Sasan Babaie Kafaky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sasan Babaie Kafaky has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Asadollah Mataji
Department of Forestry, Faculty of Natural resources and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 shared publications- Asadollah Mataji
Department of Forestry, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 shared publications H. Aliani
Karaj Municipality, Karaj, Iran
3 shared publicationsA. Saffari
Kharazmi University
2 shared publications- Mahmod Reza Sahebi
K. N. Toosi University of Technology
2 shared publications - Naimeh Rahimizadeh
Food Science and Technology Department, School of Agriculture, Shiraz University
2 shared publications
Latest Publications
- 15 March 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (4) , 1-20
The effect of spatiotemporal characteristics of drought and wet years on the development of fire occurrence in natural regions of western Iran (Lorestan Province)
Understanding the spatiotemporal relationships of droughts and fires in natural regions is very important to improve decision-making in fire management. For this purpose, the natural regions of Lorestan Province in the west of Iran were selected. Fire data from MODIS satellite products and monthly rainfall data of the province were extracted to estimate the SPI and PDSI for the statistical period of 2000 to 2021. The study examined the annual and monthly correlation between fires and droughts in the province. The results showed that June and July had the highest frequency of fires. The annual fires in the natural regions have been an increasing trend. 2019 experienced the highest number of fires. Winter and spring drought events had a significant correlation with spring and summer fires. In the wetness year of 2019, the frequency of fires was higher than in the dryness year of 2005. The highest fire events were observed in poor to moderate rangelands (0.05 < NDVI < 0.15) in wetness conditions. Despite the smaller area of high-fire risk areas in wetness conditions, a higher frequency of fires can be expected due to the availability of plant biomass during the peak fire period. Although drought is clearly a contributing factor in the spread of fires in the Zagros, the relationship between drought and fire is influenced by more local factors. The map of areas with high fire risk in this study can be used as a preliminary map to identify high-risk areas, especially during critical seasons, and be prioritized by planners.
- 15 March 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (4) , 1-20
The effect of spatiotemporal characteristics of drought and wet years on the development of fire occurrence in natural regions of western Iran (Lorestan Province)
Understanding the spatiotemporal relationships of droughts and fires in natural regions is very important to improve decision-making in fire management. For this purpose, the natural regions of Lorestan Province in the west of Iran were selected. Fire data from MODIS satellite products and monthly rainfall data of the province were extracted to estimate the SPI and PDSI for the statistical period of 2000 to 2021. The study examined the annual and monthly correlation between fires and droughts in the province. The results showed that June and July had the highest frequency of fires. The annual fires in the natural regions have been an increasing trend. 2019 experienced the highest number of fires. Winter and spring drought events had a significant correlation with spring and summer fires. In the wetness year of 2019, the frequency of fires was higher than in the dryness year of 2005. The highest fire events were observed in poor to moderate rangelands (0.05 < NDVI < 0.15) in wetness conditions. Despite the smaller area of high-fire risk areas in wetness conditions, a higher frequency of fires can be expected due to the availability of plant biomass during the peak fire period. Although drought is clearly a contributing factor in the spread of fires in the Zagros, the relationship between drought and fire is influenced by more local factors. The map of areas with high fire risk in this study can be used as a preliminary map to identify high-risk areas, especially during critical seasons, and be prioritized by planners.
