Amirkabir University of Technology
3 shared publications Mohammad Mahdi Alinia
Amirkabir University of Technology
2 shared publications- Sadeq Kord
Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran
2 shared publications - Ahmad Sepehri
Department of Civil and Environmental Engineering Amirkabir University of Technology Tehran Iran
1 shared publication Ali Madadi
Department of Aerospace Engineering, Amirkabir University of Technology, Tehran, Iran
1 shared publication
Latest Publications
- 2 June 2026
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 37 (16) , 973-996
Modeling and impact of mechanical faults in MR dampers on the seismic performance of controlled structures
During earthquakes, faults in smart dampers can pose significant challenges to seismic control of structures. Although magnetorheological (MR) dampers are widely used, they remain vulnerable to both mechanical and electrical faults. This study investigates commonly observed defects in MR dampers and develops corresponding mathematical models based on experimental findings. The faulty damper models are then incorporated into a 20-story building to evaluate their effects on the performance of controlled structures and the effectiveness of different control strategies under seismic excitation. Two control algorithms—adaptive and optimal—are implemented, and their performances are evaluated under various fault scenarios. The results demonstrate that oil leakage levels of 5% and 10% considerably degrade damper efficiency. Moreover, defects such as particle trapping and orifice clogging cause approximately 30% and 50% increases in damper force output, respectively. Oil leakage faults result in the largest values of maximum displacements, velocities and base shear forces compared with particle trapping and orifice clogging faults. In contrast, particle trapping and orifice clogging faults lead to higher maximum accelerations. The adverse effects of faulty dampers on control performance depend on their location within the structure. A strong dependence is observed between ground motion characteristics and the resulting structural responses under these two fault types.
- 2 June 2026
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 37 (16) , 973-996
Modeling and impact of mechanical faults in MR dampers on the seismic performance of controlled structures
During earthquakes, faults in smart dampers can pose significant challenges to seismic control of structures. Although magnetorheological (MR) dampers are widely used, they remain vulnerable to both mechanical and electrical faults. This study investigates commonly observed defects in MR dampers and develops corresponding mathematical models based on experimental findings. The faulty damper models are then incorporated into a 20-story building to evaluate their effects on the performance of controlled structures and the effectiveness of different control strategies under seismic excitation. Two control algorithms—adaptive and optimal—are implemented, and their performances are evaluated under various fault scenarios. The results demonstrate that oil leakage levels of 5% and 10% considerably degrade damper efficiency. Moreover, defects such as particle trapping and orifice clogging cause approximately 30% and 50% increases in damper force output, respectively. Oil leakage faults result in the largest values of maximum displacements, velocities and base shear forces compared with particle trapping and orifice clogging faults. In contrast, particle trapping and orifice clogging faults lead to higher maximum accelerations. The adverse effects of faulty dampers on control performance depend on their location within the structure. A strong dependence is observed between ground motion characteristics and the resulting structural responses under these two fault types.
- Open Access
- 1 June 2026
- Published by MDPI AG in Big Data and Cognitive Computing
- Vol. 10 (6) , 177
Computationally Efficient Damage Detection in Liquid-Containing Tanks Using Coarse Finite Element Modeling and Genetic Algorithm–Based Feature Selection
Dataset-Based Damage Detection (DBDD) methods are effective for structures with geometric complexity, strong interaction effects, and operational variability, such as liquid-containing tanks with changing fluid levels. In many DBDD applications, accurate damage identification relies on high-fidelity numerical models and extensive simulations across numerous damage scenarios, which results in substantial computational cost. Although finite element modeling is well suited for these problems, fine-meshed models are computationally expensive, whereas coarse-meshed models can introduce errors in extracted dynamic features and reduce damage detection accuracy. This paper proposes an efficient DBDD framework that reduces computational demand while preserving detection reliability. A genetic algorithm is used to select a compact set of highly informative dynamic features that are extracted from a coarse-meshed finite element model and are suitable for training a machine-learning damage classification model. By combining a reduced-cost numerical model with an optimized feature set, the proposed approach decreases simulation time and database storage requirements while maintaining accurate damage prediction. The method is validated on a fluid-filled cylindrical tank under multiple fluid levels, demonstrating robust damage detection performance under simulated response variability (different FEM solvers, mesh sizes, ±5% material perturbations, and SNR 40–10 dB noise). These results indicate that the proposed framework is a practical and accurate solution for structural health monitoring of complex engineering systems.
