Qiang Yin
Research Subjects
Research Interests
Qiang Yin has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Qinjian Yin
College of Chemistry, Sichuan University, Chengdu 610064, China
4 shared publications Kai Du
Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang, P. R. China
3 shared publicationsYawen Huang
3 shared publicationsYihan Wang
College of Chemistry, Sichuan University, Chengdu, P. R. China
3 shared publicationsHuan Hu
State Key Laboratory of Environmental-friendly Energy Materials, School of Material Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, P. R. China
2 shared publicationsJie Li
2 shared publications
Latest Publications
- 17 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10, 226-230
Research on single-phase bidirectional AC/DC converter based on H6 topology
Facing the market environment of carbon peaking and carbon neutrality, with the increasing demand for bidirectional charging and discharging module, combined with the advantages of transformerless photovoltaic grid-connected system, a single-phase bidirectional AC/DC converter based on H6 topology is proposed. Firstly, based on the traditional H6 topology, the working principles of rectifier and inverter are analyzed., and the driving modulation method of power switch is given to realize the bidirectional energy flow between power grid and DC bus. Then, aiming at the constant current control mode of grid connected current and battery current, a variable mode control strategy based on the control object is proposed, and the design idea of loop controller is given. Finally, the simulation platform of the proposed converter is built, and the theoretical analysis results are verified. The results show that the converter can not only ensure the quality of grid connected inverter, but also meet the demand of rectifier charging, which provides a modulation method and control strategy for the development of multi port converter based on DC bus.
- 17 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10, 226-230
Research on single-phase bidirectional AC/DC converter based on H6 topology
Facing the market environment of carbon peaking and carbon neutrality, with the increasing demand for bidirectional charging and discharging module, combined with the advantages of transformerless photovoltaic grid-connected system, a single-phase bidirectional AC/DC converter based on H6 topology is proposed. Firstly, based on the traditional H6 topology, the working principles of rectifier and inverter are analyzed., and the driving modulation method of power switch is given to realize the bidirectional energy flow between power grid and DC bus. Then, aiming at the constant current control mode of grid connected current and battery current, a variable mode control strategy based on the control object is proposed, and the design idea of loop controller is given. Finally, the simulation platform of the proposed converter is built, and the theoretical analysis results are verified. The results show that the converter can not only ensure the quality of grid connected inverter, but also meet the demand of rectifier charging, which provides a modulation method and control strategy for the development of multi port converter based on DC bus.
- 25 January 2021
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 42 (4) , 2000617
A Toughening and Anti‐Counterfeiting Benzotriazole‐Based High‐Performance Polymer Film Driven by Appropriate Intermolecular Coordination Force
It is of great significance to circumvent the inherent trade‐off between strength and extensibility for epoxy resins. Herein dynamic Cu‐benzotriazole cross‐links are incorporated, as the appropriate intermolecular coordination interaction, into high performance epoxy networks, and the resulting epoxy resins exhibits outstanding thermal stability and mechanical properties, their strength and extensibility are simultaneously improved. Additionally, local manipulation of coordination crosslinking confers the film with anti‐counterfeiting function.
- 25 January 2021
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 42 (4) , 2000617
A Toughening and Anti‐Counterfeiting Benzotriazole‐Based High‐Performance Polymer Film Driven by Appropriate Intermolecular Coordination Force
It is of great significance to circumvent the inherent trade‐off between strength and extensibility for epoxy resins. Herein dynamic Cu‐benzotriazole cross‐links are incorporated, as the appropriate intermolecular coordination interaction, into high performance epoxy networks, and the resulting epoxy resins exhibits outstanding thermal stability and mechanical properties, their strength and extensibility are simultaneously improved. Additionally, local manipulation of coordination crosslinking confers the film with anti‐counterfeiting function.
