Boris Orel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Boris Orel has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
Angela Šurca Vuk
Natl Inst Chem, SI-1000 Ljubljana, Slovenia
5 shared publicationsA. Šurca Vuk
National Institute of Chemistry
4 shared publications- Barbara Simončič
Department of Textiles, Faculty of Natural Sciences and Engineering, University of Ljubljana, Aškerčeva 12, 1000 Ljubljana, Slovenia
4 shared publications Brigita Tomšič
University of Ljubljana
4 shared publications- Ivan Jerman
National Institute of Chemistry, Ljubljana, Slovenia
4 shared publications Janez Kovač
Institut Jožef Stefan
3 shared publications
Latest Publications
- 26 July 2015
- Published by Springer Nature in Cellulose
- Vol. 22 (5) , 3441-3463
Bacteriostatic photocatalytic properties of cotton modified with TiO2 and TiO2/aminopropyltriethoxysilane
- 26 July 2015
- Published by Springer Nature in Cellulose
- Vol. 22 (5) , 3441-3463
Bacteriostatic photocatalytic properties of cotton modified with TiO2 and TiO2/aminopropyltriethoxysilane
- 1 January 2014
- Vol. 61 (3) , 517-29
Foil-based TiO2/gel electrolyte/Ni1-xO electrochromic device made of electrochromic pigment coatings.
Thin electrochromic coatings were obtained by co-grinding the mTiA particle aggregates (300 nm in size) with open-corner heptaisobutyl trisilanol POSS (T(8) IB(7)(OH)(3) POSS) acting as dispersant. After the addition of titanium tetraisopropoxide (3-5%) the mTiA pigment dispersion was deposited on FTO glass and plastic ITO PET foils and coatings were obtained by thermal treatment at 150 °C. Optical transmittance and luminous haze from 2 to 6% of the coatings were determined from the corresponding UV-Vis spectra. The achieved electrochromic effect was evaluated by electrochemical charging/discharging in 1 M LiClO(4)/PC electrolyte. Results revealed that the colouring/bleaching changes depended on the extent of grinding and the size of the milling zirconia beads, enabling to distinguish between the surface charging of the mTiA grains and the filling and emptying of the anatase density of states. mTiA pigment coatings deposited on plastic foil were used in combination with Ni(1-x)O pigment coatings for construction of foil-based electrochromic device employing novel gel electrolyte with ionic liquid co-solvent.
- 1 January 2014
- Vol. 61 (3) , 517-29
Foil-based TiO2/gel electrolyte/Ni1-xO electrochromic device made of electrochromic pigment coatings.
Thin electrochromic coatings were obtained by co-grinding the mTiA particle aggregates (300 nm in size) with open-corner heptaisobutyl trisilanol POSS (T(8) IB(7)(OH)(3) POSS) acting as dispersant. After the addition of titanium tetraisopropoxide (3-5%) the mTiA pigment dispersion was deposited on FTO glass and plastic ITO PET foils and coatings were obtained by thermal treatment at 150 °C. Optical transmittance and luminous haze from 2 to 6% of the coatings were determined from the corresponding UV-Vis spectra. The achieved electrochromic effect was evaluated by electrochemical charging/discharging in 1 M LiClO(4)/PC electrolyte. Results revealed that the colouring/bleaching changes depended on the extent of grinding and the size of the milling zirconia beads, enabling to distinguish between the surface charging of the mTiA grains and the filling and emptying of the anatase density of states. mTiA pigment coatings deposited on plastic foil were used in combination with Ni(1-x)O pigment coatings for construction of foil-based electrochromic device employing novel gel electrolyte with ionic liquid co-solvent.
