Erion Gjonaj
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Erion Gjonaj has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Herbert De Gersem
Institute for Accelerator Science and Electromagnetic Fields, Technical University of Darmstadt, Darmstadt, Germany
7 shared publications - Thomas Weiland
Technische Universität Darmstadt
3 shared publications - Thomas Weiland
Technische Universität Darmstadt
3 shared publications - Yvonne Späck-Leigsnering
Robert Bosch GmbH
3 shared publications - Maren Greta Ruppert
Tehniška univerza v Darmstadtu, Inštitut za znanost o pospeševalnikih in elektromagnetnih poljih (TEMF)
2 shared publications - Shahnam Gorgi Zadeh
Institute of General Electrical Engineering, University of Rostock, 18059 Rostock, Germany
2 shared publications
Latest Publications
- Open Access
- 21 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 2629
Accurate modelling of intrabeam scattering and its impact on photoinjectors for free-electron lasers
Intrabeam scattering (IBS) is a fundamental effect that can limit the performance of high-brightness electron machines but has so far been neglected in standard modeling of RF photoinjectors. Recent measurements at SwissFEL show that the slice energy spread (SES) in the injector is significantly underestimated in standard beam dynamic simulations. In this paper, we employ a dedicated Monte Carlo simulation model that accurately predicts IBS-induced SES growth in the photoinjector of an X-ray free-electron laser. The simulations are benchmarked against SES measurements at the SwissFEL and are supported by a new analytical model. The results show that IBS-induced SES growth occurs throughout the injector, most prominently in the electron source, and must be included in performance assessments. We further demonstrate that while 5D brightness is largely conserved, the 6D brightness degrades with propagation, highlighting the need to account for IBS in accurate photoinjector design and optimization.
- 21 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 2629
Open AccessAccurate modelling of intrabeam scattering and its impact on photoinjectors for free-electron lasers
Intrabeam scattering (IBS) is a fundamental effect that can limit the performance of high-brightness electron machines but has so far been neglected in standard modeling of RF photoinjectors. Recent measurements at SwissFEL show that the slice energy spread (SES) in the injector is significantly underestimated in standard beam dynamic simulations. In this paper, we employ a dedicated Monte Carlo simulation model that accurately predicts IBS-induced SES growth in the photoinjector of an X-ray free-electron laser. The simulations are benchmarked against SES measurements at the SwissFEL and are supported by a new analytical model. The results show that IBS-induced SES growth occurs throughout the injector, most prominently in the electron source, and must be included in performance assessments. We further demonstrate that while 5D brightness is largely conserved, the 6D brightness degrades with propagation, highlighting the need to account for IBS in accurate photoinjector design and optimization.
- Open Access
Accurate Modelling of Intrabeam Scattering and its Impact on Photoinjectors for Free-Electron Lasers
Intrabeam scattering (IBS) is a fundamental effect that can limit the performance of high-brightness electron machines, yet it has so far been neglected in standard modelling of RF photoinjectors. Recent measurements at SwissFEL reveal that the slice energy spread (SES) in the injector is significantly underestimated by conventional tracking codes. In this work, we present a dedicated Monte Carlo simulation model that accurately predicts the IBS-induced SES growth in the photoinjector of an X-ray free-electron laser. The simulations are benchmarked against SES measurements at the SwissFEL as well as theoretically supported by a new analytical model. The results demonstrate that IBS-induced SES growth occurs throughout the injector, most prominently in the electron source, and must be taken into account when assessing photoinjector performance. We further show that while the 5D brightness is largely conserved, the 6D brightness undergoes notable degradation with propagation, underscoring the need to include IBS in the accurate design and optimization of photoinjectors.
