Walter G. Kutschke
Research Subjects
Walter G. Kutschke has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Luis E. Vallejo
Department of Civil and Environmental Engineering, University of Pittsburgh, Pittsburgh, USA
4 shared publications - Garre Conner
Chief Geotechnical Engineer, URS Corporation, Foster Plaza 6, 681 Andersen Drive, Suite 400, Pittsburgh, PA 15220
1 shared publication - Jason Krothe
Chief Geotechnical Engineer, URS Corporation, Foster Plaza 6, 681 Andersen Drive, Suite 400, Pittsburgh, PA 15220
1 shared publication
Latest Publications
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 591-605
Site Characterization and Geotechnical Roadway Design over Karst: Interstate 69, Greene and Monroe Counties, Indiana
Interstate 69 is currently the largest new interstate highway construction project in the United States and is located in southwest Indiana. Twenty-three miles of the interstate traverses karst terrain consisting of sinkholes, swallets, caves, and sinking streams. Geologic and hydrogeologic mapping beyond the conventional geotechnical test boring investigations were required to determine karst treatments. Environmental and water resources were additional concerns for this environmentally sensitive karst system. Bedrock structure and stratigraphy for the karst aquifers were essential for evaluating a variety of mapped and buried karst features across multiple and transitioning physiographic areas. Characterization of the karst aquifer was essential to understanding the hydrology of mapped and unknown karst features. The upward extending cave stream or karst flowpath is better understood knowing its stratigraphic interval and interpretation of hydrogeologic mapping. Results from dye trace studies assisted in developing engineering solutions and determining the environmental impacts of roadway construction. Dye trace injection sites included sinkholes, sinking streams, and karst voids. Additionally, some fractures encountered during geotechnical borings were also injected. Geotechnical engineering efforts addressed the basic principle regarding engineering in karst, which is recognizing that water drives the karst process. A significant aspect for deterring sinkhole development is understanding and controlling surface and subsurface water, as evidenced by case histories. Applying these concepts, engineering solutions consisted of an aggregate cap to allow water flow in a sinkhole but minimize sediment transport, a concrete cap to minimize water infiltration into the sinkhole, and the use of geomembrane liners to minimize surface water infiltration into known areas of concern.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 591-605
Site Characterization and Geotechnical Roadway Design over Karst: Interstate 69, Greene and Monroe Counties, Indiana
Interstate 69 is currently the largest new interstate highway construction project in the United States and is located in southwest Indiana. Twenty-three miles of the interstate traverses karst terrain consisting of sinkholes, swallets, caves, and sinking streams. Geologic and hydrogeologic mapping beyond the conventional geotechnical test boring investigations were required to determine karst treatments. Environmental and water resources were additional concerns for this environmentally sensitive karst system. Bedrock structure and stratigraphy for the karst aquifers were essential for evaluating a variety of mapped and buried karst features across multiple and transitioning physiographic areas. Characterization of the karst aquifer was essential to understanding the hydrology of mapped and unknown karst features. The upward extending cave stream or karst flowpath is better understood knowing its stratigraphic interval and interpretation of hydrogeologic mapping. Results from dye trace studies assisted in developing engineering solutions and determining the environmental impacts of roadway construction. Dye trace injection sites included sinkholes, sinking streams, and karst voids. Additionally, some fractures encountered during geotechnical borings were also injected. Geotechnical engineering efforts addressed the basic principle regarding engineering in karst, which is recognizing that water drives the karst process. A significant aspect for deterring sinkhole development is understanding and controlling surface and subsurface water, as evidenced by case histories. Applying these concepts, engineering solutions consisted of an aggregate cap to allow water flow in a sinkhole but minimize sediment transport, a concrete cap to minimize water infiltration into the sinkhole, and the use of geomembrane liners to minimize surface water infiltration into known areas of concern.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 212-221
Influence of Lateral Stress Release on the Stability of Stiff Clay Slopes
Natural stiff clay deposits often have an in situ lateral earth pressure that is greater than the vertical pressure. An unsupported excavation into these materials results in outward movement of the slope face due to lateral stress release. This induces shear stress some distance away from the slope face and large increases in horizontal tensile strain occur. Classical solutions to the stability of slopes in stiff clay do not consider the in situ stress conditions or the development of shear zones that occur from lateral stress relief, which can significantly affect overall stability. Finite element analyses demonstrate the influence of the at-rest lateral pressure coefficient (k0) on the development and propagation of shear zones from excavation. Finite element analyses were made on excavations with slope faces that were inclined at 900, 760, and 630 with the horizontal. The lateral stress relief induced by the excavation process caused the development of two distinct shear zones at the toe of these slopes; one shear zone was horizontal and the other was inclined. Also, lateral stress relief caused a tensile crack at the crest of the slopes. The extent of the horizontal and inclined shear zones at the toe of the slope was influenced by the value of k0 used in the finite element analysis. Three values of k0 were used in the analysis, and they were equal to 1, 2, and 3. This study also presents a stability number (Ns) that can be used to calculate the critical slope height when lateral stress relief is considered. The new stability number indicates that the critical slope heights with lateral stress relief are lower than that provided by classical solutions.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 212-221
