Masakatsu Miyajima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Masakatsu Miyajima has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Masaho Yoshida
Department of Civil Engineering, National Institute of Technology, Fukui College, Sabae, Japan
5 shared publications Masaru Kitaura
2 shared publications- Shogo Kaneko
Kubota Corporation, Department of Ductile Iron Pipe R & D, Japan
2 shared publications Yuko Serikawa
2 shared publications- Abdolhossein Fallahi
Azarbaijan Shahid Madani University
1 shared publication - Akira Murata1 shared publication
Latest Publications
- 11 December 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 221-228
Study on Behavior of Ductile Iron Pipelines with Earthquake-Resistant Joints Buried across a Fault
This study is focusing on behavior of ductile iron pipelines with earthquake-resistant joints buried across a fault used widely for water pipelines in Japan. It is necessary to design a pipeline carefully in case of crossing a fault, because the partially large displacement occurs on the pipelines when a fault moves by an earthquake. Although there is some research on behavior of steel pipelines which cross a fault, there are few studies of ductile iron pipelines. In this study, we investigated the behavior of pipeline buried across a fault by simulation analysis and verification experiment. As a result, we clarified that the earthquake resistant joint nearest to a fault began to move when a fault began to move, and then the joints in line began to move when the expansion, contraction and deflection angle in the joint nearest to a fault reached its capacity. In addition, we confirmed that we could evaluate the safety of pipeline against the fault movement by deflection angle in each joint. As a result, using colors with large bending performance rather than straight pipe sockets of shortening the pipe length was effective to increase the safety of pipeline near a fault.
- 11 December 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 221-228
Study on Behavior of Ductile Iron Pipelines with Earthquake-Resistant Joints Buried across a Fault
This study is focusing on behavior of ductile iron pipelines with earthquake-resistant joints buried across a fault used widely for water pipelines in Japan. It is necessary to design a pipeline carefully in case of crossing a fault, because the partially large displacement occurs on the pipelines when a fault moves by an earthquake. Although there is some research on behavior of steel pipelines which cross a fault, there are few studies of ductile iron pipelines. In this study, we investigated the behavior of pipeline buried across a fault by simulation analysis and verification experiment. As a result, we clarified that the earthquake resistant joint nearest to a fault began to move when a fault began to move, and then the joints in line began to move when the expansion, contraction and deflection angle in the joint nearest to a fault reached its capacity. In addition, we confirmed that we could evaluate the safety of pipeline against the fault movement by deflection angle in each joint. As a result, using colors with large bending performance rather than straight pipe sockets of shortening the pipe length was effective to increase the safety of pipeline near a fault.
- 6 September 2012
- Published by Springer Nature
- p. 391-399
Simulation of Evacuation Behaviour During a Disaster for Classes Building of Azarbaijan Shahid Madani University by Using DEM
- 6 September 2012
- Published by Springer Nature
- p. 391-399
Simulation of Evacuation Behaviour During a Disaster for Classes Building of Azarbaijan Shahid Madani University by Using DEM
- 6 September 2012
- Published by Springer Nature
- p. 293-311
Liquefaction Countermeasure Technique by Using Logs
- 6 September 2012
- Published by Springer Nature
- p. 293-311
Liquefaction Countermeasure Technique by Using Logs
- 17 August 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 1256-1264
Study on the Applicability of Currently Used Soil-Pipe Interaction Equations for Segmented Buried Pipelines Subjected to Fault Movement
This study investigates the applicability of force-displacement equations suggested in currently used design codes, based on "Guidelines for the seismic design of oil and gas pipeline systems" of ASCE (1984)[1] as their main reference, to introduce the soil-pipe interaction for segmented type of pipeline systems. Hence, results of finite element method (FEM) analyses are verified by full-scale experiments on a segmented ductile iron pipeline with 93mm diameter and 15m length. Pipeline is installed at a 60cm depth from the ground surface in two types of sandy soil with different values of sub-grade reaction. Adopted fault is a reverse type which has an intersection angle of 60 degrees with pipeline and moves in three same steps to reach its total movement of 35cm. Findings reveal that the aforesaid interaction equations are basically developed for continuous pipelines and the effect of connection joints on the integrated structural behavior of segmented pipelines is not considered in them. Hence, suggesting them by currently used guidelines for seismic design of fault crossing segmented pipelines leads to overestimation of soil resistance against relative downward movement of pipeline in surrounding soil continuum.
- 17 August 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 1256-1264
Study on the Applicability of Currently Used Soil-Pipe Interaction Equations for Segmented Buried Pipelines Subjected to Fault Movement
This study investigates the applicability of force-displacement equations suggested in currently used design codes, based on "Guidelines for the seismic design of oil and gas pipeline systems" of ASCE (1984)[1] as their main reference, to introduce the soil-pipe interaction for segmented type of pipeline systems. Hence, results of finite element method (FEM) analyses are verified by full-scale experiments on a segmented ductile iron pipeline with 93mm diameter and 15m length. Pipeline is installed at a 60cm depth from the ground surface in two types of sandy soil with different values of sub-grade reaction. Adopted fault is a reverse type which has an intersection angle of 60 degrees with pipeline and moves in three same steps to reach its total movement of 35cm. Findings reveal that the aforesaid interaction equations are basically developed for continuous pipelines and the effect of connection joints on the integrated structural behavior of segmented pipelines is not considered in them. Hence, suggesting them by currently used guidelines for seismic design of fault crossing segmented pipelines leads to overestimation of soil resistance against relative downward movement of pipeline in surrounding soil continuum.