Open AccessAccurate Modelling of Intrabeam Scattering and its Impact on Photoinjectors for Free-Electron Lasers
Intrabeam scattering (IBS) is a fundamental effect that can limit the performance of high-brightness electron machines, yet it has so far been neglected in standard modelling of RF photoinjectors. Recent measurements at SwissFEL reveal that the slice energy spread (SES) in the injector is significantly underestimated by conventional tracking codes. In this work, we present a dedicated Monte Carlo simulation model that accurately predicts the IBS-induced SES growth in the photoinjector of an X-ray free-electron laser. The simulations are benchmarked against SES measurements at the SwissFEL as well as theoretically supported by a new analytical model. The results demonstrate that IBS-induced SES growth occurs throughout the injector, most prominently in the electron source, and must be taken into account when assessing photoinjector performance. We further show that while the 5D brightness is largely conserved, the 6D brightness undergoes notable degradation with propagation, underscoring the need to include IBS in the accurate design and optimization of photoinjectors.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
Hybrid Transmission Conditions for the Schwarz Domain Decomposition Method for RF Accelerating Cavities
We introduce a new transmission condition for the domain decomposition method with application in particle accelerator problems. The new transmission condition combines a modal decomposition approach for guided-wave propagation with the commonly used approximate transmission conditions. This significantly improves the convergence properties of the domain decomposition method for these structures. As an important application, we consider the parallel computation of electromagnetic fields in a 1.3 GHz Tesla cavity on an HPC cluster. This example demonstrates the accuracy of the method and its improvement of computational efficiency.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
Hybrid Transmission Conditions for the Schwarz Domain Decomposition Method for RF Accelerating Cavities
We introduce a new transmission condition for the domain decomposition method with application in particle accelerator problems. The new transmission condition combines a modal decomposition approach for guided-wave propagation with the commonly used approximate transmission conditions. This significantly improves the convergence properties of the domain decomposition method for these structures. As an important application, we consider the parallel computation of electromagnetic fields in a 1.3 GHz Tesla cavity on an HPC cluster. This example demonstrates the accuracy of the method and its improvement of computational efficiency.
- Open Access
- 6 January 2023
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 26 (1) , 014601
Influence of vacuum chamber port terminations on beam coupling impedances
Vacuum chambers of particle accelerators are typically equipped with radio-frequency couplers. The couplers are employed to excite modes for particle acceleration, to extract the energy of higher-order modes, or for diagnostic purposes. From a network theory perspective, these couplers represent terminal ports by which means the structure can exchange energy with its exterior. Usually, these ports are terminated with fixed impedances corresponding to the characteristic impedances of the coaxial lines attached to them. In this paper, we investigate the influence of the termination conditions of vacuum chambers on beam coupling impedances. For this purpose, we introduce a novel approach that allows us to determine beam coupling impedances for arbitrary port terminations. A full-wave Maxwell solver is employed to determine a generalized scattering matrix of the vacuum chamber and its couplers terminated with prespecified reference impedances. Often, these impedances are chosen to be the characteristic line impedances of the waveguides so that coupler ports are free of reflection. Using the generalized scattering matrix, the beam coupling impedances can be readily determined by means of a computationally inexpensive postprocessing step that takes into account arbitrary impedance loads at the coupler ports. Thus, the influence of various port terminations on the beam coupling impedances can be conveniently examined. This is relevant to improve older structures that were designed when no sophisticated design tools were available or to improve the operation of existing structures for a purpose they were initially not designed for. Using the proposed approach, we investigate the 33-cell 200 MHz traveling-wave accelerating structures of the SPS at CERN. It is shown that port termination conditions do have an important influence on the beam coupling impedance and, therefore, must be taken into account in beam stability considerations.