- 12 October 2020
- Published by Springer Nature in Macromolecular Research
- Vol. 28 (11) , 973-978
Thermoelectric Properties of Polypyrrole Nanotubes
- 12 October 2020
- Published by Springer Nature in Macromolecular Research
- Vol. 28 (11) , 973-978
Thermoelectric Properties of Polypyrrole Nanotubes
- 15 February 2020
- Published by Springer Nature in Journal of Porous Materials
- Vol. 27 (3) , 883-891
Pt-Al2O3 composite aerogels via solution-freeze-drying-calcination technology for the thermal decomposition of ammonium perchlorate
- 15 February 2020
- Published by Springer Nature in Journal of Porous Materials
- Vol. 27 (3) , 883-891
Pt-Al2O3 composite aerogels via solution-freeze-drying-calcination technology for the thermal decomposition of ammonium perchlorate
- Open Access
- 1 February 2020
- Published by Elsevier in Data in Brief
- Vol. 28, 104849
Supporting data for the photo-induced deformation behavior for AZO-containing polymers connected by hydrogen bonding
- 1 February 2020
- Published by Elsevier in Data in Brief
- Vol. 28, 104849
Open AccessSupporting data for the photo-induced deformation behavior for AZO-containing polymers connected by hydrogen bonding
- 1 January 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (4) , 2925-2935
Effects of poly(vinyl alcohol) and poly(acrylic acid) on interfacial properties and stability of compound droplets
- 1 January 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (4) , 2925-2935
Effects of poly(vinyl alcohol) and poly(acrylic acid) on interfacial properties and stability of compound droplets
- Open Access
- 17 December 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (71) , 41943-41954
Effects of surfactant adsorption on the formation of compound droplets in microfluidic devices
Profile of neck width versus the relative time during the formation process of W1/O droplets.
- 17 December 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (71) , 41943-41954
Open AccessEffects of surfactant adsorption on the formation of compound droplets in microfluidic devices
Profile of neck width versus the relative time during the formation process of W1/O droplets.
- 16 July 2019
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 10 (33) , 4551-4560
Benzocyclobutene-functional double-decker silsesquioxane: self-assembled hybrid resin for high-performance dielectrics and LED encapsulants
The optoelectronic industry is focused on developing new electronic packaging materials to improve the performance of optoelectronic devices. In this paper, two novel benzocyclobutene-functional double-decker silsesquioxane macromonomers (2BCB-DDSQ and 4BCB-DDSQ) were synthesized via hydrolysis of phenyltrimethylsilane followed by hydrolytic condensation and platinum-catalyzed hydrosilylation. The resulting cured resins, thermally cured from viscous macromonomers by a solvent-free process, had high thermal stability and excellent optical and electrical properties compared with those features of a resin cured without DDSQ. Compared with the crosslinked porous microstructure of p-2BCB-DDSQ, we observed an orderly assembled structure, which was well dispersed in p-4BCB-DDSQ. We further used computer simulations to analyze these self-assembled hybrids, formed by π–π stacking and intramolecular/intermolecular crosslinking reactions. The unique microstructure of p-4BCB-DDSQ showed better performance compared to that of p-2BCB-DDSQ in terms of its low dielectric constant, low water uptake, high heat transfer rate, and high LED luminous efficiency. Hence, this material has potential applications in high-performance electronic packaging materials.
- 16 July 2019
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 10 (33) , 4551-4560
Benzocyclobutene-functional double-decker silsesquioxane: self-assembled hybrid resin for high-performance dielectrics and LED encapsulants
The optoelectronic industry is focused on developing new electronic packaging materials to improve the performance of optoelectronic devices. In this paper, two novel benzocyclobutene-functional double-decker silsesquioxane macromonomers (2BCB-DDSQ and 4BCB-DDSQ) were synthesized via hydrolysis of phenyltrimethylsilane followed by hydrolytic condensation and platinum-catalyzed hydrosilylation. The resulting cured resins, thermally cured from viscous macromonomers by a solvent-free process, had high thermal stability and excellent optical and electrical properties compared with those features of a resin cured without DDSQ. Compared with the crosslinked porous microstructure of p-2BCB-DDSQ, we observed an orderly assembled structure, which was well dispersed in p-4BCB-DDSQ. We further used computer simulations to analyze these self-assembled hybrids, formed by π–π stacking and intramolecular/intermolecular crosslinking reactions. The unique microstructure of p-4BCB-DDSQ showed better performance compared to that of p-2BCB-DDSQ in terms of its low dielectric constant, low water uptake, high heat transfer rate, and high LED luminous efficiency. Hence, this material has potential applications in high-performance electronic packaging materials.
- 21 May 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (38)
Multiple morphologies of a poly(methyl methacrylate)‐block‐poly(N,N‐dimethyl aminoethyl methacrylate) copolymer with pH‐responsiveness and thermoresponsiveness
We successfully prepared a series of pH‐responsive and thermoresponsive poly(methyl methacrylate) (PMMA)‐block‐poly(N,N‐dimethyl aminoethyl methacrylate (PDMAEMA) copolymers via reversible addition–fragmentation chain‐transfer polymerization with PMMA as a macro chain‐transfer agent. Control over the chain length of PDMAEMA allowed the morphological transformation of PMMA‐b‐PDMAEMA. The critical water content and critical micelle concentration also depended on the length of the PDMAEMA block. UV–visible and fluorescence spectrum analyses indicated that the PMMA‐b‐PDMAEMA copolymer exhibited a lower critical solution temperature type phase transition in water. The particle size of PMMA‐b‐PDMAEMA was dominated by the pH value, as evidenced by dynamic light scattering and transmission electron microscopy. In addition, the PMMA‐b‐PDMAEMA copolymers exhibited good reversible thermoresponsive behavior between 33 and 38°C. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47972.