- 30 July 2024
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (4) , 1-12
Analysis of urban and peripheral green spaces using DEMATEL & COPRAS methods (West of Karaj city)
- 30 July 2024
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (4) , 1-12
Analysis of urban and peripheral green spaces using DEMATEL & COPRAS methods (West of Karaj city)
- 14 February 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (3) , 2713-2732
Relationship among environmental factors with distribution of genetic types of Avicennia marina in mangrove ecosystems of Iran
- 14 February 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (3) , 2713-2732
Relationship among environmental factors with distribution of genetic types of Avicennia marina in mangrove ecosystems of Iran
- 23 May 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (8) , 7821-7832
Effect of cadmium and lead on Eldar pine and Arizona cypress species in Tehran green space
- 23 May 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (8) , 7821-7832
Effect of cadmium and lead on Eldar pine and Arizona cypress species in Tehran green space
- 24 April 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (5) , 1-17
Estimation of trees height and vertical structure using SAR interferometry in uneven-aged and mixed forests
Estimation of forest height is an important parameter of stands structure that aids in the determination of forest biomass, successional stage dynamics, and the decision of the type of forest management. In addition, estimating the height of trees especially in uneven-aged, massive, and multi-storied forest stands always faces challenges in kind of inventory and accuracy of the assessment. In this research, the synthetic aperture radar (SAR) interferometry technique was used to estimate the height of trees for determining the vertical structure of forest. For this purpose, we focused on an area at the mixed and uneven-aged forest in Iran and evaluated the potential of Envisat ASAR data to characterize the tree height in the forest patches and the digital surface model (DSM) was produced via SAR interferometry. The height of trees and the vertical structure of the forest stands were estimated using produced DSM and Digital elevation Model (DEM). Furthermore, the accuracy of estimated parameters was evaluated with real ground data (11 × 1 ha (100 × 100 m) sample plots). The results indicated that the estimated height of trees was meanly 7.69 m with a 22 m STDV over the reality. Furthermore, the vertical structure in all the plots was three-storied that they are the same as ground truth, but the percentage of the share of trees in the under and middle story was different from the ground truth. In conclusion, the tree height and vertical structure of forest stands can be determined with acceptable accuracy via SAR interferometry and Envisat ASAR data.
- 24 April 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (5) , 1-17
Estimation of trees height and vertical structure using SAR interferometry in uneven-aged and mixed forests
Estimation of forest height is an important parameter of stands structure that aids in the determination of forest biomass, successional stage dynamics, and the decision of the type of forest management. In addition, estimating the height of trees especially in uneven-aged, massive, and multi-storied forest stands always faces challenges in kind of inventory and accuracy of the assessment. In this research, the synthetic aperture radar (SAR) interferometry technique was used to estimate the height of trees for determining the vertical structure of forest. For this purpose, we focused on an area at the mixed and uneven-aged forest in Iran and evaluated the potential of Envisat ASAR data to characterize the tree height in the forest patches and the digital surface model (DSM) was produced via SAR interferometry. The height of trees and the vertical structure of the forest stands were estimated using produced DSM and Digital elevation Model (DEM). Furthermore, the accuracy of estimated parameters was evaluated with real ground data (11 × 1 ha (100 × 100 m) sample plots). The results indicated that the estimated height of trees was meanly 7.69 m with a 22 m STDV over the reality. Furthermore, the vertical structure in all the plots was three-storied that they are the same as ground truth, but the percentage of the share of trees in the under and middle story was different from the ground truth. In conclusion, the tree height and vertical structure of forest stands can be determined with acceptable accuracy via SAR interferometry and Envisat ASAR data.
- 23 September 2020
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (10) , 1-15
Detecting the development stages of natural forests in northern Iran with different algorithms and high-resolution data from GeoEye-1
Nowadays, taking advantage of multispectral sensors with the high spatial and spectral resolution and using a variety of plant indices and remote sensing have provided the possibility of more accurate analysis and classification of satellite data in the identification of natural phenomena. Nowadays, obtaining information about the structure of forests through remote sensing data to manage renewable resources is of interest to managers and researchers. This study produced the development maps of natural forests in northern Iran by taking advantage of GeoEye-1 data, training samples, and various algorithms through the pixel-based, object-based, and model-based methods. The classification’s ultimate accuracy was calculated by each of the above methods with the overall accuracy parameters and kappa coefficient. By examining the accuracy of map classification resulting from different methods, the maximum accuracy (78%) in object-based method was estimated based on the segmentation of NDVI and the maximum likelihood algorithm. Meanwhile, some other classification methods showed much less accuracy. The results showed that the algorithms following the structural patterns for pixel distribution classification provided a higher accuracy. Also, these results showed the high potential of high-resolution data from GeoEye-1 in the production of forest development maps and the effect of choosing the appropriate algorithm in the production of higher accuracy maps.