Influence of Lateral Stress Release on the Stability of Stiff Clay Slopes
Natural stiff clay deposits often have an in situ lateral earth pressure that is greater than the vertical pressure. An unsupported excavation into these materials results in outward movement of the slope face due to lateral stress release. This induces shear stress some distance away from the slope face and large increases in horizontal tensile strain occur. Classical solutions to the stability of slopes in stiff clay do not consider the in situ stress conditions or the development of shear zones that occur from lateral stress relief, which can significantly affect overall stability. Finite element analyses demonstrate the influence of the at-rest lateral pressure coefficient (k0) on the development and propagation of shear zones from excavation. Finite element analyses were made on excavations with slope faces that were inclined at 900, 760, and 630 with the horizontal. The lateral stress relief induced by the excavation process caused the development of two distinct shear zones at the toe of these slopes; one shear zone was horizontal and the other was inclined. Also, lateral stress relief caused a tensile crack at the crest of the slopes. The extent of the horizontal and inclined shear zones at the toe of the slope was influenced by the value of k0 used in the finite element analysis. Three values of k0 were used in the analysis, and they were equal to 1, 2, and 3. This study also presents a stability number (Ns) that can be used to calculate the critical slope height when lateral stress relief is considered. The new stability number indicates that the critical slope heights with lateral stress relief are lower than that provided by classical solutions.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 772-781
Fragmentation due to Desiccation and Shallow Failures in Clay Slopes
High temperatures can be very damaging to clays forming part of natural slopes. High temperatures cause cracking of the clays. The cracking is the result of evaporation and shrinkage. The present study deals with the formation and evolution of cracks in clays as result of high temperatures. At the beginning of the desiccation process of a clay, few cracks form. As time passes, these original cracks interconnect producing the complete fragmentation of the clay. At the end of the fragmentation process, the clay is formed of clay fragments of different sizes. This study uses the fractal dimension concept from fractal theory to measure the particle size distribution of the fragments. The fractal analysis was conducted on bentonite clay samples desiccated in the laboratory and on the giant desiccation polygons found in clays forming part of the Great Basin Playas in the United States. These giant desiccation polygons have three very distinctive shapes: regular random, irregular random, and orthogonal polygon. The level of fragmentation of the clays was measured by the fragmentation fractal dimension. The fragmentation fractal dimension was found to be equal to 2.21 for the regular random polygons, 1.96 for the irregular random polygons, and 3.89 for the orthogonal desiccation polygons. The effect of the level of fragmentation on the stability of shallow failures that the desiccated clay areas could develop is also analyzed in this study.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 772-781
Fragmentation due to Desiccation and Shallow Failures in Clay Slopes
High temperatures can be very damaging to clays forming part of natural slopes. High temperatures cause cracking of the clays. The cracking is the result of evaporation and shrinkage. The present study deals with the formation and evolution of cracks in clays as result of high temperatures. At the beginning of the desiccation process of a clay, few cracks form. As time passes, these original cracks interconnect producing the complete fragmentation of the clay. At the end of the fragmentation process, the clay is formed of clay fragments of different sizes. This study uses the fractal dimension concept from fractal theory to measure the particle size distribution of the fragments. The fractal analysis was conducted on bentonite clay samples desiccated in the laboratory and on the giant desiccation polygons found in clays forming part of the Great Basin Playas in the United States. These giant desiccation polygons have three very distinctive shapes: regular random, irregular random, and orthogonal polygon. The level of fragmentation of the clays was measured by the fragmentation fractal dimension. The fragmentation fractal dimension was found to be equal to 2.21 for the regular random polygons, 1.96 for the irregular random polygons, and 3.89 for the orthogonal desiccation polygons. The effect of the level of fragmentation on the stability of shallow failures that the desiccated clay areas could develop is also analyzed in this study.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 1270-1279
A New Stability Number for Vertical Cuts in Stiff Clays
