DHDavid Hudak

David Hudak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


David Hudak has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    IMERG in the Canadian Precipitation Analysis (CaPA) System for Winter Applications

    by Stéphane Bélair, Pei-Ning Feng, Franck Lespinas, Dikra Khedhaouiria, David Hudak, Daniel Michelson, Catherine Aubry, Florence Beaudry, Marco L. Carrera, Julie M. Thériault

    Several configurations of the Canadian Precipitation Analysis system (CaPA) currently produce precipitation analyses at Environment and Climate Change Canada (ECCC). To improve CaPA’s performance during the winter season, the impact of assimilating the IMERG V06 product (IMERG: Integrated Multi-satellitE Retrievals for GPM—Global Precipitation Measurement mission) into CaPA is examined in this study. Tests are conducted with CaPA’s 10 km deterministic version, evaluated over Canada and the northern part of the United States (USA). Maps from a case study show that IMERG plays a contradictory role in the production of CaPA’s precipitation analyses for a synoptic-scale winter storm over North America’s eastern coast. While its contribution appears to be physically correct over southern portions of the meteorological system, and early in its intensification phase, IMERG displays unrealistic spatial structures over land later in the system’s life cycle when it is located over northern (colder) areas. Objective evaluation of CaPA’s analyses when IMERG is assimilated without any restrictions shows an overall decrease in precipitation, which has a mixed effect (positive and negative) on the bias indicators. But IMERG’s influence on the Equitable Threat Score (ETS), a measure of CaPA’s analyses accuracy, is clearly negative. Using IMERG’s quality index (QI) to filter out areas where it is less accurate improves CaPA’s objective evaluation, leading to better ETS versus the control experiment in which no IMERG data are assimilated. Several diagnostics provide insight into the nature of IMERG’s contribution to CaPA. For the most successful configuration, with a QI threshold of 0.3, IMERG’s impact is mostly found in the warmer parts of the domain, i.e., in northern US states and in British Columbia. Spatial means of the temporal sums of absolute differences between CaPA’s analyses with and without IMERG indicate that this product also contributes meaningfully over land areas covered by snow, and areas where air temperature is below −2 °C (where precipitation is assumed to be in solid phase).


  • Open Access

    Infrared measurements in the Arctic using two Atmospheric Emitted Radiance Interferometers

    by Z Mariani, K Strong, M Wolff, P Rowe, V Walden, P F Fogal, T Duck, G Lesins, D S Turner, C Cox, et al.

    The Extended-range Atmospheric Emitted Radiance Interferometer (E-AERI) is a moderate resolution (1 cm−1) Fourier transform infrared spectrometer for measuring the absolute downwelling infrared spectral radiance from the atmosphere between 400 and 3000 cm−1. The extended spectral range of the instrument permits monitoring of the 400–550 cm−1 (20–25 μm) region, where most of the infrared surface cooling currently occurs in the dry air of the Arctic. Spectra from the E-AERI have the potential to provide information about radiative balance, trace gases, and cloud properties in the Canadian high Arctic. Calibration, performance evaluation, and certification of the E-AERI were performed at the University of Wisconsin Space Science and Engineering Centre from September to October 2008. The instrument was then installed at the Polar Environment Atmospheric Research Laboratory (PEARL) Ridge Lab (610 m altitude) at Eureka, Nunavut, in October 2008, where it acquired one year of data. Measurements are taken every seven minutes year-round, including polar night when the solar-viewing spectrometers at PEARL are not operated. A similar instrument, the University of Idaho's Polar AERI (P-AERI), was installed at the Zero-altitude PEARL Auxiliary Laboratory (0PAL), 15 km away from the PEARL Ridge Lab, from March 2006 to June 2009. During the period of overlap, these two instruments provided calibrated radiance measurements from two altitudes. A fast line-by-line radiative transfer model is used to simulate the downwelling radiance at both altitudes; the largest differences (simulation-measurement) occur in spectral regions strongly influenced by atmospheric temperature and/or water vapour. The two AERI instruments at close proximity but located at two different altitudes are well-suited for investigating cloud forcing. As an example, it is shown that a thin, low ice cloud resulted in a 6% increase in irradiance. The presence of clouds creates a large surface radiative forcing in the Arctic, particularly in the 750–1200 cm−1 region where the downwelling radiance is several times greater than clear-sky radiances, which is significantly larger than in other more humid regions.


  • Open Access

    Infrared emission measurements in the Arctic using a new extended-range AERI

    by Z. Mariani, K. Strong, M. Wolff, P. Rowe, V. Walden, P. F. Fogal, T. Duck, G. Lesins, C. Cox, E. Eloranta, et al.