- 23 September 2020
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (10) , 1-15
Detecting the development stages of natural forests in northern Iran with different algorithms and high-resolution data from GeoEye-1
Nowadays, taking advantage of multispectral sensors with the high spatial and spectral resolution and using a variety of plant indices and remote sensing have provided the possibility of more accurate analysis and classification of satellite data in the identification of natural phenomena. Nowadays, obtaining information about the structure of forests through remote sensing data to manage renewable resources is of interest to managers and researchers. This study produced the development maps of natural forests in northern Iran by taking advantage of GeoEye-1 data, training samples, and various algorithms through the pixel-based, object-based, and model-based methods. The classification’s ultimate accuracy was calculated by each of the above methods with the overall accuracy parameters and kappa coefficient. By examining the accuracy of map classification resulting from different methods, the maximum accuracy (78%) in object-based method was estimated based on the segmentation of NDVI and the maximum likelihood algorithm. Meanwhile, some other classification methods showed much less accuracy. The results showed that the algorithms following the structural patterns for pixel distribution classification provided a higher accuracy. Also, these results showed the high potential of high-resolution data from GeoEye-1 in the production of forest development maps and the effect of choosing the appropriate algorithm in the production of higher accuracy maps.
- 13 December 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (1) , 43
Forest structure parameter extraction using SPOT-7 satellite data by object- and pixel-based classification methods
Using satellite data to extract forest structure mapping parameters assists forest management. In this research, structural parameters including species, density, canopy, and gaps were extracted from SPOT-7 satellite data over Hyrcanian forests (Iran). A detailed ground inventory was initially conducted, over 12 × 1 ha (100 m × 100 m) plots, in which tree coordinates were plotted, using a differential global positioning system (DGPS), along with data on tree species, diameter-at-breast-height and height, as well as canopy dimensions, and canopy gap shapes, sizes, and positions, for each plot. Then, spectral transformations, vegetation indices, and simple spectral ratios were extracted from SPOT-7 data, and a supervised, pixel-based classification method and a support-vector machine algorithm were used to classify and determine tree species types. In addition, canopy tree borders and gaps were classified, using an object-based method, and tree densities per unit area were determined, using the canopy gravity center. Finally, the original ground data was used to perform an accuracy assessment on the extracted information, with the results showing that forest type could be determined with 95% accuracy and a Kappa coefficient of 0.8. Canopy and gap coverage achieved an overall accuracy of 91% (Kappa coefficient: 0.7), and tree densities per hectare were determined, on average, to be 47 trees fewer than reality. In conclusion, we have shown that forest structural parameters could be extracted, with good accuracy, using a combination of pixel- and object-based methods applied to SPOT-7 imaging.
- 13 December 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (1) , 43
Forest structure parameter extraction using SPOT-7 satellite data by object- and pixel-based classification methods
Using satellite data to extract forest structure mapping parameters assists forest management. In this research, structural parameters including species, density, canopy, and gaps were extracted from SPOT-7 satellite data over Hyrcanian forests (Iran). A detailed ground inventory was initially conducted, over 12 × 1 ha (100 m × 100 m) plots, in which tree coordinates were plotted, using a differential global positioning system (DGPS), along with data on tree species, diameter-at-breast-height and height, as well as canopy dimensions, and canopy gap shapes, sizes, and positions, for each plot. Then, spectral transformations, vegetation indices, and simple spectral ratios were extracted from SPOT-7 data, and a supervised, pixel-based classification method and a support-vector machine algorithm were used to classify and determine tree species types. In addition, canopy tree borders and gaps were classified, using an object-based method, and tree densities per unit area were determined, using the canopy gravity center. Finally, the original ground data was used to perform an accuracy assessment on the extracted information, with the results showing that forest type could be determined with 95% accuracy and a Kappa coefficient of 0.8. Canopy and gap coverage achieved an overall accuracy of 91% (Kappa coefficient: 0.7), and tree densities per hectare were determined, on average, to be 47 trees fewer than reality. In conclusion, we have shown that forest structural parameters could be extracted, with good accuracy, using a combination of pixel- and object-based methods applied to SPOT-7 imaging.
- 19 November 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (12) , 729
Modeling and prediction of future ecotourism conditions applying system dynamics
The ecotourism industry is one of the largest industries and has an important role in the economic social and cultural development of societies, especially in developing countries. Policymaking and planning procedures in this industry require the application of the methods that can appropriately model mutual and complex interactions and contacts. System dynamics is an accurate modeling method to simulate complex systems in a structured way and to design more effective policies by using these complex systems. In this study, the interactions and dynamics of the main components of ecotourism (effective variables) in the Taleghan area are modeled using system dynamics. To formulate and model simulations in the period between 2005 and 2015 was considered, and then extending the period of investigation, the model simulation was performed till the year 2025. Among the most important results of this study is the effect of the environment on the demand for ecotourism. Environmental degradation and the degradation of the quality of the environment lead to a reduced demand for ecotourism. This study predicts the future of ecotourism by this dynamic and designs a group of policies for the sustainable and comprehensive development of ecotourism on the basis of the behavior of the model variables in order to prevent the degradation of environment and simultaneously ensure that ecotourism demand is not negatively affected. Finally, the best policy “depending construction to the state of the area environment” was selected among them.