- 21 May 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (38)
Multiple morphologies of a poly(methyl methacrylate)‐block‐poly(N,N‐dimethyl aminoethyl methacrylate) copolymer with pH‐responsiveness and thermoresponsiveness
We successfully prepared a series of pH‐responsive and thermoresponsive poly(methyl methacrylate) (PMMA)‐block‐poly(N,N‐dimethyl aminoethyl methacrylate (PDMAEMA) copolymers via reversible addition–fragmentation chain‐transfer polymerization with PMMA as a macro chain‐transfer agent. Control over the chain length of PDMAEMA allowed the morphological transformation of PMMA‐b‐PDMAEMA. The critical water content and critical micelle concentration also depended on the length of the PDMAEMA block. UV–visible and fluorescence spectrum analyses indicated that the PMMA‐b‐PDMAEMA copolymer exhibited a lower critical solution temperature type phase transition in water. The particle size of PMMA‐b‐PDMAEMA was dominated by the pH value, as evidenced by dynamic light scattering and transmission electron microscopy. In addition, the PMMA‐b‐PDMAEMA copolymers exhibited good reversible thermoresponsive behavior between 33 and 38°C. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47972.
- 11 January 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (18)
Materials containing benzocyclobutene units with low dielectric constant and good thermostability prepared from star‐shaped molecules
With the development of ultralarge‐scale integrated circuits, polymers with low dielectric constant and high thermal stability have aroused great interest. We prepared two novel bridged siloxane‐based benzocyclobutene (BCB) star‐shaped monomers, tetrakis[dimethyl siloxy‐4‐(1′,1′‐dimethyl‐1′‐ethyl silicon)‐benzocyclobutene] (TDSDES‐BCB) and tetrakis(hexamethyl siloxane vinyl‐benzocyclobutene) (THSV‐BCB), and the corresponding resins were obtained by curing. The structures of TDSDES‐BCB and THSV‐BCB were confirmed by 1H‐NMR, 13C‐NMR, and 29Si‐NMR spectra and time‐of‐flight mass spectrometry analysis. The curing behavior of these monomers was investigated by Fourier transform infrared spectroscopy and differential scanning calorimetry. The dielectric constant of cured TDSDES‐BCB is only 2.43 at 10 MHz (that of THSV‐BCB is 2.46). In addition, these resins display high thermal stability: the 5 wt % weight loss temperature of cured TDSDES‐BCB is about 467 °C (454 °C for THSV‐BCB resin). The excellent low dielectric property is attributable to the free volume created by the star‐shaped structure and crosslinked network structure of BCB after curing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47458.
- 11 January 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (18)
Materials containing benzocyclobutene units with low dielectric constant and good thermostability prepared from star‐shaped molecules
With the development of ultralarge‐scale integrated circuits, polymers with low dielectric constant and high thermal stability have aroused great interest. We prepared two novel bridged siloxane‐based benzocyclobutene (BCB) star‐shaped monomers, tetrakis[dimethyl siloxy‐4‐(1′,1′‐dimethyl‐1′‐ethyl silicon)‐benzocyclobutene] (TDSDES‐BCB) and tetrakis(hexamethyl siloxane vinyl‐benzocyclobutene) (THSV‐BCB), and the corresponding resins were obtained by curing. The structures of TDSDES‐BCB and THSV‐BCB were confirmed by 1H‐NMR, 13C‐NMR, and 29Si‐NMR spectra and time‐of‐flight mass spectrometry analysis. The curing behavior of these monomers was investigated by Fourier transform infrared spectroscopy and differential scanning calorimetry. The dielectric constant of cured TDSDES‐BCB is only 2.43 at 10 MHz (that of THSV‐BCB is 2.46). In addition, these resins display high thermal stability: the 5 wt % weight loss temperature of cured TDSDES‐BCB is about 467 °C (454 °C for THSV‐BCB resin). The excellent low dielectric property is attributable to the free volume created by the star‐shaped structure and crosslinked network structure of BCB after curing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47458.