- Open Access
- 1 January 2012
- Published by Japan Association for Earthquake Engineering in Journal of Japan Association for Earthquake Engineering
- Vol. 12 (2) , 2_60-2_77
Ground Motion Evaluation at Yokokura Village for the 2011 Nagano - Niigata Border Earthquake Based on the Site-effect Substitution Method
2011年東北地方太平洋沖地震の翌日に発生した2011年長野・新潟県境地震では、震源域を中心に強い地震動が数多く観測された。震源近傍の長野県栄村などでは、住家被害などが多発しており、被災地点の地震動を推定することは非常に重要である。そこで本研究では、栄村横倉集落での余震観測結果などに基づいて、当該地点におけるサイト特性を評価した。そして、サイト特性置換手法を用いて、栄村横倉集落での地震動を推定した。さらに、既往の大規模地震による強震観測記録との比較検討を行い、栄村横倉集落における推定地震動の特徴についても言及した。
- 1 January 2012
- Published by Japan Association for Earthquake Engineering in Journal of Japan Association for Earthquake Engineering
- Vol. 12 (2) , 2_60-2_77
Open AccessGround Motion Evaluation at Yokokura Village for the 2011 Nagano - Niigata Border Earthquake Based on the Site-effect Substitution Method
2011年東北地方太平洋沖地震の翌日に発生した2011年長野・新潟県境地震では、震源域を中心に強い地震動が数多く観測された。震源近傍の長野県栄村などでは、住家被害などが多発しており、被災地点の地震動を推定することは非常に重要である。そこで本研究では、栄村横倉集落での余震観測結果などに基づいて、当該地点におけるサイト特性を評価した。そして、サイト特性置換手法を用いて、栄村横倉集落での地震動を推定した。さらに、既往の大規模地震による強震観測記録との比較検討を行い、栄村横倉集落における推定地震動の特徴についても言及した。
- 4 February 2009
- Published by Springer Nature in Landslides
- Vol. 6 (1) , 47-54
Preliminary investigation of some large landslides triggered by the 2008 Wenchuan earthquake, Sichuan Province, China
- 4 February 2009
- Published by Springer Nature in Landslides
- Vol. 6 (1) , 47-54
Preliminary investigation of some large landslides triggered by the 2008 Wenchuan earthquake, Sichuan Province, China
- 14 May 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Shake-Table Testing and FLAC Modeling of Liquefaction-Induced Slope Failure and Damage to Buried Pipelines
This paper presents Shake-Table testing and FLAC numerical modeling of liquefaction-induced large ground lateral movement and settlement, and pipeline behavior induced by soil movement. A series of laboratory Shake-Table experiments were performed using a model slope ground and model pipe buried under the crest of the slope in a box 1,800 mm long by 600 mm wide by 800 mm high. A typical 2H:1V slope was prepared with its crest at the center of the box. The model pipe had an outside diameter of 25 mm and was buried crossing the full box width and 100 mm below the crest. The above model ground was repeated for different amplitudes of input sine waves varying from O.1g to 0.25g. Observed and recorded ground failures included lateral spreading and settlement, sand boiling, time histories of excess pore water pressure buildup, input acceleration and model pipe responded acceleration. The above experimental cases were modeled using a nonlinear effective-stress modeling approach with computer code FLAC coupled with a practical-oriented pore pressure model based on cyclic stress method by Seed and co-workers (Seed, 1979). Pore water pressure buildup and dissipation were modeled using alternative stepping of fluid flow-mechanical interaction. The computed ground failures reasonably agree with the observations in the Shake-Table test. The FLAC modeling further revealed the soil liquefaction mechanism and induced ground deformation and pipe deflection.
- 14 May 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Shake-Table Testing and FLAC Modeling of Liquefaction-Induced Slope Failure and Damage to Buried Pipelines
This paper presents Shake-Table testing and FLAC numerical modeling of liquefaction-induced large ground lateral movement and settlement, and pipeline behavior induced by soil movement. A series of laboratory Shake-Table experiments were performed using a model slope ground and model pipe buried under the crest of the slope in a box 1,800 mm long by 600 mm wide by 800 mm high. A typical 2H:1V slope was prepared with its crest at the center of the box. The model pipe had an outside diameter of 25 mm and was buried crossing the full box width and 100 mm below the crest. The above model ground was repeated for different amplitudes of input sine waves varying from O.1g to 0.25g. Observed and recorded ground failures included lateral spreading and settlement, sand boiling, time histories of excess pore water pressure buildup, input acceleration and model pipe responded acceleration. The above experimental cases were modeled using a nonlinear effective-stress modeling approach with computer code FLAC coupled with a practical-oriented pore pressure model based on cyclic stress method by Seed and co-workers (Seed, 1979). Pore water pressure buildup and dissipation were modeled using alternative stepping of fluid flow-mechanical interaction. The computed ground failures reasonably agree with the observations in the Shake-Table test. The FLAC modeling further revealed the soil liquefaction mechanism and induced ground deformation and pipe deflection.