    The Extended-range Atmospheric Emitted Radiance Interferometer (E-AERI) is a moderate resolution (1 cm−1) Fourier transform infrared spectrometer for measuring the absolute downwelling infrared spectral radiance from the atmosphere between 400 and 3000 cm−1. The extended spectral range of the instrument permits monitoring of the 400–550 cm−1 (20–25 μm) region, where most of the infrared surface cooling currently occurs in the dry air of the Arctic. Spectra from the E-AERI have the potential to provide information about radiative balance, trace gases, and cloud properties in the Canadian high Arctic. Calibration, performance evaluation, and certification of the E-AERI were performed at the University of Wisconsin Space Science and Engineering Centre from September to October 2008. The instrument was then installed at the Polar Environment Atmospheric Research Laboratory (PEARL) Ridge Lab at Eureka, Nunavut, in October 2008, where it acquired one year of data. Measurements are taken every seven minutes year-round, including polar night when the solar-viewing spectrometers at PEARL are not operated. A similar instrument, the University of Idaho's Polar AERI (P-AERI), was installed at the Zero-altitude PEARL Auxiliary Laboratory (0PAL) from March 2006 to June 2009. During the period of overlap, these two instruments provided calibrated radiance measurements from two altitudes. A fast line-by-line radiative transfer model is used to simulate the downwelling radiance at both altitudes; the largest differences (simulation-measurement) occur in spectral regions strongly influenced by atmospheric temperature and/or water vapour. The presence of two AERI instruments at close proximity but two different altitudes allowed for an investigation of the surface radiative forcing by a thin, low ice cloud; the ice cloud resulted in a 6% increase in irradiance. The presence of clouds creates a large surface radiative forcing in the Arctic, particularly in the 750–1200 cm−1 region where the downwelling radiance is several times greater than clear-sky radiances, which is significantly larger than in other more humid regions.


  • Validation of the CloudSat precipitation occurrence algorithm using the Canadian C band radar network

    by David Hudak, Peter Rodriguez, Norman Donaldson

    The ability of CloudSat to detect precipitation in cold season cloud systems is examined using data from the Environment Canada C band weather radar at King City, Ontario. The factors complicating the comparison are the time mismatch, the differences in sensitivity, and the changes to the geometry of cross section with range from the ground radar, W band radar attenuation, and the effect of ground clutter. A total of 40 overpasses with precipitation were observed over the King City radar from September 2006 to April 2007. In about 14% of the precipitation profiles, time mismatches were diagnosed. When these cases were removed, the skill scores of the CloudSat precipitation occurrence product were excellent. The most frequent cause of a false detection was an incorrect precipitation threshold in the algorithm. The most frequent cause of a miss in detection was ground clutter removal of valid echoes by the algorithm. Overall, the CloudSat algorithm handled the effect of attenuation very well. Improvement to the algorithm would arise from a better tuning of the precipitation threshold, a threshold of −10 dBZ instead of −18 dBZ being more appropriate for winter storms in the Great Lakes area, and more effective ground clutter filtering in the lowest four range bins of the CloudSat data. The methodology employed here and the 1456 verified precipitation profiles from CloudSat can serve as a framework for a test bed to evaluate precipitation products from CloudSat.


  • Weather systems occurring over Fort Simpson, Northwest Territories, Canada, during three seasons of 1998–1999: 1. Cloud features

    by D. Hudak, B. Currie, R. Stewart, P. Rodriguez, J. Burford, N. Bussières, B. Kochtubajda

    An investigation of high‐latitude continental cloud systems was carried out in the interior of the Northwest Territories of Canada during three multiweek periods during the fall, winter, and spring of 1998–1999 as part of the Canadian Global Energy and Water Cycle Experiment (GEWEX) Enhanced Study. Radar data supplemented by satellite, upper air, and surface observations were used to determine the seasonal behavior of cloud macroscopic properties and compare these with similar observations elsewhere. Unique features included the prevalence of multilayered systems, the cold temperatures of low clouds, and a significant diurnal trend in cloud properties in the winter. A synoptic classification was developed and shown to be an important factor in explaining the variability of cloud properties. A consistent picture emerges of the upslope component and wind shear aloft contributing to the cloud structure in five synoptic classes. Vertically resolved cloud properties highlighted the importance of the ice process in these cloud systems. The cloud system reflectivity and temperature dependencies further supported the synoptic characterizations and highlighted the significance of using seasonally based relationships in automated cloud identification algorithms. The implication of the cloud system variability for radiation measurements was also shown. The radar reflectivity data, degraded to match CloudSat resolution and sensitivity, showed that cloud detection was reliable but that there was a positive bias with cloud thickness. Negative biases in cloud top retrievals based on advanced very high resolution radiometer data were also identified. The Global Environmental Multiscale model illustrated some degree of bias in the occurrence and vertical distribution of these cloud systems. Winter situations in general and midclouds situations in particular were the most poorly handled in both the satellite applications and the model simulations.