- 1 February 2013
- Published by Springer Nature in Cellulose
- Vol. 20 (1) , 277-289
The surface modification of cellulose fibres to create super-hydrophobic, oleophobic and self-cleaning properties
- 1 February 2013
- Published by Springer Nature in Cellulose
- Vol. 20 (1) , 277-289
The surface modification of cellulose fibres to create super-hydrophobic, oleophobic and self-cleaning properties
- 1 April 2012
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 99, 14-25
Electrochromic properties of Ni(1−x)O and composite Ni(1−x)O-polyaniline thin films prepared by the peroxo soft chemistry route
- 1 April 2012
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 99, 14-25
Electrochromic properties of Ni(1−x)O and composite Ni(1−x)O-polyaniline thin films prepared by the peroxo soft chemistry route
- 30 November 2011
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 95 (11) , 2965-2975
Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers
- 30 November 2011
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 95 (11) , 2965-2975
Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers
- 29 November 2011
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 61 (2) , 340-354
Multifunctional water and oil repellent and antimicrobial properties of finished cotton: influence of sol–gel finishing procedure
- 29 November 2011
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 61 (2) , 340-354
Multifunctional water and oil repellent and antimicrobial properties of finished cotton: influence of sol–gel finishing procedure
- 1 January 2010
- Vol. 57 (4) , 855-865
Infrared Spectroscopic and Conductivity Studies of Ureasil-Based Proton Conducting Membranes for Medium Temperature Fuel Cell Applications
Proton conducting membranes for fuel cells were prepared by the sol-gel process from two different ureasil organic-inorganic hybrid precursors: bis[(N-(3-triethoxysilylpropyl)ureido]-terminated poly(propylene glycol) 4000 (PPGU) and bis[3-(N-(3-triethoxysilylpropyl)ureido)Propyl]-terminated poly(dimethylsiloxane) 1000 (PDMSU). Heteropoly silicotungstic acid was added to actuate the reactions of hydrolysis and condensation and to introduce proton conductivity. XRD measurements of membranes revealed the presence of a diffraction peak at 6.3 degrees, which could be ascribed to gradual formation of R-(SiO3/2) silsesquioxane clusters, i.e. arrangement of the Si-O-Si skeleton on the nano-scale. TO and DSC measurements showed thermal stability of the membranes above 120 degrees C. Proton conductivities at room temperature were of the order of 10(-4) to 10(-3) S/cm, classifying the membranes in the group of super ionic conductors. At elevated temperatures up to 160 degrees C and at conditions of autogenous pressure, conductivities increased up to values acceptable for fuel cells of 10(-1) S/cm, which could be the result of the presence of H3O+ ions. The protonation of the urea groups and the formation of amidonium ions [C(OH)=NH+] were followed using IR ATR spectroscopy.
- 1 January 2010
- Vol. 57 (4) , 855-865
Infrared Spectroscopic and Conductivity Studies of Ureasil-Based Proton Conducting Membranes for Medium Temperature Fuel Cell Applications
Proton conducting membranes for fuel cells were prepared by the sol-gel process from two different ureasil organic-inorganic hybrid precursors: bis[(N-(3-triethoxysilylpropyl)ureido]-terminated poly(propylene glycol) 4000 (PPGU) and bis[3-(N-(3-triethoxysilylpropyl)ureido)Propyl]-terminated poly(dimethylsiloxane) 1000 (PDMSU). Heteropoly silicotungstic acid was added to actuate the reactions of hydrolysis and condensation and to introduce proton conductivity. XRD measurements of membranes revealed the presence of a diffraction peak at 6.3 degrees, which could be ascribed to gradual formation of R-(SiO3/2) silsesquioxane clusters, i.e. arrangement of the Si-O-Si skeleton on the nano-scale. TO and DSC measurements showed thermal stability of the membranes above 120 degrees C. Proton conductivities at room temperature were of the order of 10(-4) to 10(-3) S/cm, classifying the membranes in the group of super ionic conductors. At elevated temperatures up to 160 degrees C and at conditions of autogenous pressure, conductivities increased up to values acceptable for fuel cells of 10(-1) S/cm, which could be the result of the presence of H3O+ ions. The protonation of the urea groups and the formation of amidonium ions [C(OH)=NH+] were followed using IR ATR spectroscopy.
- 6 August 2008
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 37,p. 5072-5075
Synthesis of polyhedral phenylsilsesquioxanes with KF as the source of the fluoride ion
An alternative method for the preparation of polyhedral phenylsilsesquioxanes is reported. Phenylsilsesquioxane resin and freshly hydrolysed phenyltrimethoxysilane was refluxed with various phase-transfer catalysts and potassium fluoride in toluene yielding octaphenylsilsesquioxane, or in a mixture of THF and ethanol yielding dodecaphenylsilsesquioxane.
- 6 August 2008
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 37,p. 5072-5075
Synthesis of polyhedral phenylsilsesquioxanes with KF as the source of the fluoride ion
An alternative method for the preparation of polyhedral phenylsilsesquioxanes is reported. Phenylsilsesquioxane resin and freshly hydrolysed phenyltrimethoxysilane was refluxed with various phase-transfer catalysts and potassium fluoride in toluene yielding octaphenylsilsesquioxane, or in a mixture of THF and ethanol yielding dodecaphenylsilsesquioxane.
- 28 March 2008
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 47 (1) , 44-57
Sol–gel coating of cellulose fibres with antimicrobial and repellent properties
- 28 March 2008
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 47 (1) , 44-57
Sol–gel coating of cellulose fibres with antimicrobial and repellent properties
- 31 August 2007
- Published by Elsevier in Electrochemistry Communications
- Vol. 9 (8) , 2062-2066
Electrochemical and in-situ Raman spectroelectrochemical study of 1-methyl-3-propylimidazolium iodide ionic liquid with added iodine
- 31 August 2007
- Published by Elsevier in Electrochemistry Communications
- Vol. 9 (8) , 2062-2066
Electrochemical and in-situ Raman spectroelectrochemical study of 1-methyl-3-propylimidazolium iodide ionic liquid with added iodine