- 19 November 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (12) , 729
Modeling and prediction of future ecotourism conditions applying system dynamics
The ecotourism industry is one of the largest industries and has an important role in the economic social and cultural development of societies, especially in developing countries. Policymaking and planning procedures in this industry require the application of the methods that can appropriately model mutual and complex interactions and contacts. System dynamics is an accurate modeling method to simulate complex systems in a structured way and to design more effective policies by using these complex systems. In this study, the interactions and dynamics of the main components of ecotourism (effective variables) in the Taleghan area are modeled using system dynamics. To formulate and model simulations in the period between 2005 and 2015 was considered, and then extending the period of investigation, the model simulation was performed till the year 2025. Among the most important results of this study is the effect of the environment on the demand for ecotourism. Environmental degradation and the degradation of the quality of the environment lead to a reduced demand for ecotourism. This study predicts the future of ecotourism by this dynamic and designs a group of policies for the sustainable and comprehensive development of ecotourism on the basis of the behavior of the model variables in order to prevent the degradation of environment and simultaneously ensure that ecotourism demand is not negatively affected. Finally, the best policy “depending construction to the state of the area environment” was selected among them.
- 21 May 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (6) , 352
Estimating and mapping forest biomass using regression models and Spot-6 images (case study: Hyrcanian forests of north of Iran)
Hyrcanian forests of North of Iran are of great importance in terms of various economic and environmental aspects. In this study, Spot-6 satellite images and regression models were applied to estimate above-ground biomass in these forests. This research was carried out in six compartments in three climatic (semi-arid to humid) types and two altitude classes. In the first step, ground sampling methods at the compartment level were used to estimate aboveground biomass (Mg/ha). Then, by reviewing the results of other studies, the most appropriate vegetation indices were selected. In this study, three indices of NDVI, RVI, and TVI were calculated. We investigated the relationship between the vegetation indices and aboveground biomass measured at sample-plot level. Based on the results, the relationship between aboveground biomass values and vegetation indices was a linear regression with the highest level of significance for NDVI in all compartments. Since at the compartment level the correlation coefficient between NDVI and aboveground biomass was the highest, NDVI was used for mapping aboveground biomass. According to the results of this study, biomass values were highly different in various climatic and altitudinal classes with the highest biomass value observed in humid climate and high-altitude class.
- 21 May 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (6) , 352
Estimating and mapping forest biomass using regression models and Spot-6 images (case study: Hyrcanian forests of north of Iran)
Hyrcanian forests of North of Iran are of great importance in terms of various economic and environmental aspects. In this study, Spot-6 satellite images and regression models were applied to estimate above-ground biomass in these forests. This research was carried out in six compartments in three climatic (semi-arid to humid) types and two altitude classes. In the first step, ground sampling methods at the compartment level were used to estimate aboveground biomass (Mg/ha). Then, by reviewing the results of other studies, the most appropriate vegetation indices were selected. In this study, three indices of NDVI, RVI, and TVI were calculated. We investigated the relationship between the vegetation indices and aboveground biomass measured at sample-plot level. Based on the results, the relationship between aboveground biomass values and vegetation indices was a linear regression with the highest level of significance for NDVI in all compartments. Since at the compartment level the correlation coefficient between NDVI and aboveground biomass was the highest, NDVI was used for mapping aboveground biomass. According to the results of this study, biomass values were highly different in various climatic and altitudinal classes with the highest biomass value observed in humid climate and high-altitude class.
- 4 April 2017
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 14 (9) , 1999-2008
Land evaluation for ecotourism development—an integrated approach based on FUZZY, WLC, and ANP methods
- 4 April 2017
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 14 (9) , 1999-2008
Land evaluation for ecotourism development—an integrated approach based on FUZZY, WLC, and ANP methods