- 6 January 2023
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 26 (1) , 014601
Open AccessInfluence of vacuum chamber port terminations on beam coupling impedances
Vacuum chambers of particle accelerators are typically equipped with radio-frequency couplers. The couplers are employed to excite modes for particle acceleration, to extract the energy of higher-order modes, or for diagnostic purposes. From a network theory perspective, these couplers represent terminal ports by which means the structure can exchange energy with its exterior. Usually, these ports are terminated with fixed impedances corresponding to the characteristic impedances of the coaxial lines attached to them. In this paper, we investigate the influence of the termination conditions of vacuum chambers on beam coupling impedances. For this purpose, we introduce a novel approach that allows us to determine beam coupling impedances for arbitrary port terminations. A full-wave Maxwell solver is employed to determine a generalized scattering matrix of the vacuum chamber and its couplers terminated with prespecified reference impedances. Often, these impedances are chosen to be the characteristic line impedances of the waveguides so that coupler ports are free of reflection. Using the generalized scattering matrix, the beam coupling impedances can be readily determined by means of a computationally inexpensive postprocessing step that takes into account arbitrary impedance loads at the coupler ports. Thus, the influence of various port terminations on the beam coupling impedances can be conveniently examined. This is relevant to improve older structures that were designed when no sophisticated design tools were available or to improve the operation of existing structures for a purpose they were initially not designed for. Using the proposed approach, we investigate the 33-cell 200 MHz traveling-wave accelerating structures of the SPS at CERN. It is shown that port termination conditions do have an important influence on the beam coupling impedance and, therefore, must be taken into account in beam stability considerations.
- Open Access
- 11 August 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (8) , 082001
Impedance minimization of the CERN Super Proton Synchrotron cavities using the generalized coupled -parameter methodIn the context of the Large Hadron Collider (LHC) injector upgrade, components with high contribution to the beam coupling impedance of the injector chain have to be identified and optimized to ensure the delivery of high-intensity proton beams to the LHC. The Super Proton Synchrotron (SPS) is the last accelerator in the LHC injector chain. In the existing design, the longitudinal beam coupling impedance of the SPS cavities limits the increase of the beam intensity in the SPS ring. Since the 200 MHz traveling wave cavities are one of the main contributors to the overall beam coupling budget of the SPS machine, different types of higher-order mode (HOM) couplers are used in the long 33-cell and 44-cell cavities for the damping of various HOMs. The location of the HOM couplers in the cavity, as well as their shape, affects the damping of HOMs. Finding a suitable arrangement of the HOM couplers requires solving a discrete optimization problem. The repetitive calculation of the beam coupling impedance by the conventional time-domain wakefield solvers in the optimization is hindered by the large size of the SPS cavities. The generalized coupled -parameter method is a domain decomposition method for the calculation of the parameters and beam coupling impedance of large structures. In this paper, this method is employed to calculate the beam coupling impedance of the SPS cavities. Then, an optimization method is proposed to find an optimal arrangement of the HOM couplers in the cavities. The article presents the geometrical details of the SPS cavities, a short description of the generalized coupled -parameter method, and a discrete optimization method applied to the SPS cavities.- 11 August 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (8) , 082001
Open AccessImpedance minimization of the CERN Super Proton Synchrotron cavities using the generalized coupled -parameter methodIn the context of the Large Hadron Collider (LHC) injector upgrade, components with high contribution to the beam coupling impedance of the injector chain have to be identified and optimized to ensure the delivery of high-intensity proton beams to the LHC. The Super Proton Synchrotron (SPS) is the last accelerator in the LHC injector chain. In the existing design, the longitudinal beam coupling impedance of the SPS cavities limits the increase of the beam intensity in the SPS ring. Since the 200 MHz traveling wave cavities are one of the main contributors to the overall beam coupling budget of the SPS machine, different types of higher-order mode (HOM) couplers are used in the long 33-cell and 44-cell cavities for the damping of various HOMs. The location of the HOM couplers in the cavity, as well as their shape, affects the damping of HOMs. Finding a suitable arrangement of the HOM couplers requires solving a discrete optimization problem. The repetitive calculation of the beam coupling impedance by the conventional time-domain wakefield solvers in the optimization is hindered by the large size of the SPS cavities. The generalized coupled -parameter method is a domain decomposition method for the calculation of the parameters and beam coupling impedance of large structures. In this paper, this method is employed to calculate the beam coupling impedance of the SPS cavities. Then, an optimization method is proposed to find an optimal arrangement of the HOM couplers in the cavities. The article presents the geometrical details of the SPS cavities, a short description of the generalized coupled -parameter method, and a discrete optimization method applied to the SPS cavities. - Open Access
Towards Electrothermal Optimization of a HVDC Cable Joint Based on Field Simulation
Extruded high-voltage direct current cable systems transmit electric power over long distances. Numerical field simulation can provide access to the internal electrothermal behavior of cable joints, which interconnect cable sections. However, coupled nonlinear electrothermal field simulations are still a challenge. In this work, a robust numerical solution approach is implemented and validated. This approach allows for efficient parameter studies of resistively graded high-voltage direct current cable joint designs. It is assessed how the dielectric stress distribution between the conductor connection and the grounded cable sheath is influenced by nonlinear field and temperature dependent electric conductivity of the field grading material. Optimal field grading material parameters, which fulfill the field grading and power loss requirements, are suggested based on the simulation studies.