Excavation into a stiff cohesive material will result in outward movement of the new slope face due to lateral stress relief (LSR). Expansion of the slope face can create a discontinuity at the toe of the slope as well as a tension crack at the surface of the backslope. However, limit equilibrium methods of slope stability analysis only consider the equilibrium of a soil mass tending to move down slope under the influence of gravity without regard for the in-situ stress conditions or the development of shear zones that occur from LSR. The literature contains examples in which undrained failure theoretically applied and predicted a stable excavation, yet failure occurred during or immediately after construction. Finite element analyses performed for this study indicate a strong relationship between overall slope stability and the initial ko value. As ko increased, the horizontal movement at the slope face due to LSR significantly altered the backslope conditions and created shear and tension cracks in the soil mass. Studies performed herein indicated that the initial direction of crack propagation was strongly dependent on ko, with two principal failure planes developing in the soil mass at the toe of slope and another failure plane developing in the backslope along the crest. A vertical slope remained stable for ko = 1.0, as predicted by classical methods. However, LSR resulted in the formation of toe and tension cracks that lead to eventual slope failure for vertical slopes with initial ko = 2 and 3. Based on these studies, the impact of LSR has been incorporated into classical limit equilibrium methods utilizing a modified stability number.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 1270-1279
A New Stability Number for Vertical Cuts in Stiff Clays
Excavation into a stiff cohesive material will result in outward movement of the new slope face due to lateral stress relief (LSR). Expansion of the slope face can create a discontinuity at the toe of the slope as well as a tension crack at the surface of the backslope. However, limit equilibrium methods of slope stability analysis only consider the equilibrium of a soil mass tending to move down slope under the influence of gravity without regard for the in-situ stress conditions or the development of shear zones that occur from LSR. The literature contains examples in which undrained failure theoretically applied and predicted a stable excavation, yet failure occurred during or immediately after construction. Finite element analyses performed for this study indicate a strong relationship between overall slope stability and the initial ko value. As ko increased, the horizontal movement at the slope face due to LSR significantly altered the backslope conditions and created shear and tension cracks in the soil mass. Studies performed herein indicated that the initial direction of crack propagation was strongly dependent on ko, with two principal failure planes developing in the soil mass at the toe of slope and another failure plane developing in the backslope along the crest. A vertical slope remained stable for ko = 1.0, as predicted by classical methods. However, LSR resulted in the formation of toe and tension cracks that lead to eventual slope failure for vertical slopes with initial ko = 2 and 3. Based on these studies, the impact of LSR has been incorporated into classical limit equilibrium methods utilizing a modified stability number.
- 1 October 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 138 (10) , 1277-1283
Investigation of Lateral Stress Relief Using Finite Elements and Fracture Mechanics: Case History Study of the Saxon Pit
A published case history on the performance of a 29-m-deep excavation that occurred in stiff Oxford clay provides direct field evidence that lateral stress relief can produce shear planes. A finite-element model was developed to investigate the impact of lateral stress relief on this slope. The finite-element model utilized published site characterization data and incorporated shear-strength reductions along closed failure planes. Lateral stress relief resulted in an outward slope face movement that produced sufficient differential shear strain to develop and propagate a horizontal crack at the base of the slope. Analyses indicate excellent agreement with observed lateral and vertical slope face movements. The finite-element model suggests that the slope essentially behaved as a shear model. Recognizing the behavior of this slope, the principles of linear elastic fracture mechanics are expanded to consider closed crack propagation under shear loading conditions. Analyses indicate that a closed cra...
- 1 October 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 138 (10) , 1277-1283
Investigation of Lateral Stress Relief Using Finite Elements and Fracture Mechanics: Case History Study of the Saxon Pit
A published case history on the performance of a 29-m-deep excavation that occurred in stiff Oxford clay provides direct field evidence that lateral stress relief can produce shear planes. A finite-element model was developed to investigate the impact of lateral stress relief on this slope. The finite-element model utilized published site characterization data and incorporated shear-strength reductions along closed failure planes. Lateral stress relief resulted in an outward slope face movement that produced sufficient differential shear strain to develop and propagate a horizontal crack at the base of the slope. Analyses indicate excellent agreement with observed lateral and vertical slope face movements. The finite-element model suggests that the slope essentially behaved as a shear model. Recognizing the behavior of this slope, the principles of linear elastic fracture mechanics are expanded to consider closed crack propagation under shear loading conditions. Analyses indicate that a closed cra...