- 1 June 2026
- Published by MDPI AG in Big Data and Cognitive Computing
- Vol. 10 (6) , 177
Open AccessComputationally Efficient Damage Detection in Liquid-Containing Tanks Using Coarse Finite Element Modeling and Genetic Algorithm–Based Feature Selection
Dataset-Based Damage Detection (DBDD) methods are effective for structures with geometric complexity, strong interaction effects, and operational variability, such as liquid-containing tanks with changing fluid levels. In many DBDD applications, accurate damage identification relies on high-fidelity numerical models and extensive simulations across numerous damage scenarios, which results in substantial computational cost. Although finite element modeling is well suited for these problems, fine-meshed models are computationally expensive, whereas coarse-meshed models can introduce errors in extracted dynamic features and reduce damage detection accuracy. This paper proposes an efficient DBDD framework that reduces computational demand while preserving detection reliability. A genetic algorithm is used to select a compact set of highly informative dynamic features that are extracted from a coarse-meshed finite element model and are suitable for training a machine-learning damage classification model. By combining a reduced-cost numerical model with an optimized feature set, the proposed approach decreases simulation time and database storage requirements while maintaining accurate damage prediction. The method is validated on a fluid-filled cylindrical tank under multiple fluid levels, demonstrating robust damage detection performance under simulated response variability (different FEM solvers, mesh sizes, ±5% material perturbations, and SNR 40–10 dB noise). These results indicate that the proposed framework is a practical and accurate solution for structural health monitoring of complex engineering systems.
- 30 March 2026
- Published by SAGE Publications in Journal of Vibration and Control
Damage detection in fluid-structure systems: A case study on cylindrical steel tank with varying fluid levels
Traditional damage detection methods often struggle to accurately identify structural damage in systems involving structure–fluid interaction, particularly in cylindrical tanks, which necessitate high-fidelity numerical models and present localization challenges complicated by structural symmetry and varying fluid levels. Dataset-based damage detection (DBDD) approaches offer promise but encounter challenges in accurate numerical modeling, effective pattern recognition, efficient handling of input and output vector, and managing computational and storage costs. This study introduces a practical procedure incorporating novel techniques for damage detection in a cylindrical tank with varying fluid levels. Initially, dynamic equations governing the structure–fluid interaction are developed and validated against experimental results. The finite elements (FE) method is then employed to model the tank under different fluid conditions. A new method is proposed to enhance pattern recognition algorithms by decomposition output vector followed by the application of a stacking ensemble for damage detection. To address computational and storage challenges, a hybrid feature engineering framework incorporating a novel methodology is proposed and implemented. The approach is validated on a 3D steel tank case study with varying fluid levels, demonstrating a significant reduction in FEM computational cost (by 27%) and storage requirements (by 75%), while achieving damage detection accuracies of 90% for clean datasets and 86.5% for noisy datasets.
- 30 March 2026
- Published by SAGE Publications in Journal of Vibration and Control
Damage detection in fluid-structure systems: A case study on cylindrical steel tank with varying fluid levels
Traditional damage detection methods often struggle to accurately identify structural damage in systems involving structure–fluid interaction, particularly in cylindrical tanks, which necessitate high-fidelity numerical models and present localization challenges complicated by structural symmetry and varying fluid levels. Dataset-based damage detection (DBDD) approaches offer promise but encounter challenges in accurate numerical modeling, effective pattern recognition, efficient handling of input and output vector, and managing computational and storage costs. This study introduces a practical procedure incorporating novel techniques for damage detection in a cylindrical tank with varying fluid levels. Initially, dynamic equations governing the structure–fluid interaction are developed and validated against experimental results. The finite elements (FE) method is then employed to model the tank under different fluid conditions. A new method is proposed to enhance pattern recognition algorithms by decomposition output vector followed by the application of a stacking ensemble for damage detection. To address computational and storage challenges, a hybrid feature engineering framework incorporating a novel methodology is proposed and implemented. The approach is validated on a 3D steel tank case study with varying fluid levels, demonstrating a significant reduction in FEM computational cost (by 27%) and storage requirements (by 75%), while achieving damage detection accuracies of 90% for clean datasets and 86.5% for noisy datasets.