Open AccessTowards Electrothermal Optimization of a HVDC Cable Joint Based on Field Simulation
Extruded high-voltage direct current cable systems transmit electric power over long distances. Numerical field simulation can provide access to the internal electrothermal behavior of cable joints, which interconnect cable sections. However, coupled nonlinear electrothermal field simulations are still a challenge. In this work, a robust numerical solution approach is implemented and validated. This approach allows for efficient parameter studies of resistively graded high-voltage direct current cable joint designs. It is assessed how the dielectric stress distribution between the conductor connection and the grounded cable sheath is influenced by nonlinear field and temperature dependent electric conductivity of the field grading material. Optimal field grading material parameters, which fulfill the field grading and power loss requirements, are suggested based on the simulation studies.
- 16 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (2) , 871-879
Simulation Analysis of Critical Parameters for Thermal Stability of Surge Arresters
Ensuring thermal stability is an important aspect of an arrester design process. In this paper, the thermal stability of station class surge arresters is investigated using a coupled electrothermal numerical model. An ungraded 550-kV-station class arrester model is successfully validated against temperature measurements in power grid operation. The arrester cooling rate is introduced to determine the thermal stability threshold. Thermally stable and unstable scenarios are compared. The influence of selected arrester design parameters on the stability threshold is analyzed. It is shown that an improved heat transfer in the arrester air gap increases the thermal stability threshold significantly. Additionally, the nonlinear zinc oxide material characteristics influence the thermal stability threshold strongly. Furthermore, a thermal stability prediction approach based on few, computationally less expensive simulations is proposed. Finally, the results are confirmed for an arrester model that is equipped with a field-grading system. The paper shows that the presented field simulation approach can be reliably used to determine the stability threshold of an arrester, thus, reducing the need for costly laboratory tests.
- 16 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (2) , 871-879
Simulation Analysis of Critical Parameters for Thermal Stability of Surge Arresters
Ensuring thermal stability is an important aspect of an arrester design process. In this paper, the thermal stability of station class surge arresters is investigated using a coupled electrothermal numerical model. An ungraded 550-kV-station class arrester model is successfully validated against temperature measurements in power grid operation. The arrester cooling rate is introduced to determine the thermal stability threshold. Thermally stable and unstable scenarios are compared. The influence of selected arrester design parameters on the stability threshold is analyzed. It is shown that an improved heat transfer in the arrester air gap increases the thermal stability threshold significantly. Additionally, the nonlinear zinc oxide material characteristics influence the thermal stability threshold strongly. Furthermore, a thermal stability prediction approach based on few, computationally less expensive simulations is proposed. Finally, the results are confirmed for an arrester model that is equipped with a field-grading system. The paper shows that the presented field simulation approach can be reliably used to determine the stability threshold of an arrester, thus, reducing the need for costly laboratory tests.
- 31 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 4, 29-36
Electrothermal Optimization of Field Grading Systems of Station Class Surge Arresters
An electrothermal simulation based procedure for the optimization of the field grading systems of station class surge arresters is presented. The main difficulty consists in the numerical solution of the three-dimensional and transient electric field problem that arises when a field grading system is introduced. Therefore, we first develop an equivalent axisymmetric arrester model that can reproduce the electric field stress in the resistor column with high accuracy. The model employs a special virtual electrode geometry whose shape and position are determined by a multi-parametric optimization procedure. On the basis thereof, a numerical optimization of the three-dimensional grading system for an arbitrarily large arrester can be efficiently performed based on transient, electroquasistatic simulations of its axisymmetric equivalent. This procedure is demonstrated for the standard IEC surge arrester. The detailed electrothermal analysis of this arrester shows that an immense improvement of the field and thermal stress distribution in the resistor column can be obtained.
- 31 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 4, 29-36
Electrothermal Optimization of Field Grading Systems of Station Class Surge Arresters
An electrothermal simulation based procedure for the optimization of the field grading systems of station class surge arresters is presented. The main difficulty consists in the numerical solution of the three-dimensional and transient electric field problem that arises when a field grading system is introduced. Therefore, we first develop an equivalent axisymmetric arrester model that can reproduce the electric field stress in the resistor column with high accuracy. The model employs a special virtual electrode geometry whose shape and position are determined by a multi-parametric optimization procedure. On the basis thereof, a numerical optimization of the three-dimensional grading system for an arbitrarily large arrester can be efficiently performed based on transient, electroquasistatic simulations of its axisymmetric equivalent. This procedure is demonstrated for the standard IEC surge arrester. The detailed electrothermal analysis of this arrester shows that an immense improvement of the field and thermal stress distribution in the resistor column can be obtained.
- 14 April 2018
- Published by Springer Nature
- p. 101-109
Modelling and Simulation of Electrically Controlled Droplet Dynamics
- 14 April 2018
- Published by Springer Nature
- p. 101-109
Modelling and Simulation of Electrically Controlled Droplet Dynamics
- Open Access
- 20 January 2012
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 15 (1)
Extension of the Finite Integration Technique including dynamic mesh refinement and its application to self-consistent beam dynamics simulations
An extension of the framework of the Finite Integration Technique (FIT) including dynamic and adaptive mesh refinement is presented. After recalling the standard formulation of the FIT, the proposed mesh adaptation procedure is described. Besides the linear interpolation approach, a novel interpolation technique based on specialized spline functions for approximating the discrete electromagnetic field solution during mesh adaptation is introduced. The standard FIT on a fixed mesh and the new adaptive approach are applied to a simulation test case with a known analytical solution. The numerical accuracy of the two methods is shown to be comparable. The dynamic mesh approach is, however, much more efficient. This is demonstrated with the full scale modeling of the complete rf gun at the Photo Injector Test Facility DESY Zeuthen (PITZ) on a single computer. Results of a detailed design study addressing the effects of individual components of the gun onto the beam emittance using a fully self-consistent approach are presented.
- 20 January 2012
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 15 (1)
Open AccessExtension of the Finite Integration Technique including dynamic mesh refinement and its application to self-consistent beam dynamics simulations
An extension of the framework of the Finite Integration Technique (FIT) including dynamic and adaptive mesh refinement is presented. After recalling the standard formulation of the FIT, the proposed mesh adaptation procedure is described. Besides the linear interpolation approach, a novel interpolation technique based on specialized spline functions for approximating the discrete electromagnetic field solution during mesh adaptation is introduced. The standard FIT on a fixed mesh and the new adaptive approach are applied to a simulation test case with a known analytical solution. The numerical accuracy of the two methods is shown to be comparable. The dynamic mesh approach is, however, much more efficient. This is demonstrated with the full scale modeling of the complete rf gun at the Photo Injector Test Facility DESY Zeuthen (PITZ) on a single computer. Results of a detailed design study addressing the effects of individual components of the gun onto the beam emittance using a fully self-consistent approach are presented.