- 1 October 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (10) , 105002
Structural damage detection by multi-setup sensing: a direct data-driven approach
Implementing structural health monitoring systems on civil structures using a multi-setup sensing system presents significant advantages over fixed single-setup systems. The latter, which requires many sensors, can be exhaustive and financially infeasible. However, conventional multi-setup methods for damage detection are limited by their reliance on global mode shape identification from local modes, which lacks sensitivity to damage. This study introduces a novel data-driven multi-setup framework that bypasses traditional modal identification. Instead, it employs a two-stage convolutional neural network (CNN) approach: the first stage learns local damage-sensitive features from individual setups, while the second combines these features across different setups to directly detect structural damage from raw data. The proposed framework has been applied to both an experimental and a real-world structure, and its results have been compared with those of single-setup models. For the experimental structure, the multi-setup approach has improved the accuracy of 1D CNN and 3D CNN models by an average of 42% and 13% respectively, compared to its single-setup counterparts. The multi-setup 3D CNN model achieved an accuracy nearly matching state-of-the-art performance, despite having five times fewer simultaneous measurements on the same dataset. Moreover, for the real structure, the multi-setup approach improved accuracy by 83% compared to the best single-setup model.
- 1 October 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (10) , 105002
Structural damage detection by multi-setup sensing: a direct data-driven approach
Implementing structural health monitoring systems on civil structures using a multi-setup sensing system presents significant advantages over fixed single-setup systems. The latter, which requires many sensors, can be exhaustive and financially infeasible. However, conventional multi-setup methods for damage detection are limited by their reliance on global mode shape identification from local modes, which lacks sensitivity to damage. This study introduces a novel data-driven multi-setup framework that bypasses traditional modal identification. Instead, it employs a two-stage convolutional neural network (CNN) approach: the first stage learns local damage-sensitive features from individual setups, while the second combines these features across different setups to directly detect structural damage from raw data. The proposed framework has been applied to both an experimental and a real-world structure, and its results have been compared with those of single-setup models. For the experimental structure, the multi-setup approach has improved the accuracy of 1D CNN and 3D CNN models by an average of 42% and 13% respectively, compared to its single-setup counterparts. The multi-setup 3D CNN model achieved an accuracy nearly matching state-of-the-art performance, despite having five times fewer simultaneous measurements on the same dataset. Moreover, for the real structure, the multi-setup approach improved accuracy by 83% compared to the best single-setup model.
- 21 January 2025
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 32 (7-8) , 1303-1317
Enhancing structural damage detection: A comprehensive study on feature engineering and hyperparameters for pattern recognition algorithms
One of the appealing alternatives, especially for detect, localize, and quantify the multiple simultaneously damages in structures, is using dataset-based damage detection (DBDD) technics. While machine learning (ML) algorithms have been applied to pattern recognition in DBDD studies, comprehensive research and sensitivity analysis on the effects of various parameters, such as ML algorithm choice, hyperparameter (HP) tuning, and feature engineering techniques, remain limited. This can hinder the selection of optimal parameter values, especially for large structures, without incurring significant computational costs. This study addresses this gap by employing extensive single-objective sensitivity analyses to evaluate the impact of these parameters on DBDD damage detection in a 3D sample structure, whose numerical model has been verified by comparing its Frequency Response Functions (FRFs) with experimental data. By comparing grid search outcomes, it was shown that leveraging insights from single-objective optimization can significantly reduce computational costs by limiting the parameter search space. Additionally, an innovative hybrid feature engineering method is proposed to enhance feature quality, reduce dataset size, and enable the feasibility of conducting extensive sensitivity analyses. Furthermore, the study investigates the impact of ensemble techniques with tuned algorithms and excitation point configuration on DBDD prediction accuracy. By using proposed feature engineering, optimal excitation configuration, optimized ML algorithms and HPs, in addition to shrinking the dataset to 5% of its original size, the accuracy of DBDD damage prediction can be improved by up to 60%. These results can be leveraged to pre-select optimal parameters for DBDD damage detection in similar structures, significantly reducing computational costs and improving accuracy.
- 21 January 2025
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 32 (7-8) , 1303-1317
Enhancing structural damage detection: A comprehensive study on feature engineering and hyperparameters for pattern recognition algorithms
One of the appealing alternatives, especially for detect, localize, and quantify the multiple simultaneously damages in structures, is using dataset-based damage detection (DBDD) technics. While machine learning (ML) algorithms have been applied to pattern recognition in DBDD studies, comprehensive research and sensitivity analysis on the effects of various parameters, such as ML algorithm choice, hyperparameter (HP) tuning, and feature engineering techniques, remain limited. This can hinder the selection of optimal parameter values, especially for large structures, without incurring significant computational costs. This study addresses this gap by employing extensive single-objective sensitivity analyses to evaluate the impact of these parameters on DBDD damage detection in a 3D sample structure, whose numerical model has been verified by comparing its Frequency Response Functions (FRFs) with experimental data. By comparing grid search outcomes, it was shown that leveraging insights from single-objective optimization can significantly reduce computational costs by limiting the parameter search space. Additionally, an innovative hybrid feature engineering method is proposed to enhance feature quality, reduce dataset size, and enable the feasibility of conducting extensive sensitivity analyses. Furthermore, the study investigates the impact of ensemble techniques with tuned algorithms and excitation point configuration on DBDD prediction accuracy. By using proposed feature engineering, optimal excitation configuration, optimized ML algorithms and HPs, in addition to shrinking the dataset to 5% of its original size, the accuracy of DBDD damage prediction can be improved by up to 60%. These results can be leveraged to pre-select optimal parameters for DBDD damage detection in similar structures, significantly reducing computational costs and improving accuracy.
- 19 March 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 67 (4) , 1-21
A novel triple-structure coding to use evolutionary algorithms for optimal sensor placement integrated with modal identification
- 19 March 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 67 (4) , 1-21
A novel triple-structure coding to use evolutionary algorithms for optimal sensor placement integrated with modal identification
- Open Access
- 21 December 2021
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 37 (11) , 1402-1416
Seismic adaptive control of building structures with simultaneous sensor and damper faults based on dynamic neural network
- 21 December 2021
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 37 (11) , 1402-1416
Open AccessSeismic adaptive control of building structures with simultaneous sensor and damper faults based on dynamic neural network
- 1 December 2021
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 31 (5) , e1915
Parametric system identification of large‐scale structure using decoupled synchronized signals
Summary: Large‐scale structures are subjected to environmental loads or frequent seismic motion with irremediable effect. These loads have often multidirectional actions on structures, and it couples their responses and leads to multiple‐input multiple‐output (MIMO) problem. The complexity of MIMO model and the relative time‐delays in sensing networks are among major sources of error in dynamic properties identification in large scale structures. This study proposed a parametric‐time domain method to reduce the negative effect of these problems. For this purpose, the contribution of each input in the output signals is determined using QR decomposition and converts a MIMO problem into multiple single‐input multiple‐output (SIMO) ones. In this regard, an Autoregressive Moving Average with eXogenous (ARMAX) model is implemented on decoupled signals for modal identification. Further, for time synchronization of records, a cross‐correlation function has been used to achieve more precise results. The method was employed real strong‐motion response recorded by different sensors at a high rise 64‐story concrete building. Results demonstrate the promising precision of the proposed algorithm for identifying current structural modal properties under real earthquake excitations. Hence, structures can be monitored efficiently along seismic experiences to detect any possible variations in their structural features. The comparison between the output of the proposed method and previous study indicates a considerable improvement on accuracy of the estimated model property particularly on mode shapes.
- 1 December 2021
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 31 (5) , e1915
Parametric system identification of large‐scale structure using decoupled synchronized signals
Summary: Large‐scale structures are subjected to environmental loads or frequent seismic motion with irremediable effect. These loads have often multidirectional actions on structures, and it couples their responses and leads to multiple‐input multiple‐output (MIMO) problem. The complexity of MIMO model and the relative time‐delays in sensing networks are among major sources of error in dynamic properties identification in large scale structures. This study proposed a parametric‐time domain method to reduce the negative effect of these problems. For this purpose, the contribution of each input in the output signals is determined using QR decomposition and converts a MIMO problem into multiple single‐input multiple‐output (SIMO) ones. In this regard, an Autoregressive Moving Average with eXogenous (ARMAX) model is implemented on decoupled signals for modal identification. Further, for time synchronization of records, a cross‐correlation function has been used to achieve more precise results. The method was employed real strong‐motion response recorded by different sensors at a high rise 64‐story concrete building. Results demonstrate the promising precision of the proposed algorithm for identifying current structural modal properties under real earthquake excitations. Hence, structures can be monitored efficiently along seismic experiences to detect any possible variations in their structural features. The comparison between the output of the proposed method and previous study indicates a considerable improvement on accuracy of the estimated model property particularly on mode shapes.