N. J. Fuller
Research Subjects
Research Interests
N. J. Fuller has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- M. Elia
Institute of Human Nutrition, Southampton General Hospital, Southampton, United Kingdom
5 shared publications Jck Wells
MRC Childhood Nutrition Research Centre, Institute of Child Health, London, UK
2 shared publicationsM Elia
Institute of Human Nutrition, Southampton General Hospital, Southampton, UK
2 shared publicationsM S Fewtrell
MRC Childhood Nutrition Research Centre, Institute of Child Health, London, UK
2 shared publicationsO Dewit
Clinical Pharmacology and Experimental Medicine, GlaxoSmithKline, Harlow, UK
2 shared publicationsA K Dixon
1 shared publication
Latest Publications
- 2 February 2005
- Published by Springer Nature in Diabetologia
- Vol. 48 (2) , 222-229
Use of a reference four-component model to define the effects of insulin treatment on body composition in type 2 diabetes: the ?Darwin study?
To define the effects of insulin treatment on body composition and fat distribution, and investigate the potential role of body weight (BWt) gain predictors in patients with poorly controlled type 2 diabetes. Assessments of body composition, using a four-component model, and biochemical indices were obtained in 19 patients [mean (SD): age, 60 (8.3) years; BMI, 25.3 (3.3) kg/m2] with poorly controlled type 2 diabetes, despite maximal oral hypoglycaemic agents, receiving insulin [40 (12.2) units/day] at baseline and after 1, 3 and 6 months. Insulin therapy significantly reduced plasma glucose [−6.0 (4.3) mmol/l], improved [HbA1c [−1.9 (1.8)%], and reversed the BWt lost [3.3 (1.8) kg] before treatment. The 6-month BWt gain [+5.2 (2.7) kg] consisted of body fat [+2.9 (2.7) kg] and fat-free mass [FFM; +2.3 (1.8) kg], with the FFM increase due solely to total body water [TBW; +2.4 (1.5) l], as there were no detectable changes in total body protein or bone mineral, thereby increasing FFM hydration by 1.3%. More body fat was deposited centrally in patients receiving insulin alone than those receiving insulin with an oral hypoglycaemic agent (metformin). Daily insulin dose, HbA1c and hip circumference were independent predictors of BWt gain. Insulin treatment increased fat and FFM similarly in poorly controlled type 2 diabetes patients, with the FFM gain due entirely to TBW. The possible role of metformin in reducing central fat accumulation following insulin treatment warrants further investigation into its mechanism and potential long-term benefits.
- 2 February 2005
- Published by Springer Nature in Diabetologia
- Vol. 48 (2) , 222-229
Use of a reference four-component model to define the effects of insulin treatment on body composition in type 2 diabetes: the ?Darwin study?
To define the effects of insulin treatment on body composition and fat distribution, and investigate the potential role of body weight (BWt) gain predictors in patients with poorly controlled type 2 diabetes. Assessments of body composition, using a four-component model, and biochemical indices were obtained in 19 patients [mean (SD): age, 60 (8.3) years; BMI, 25.3 (3.3) kg/m2] with poorly controlled type 2 diabetes, despite maximal oral hypoglycaemic agents, receiving insulin [40 (12.2) units/day] at baseline and after 1, 3 and 6 months. Insulin therapy significantly reduced plasma glucose [−6.0 (4.3) mmol/l], improved [HbA1c [−1.9 (1.8)%], and reversed the BWt lost [3.3 (1.8) kg] before treatment. The 6-month BWt gain [+5.2 (2.7) kg] consisted of body fat [+2.9 (2.7) kg] and fat-free mass [FFM; +2.3 (1.8) kg], with the FFM increase due solely to total body water [TBW; +2.4 (1.5) l], as there were no detectable changes in total body protein or bone mineral, thereby increasing FFM hydration by 1.3%. More body fat was deposited centrally in patients receiving insulin alone than those receiving insulin with an oral hypoglycaemic agent (metformin). Daily insulin dose, HbA1c and hip circumference were independent predictors of BWt gain. Insulin treatment increased fat and FFM similarly in poorly controlled type 2 diabetes patients, with the FFM gain due entirely to TBW. The possible role of metformin in reducing central fat accumulation following insulin treatment warrants further investigation into its mechanism and potential long-term benefits.
- 17 May 2002
- Published by Springer Nature in International Journal of Obesity
- Vol. 26 (5) , 692-700
Segmental bioelectrical impedance analysis in children aged 8–12 y: 2. The assessment of regional body composition and muscle mass
Objectives: To investigate the potential of segmental bioelectrical impedance analysis (BIA) for assessing regional composition and muscle mass in children. Design: Strengths of relationships were determined between (a) BIA indices of trunk, limbs or limb segments and (b) segment fat or fat-free mass (FFM) assessed using dual-energy X-ray absorptiometry (DXA); the extent of agreement was established between two independent models, based on DXA and BIA, of limb muscle and adipose tissue (AT) mass. Subjects: Eighteen boys and 19 girls aged 8–12 y. Measurements: BIA and anthropometry of trunk, whole limbs, limb segments and defined sections were used to calculate segmental impedance indices and specific resistivities; segment fat and FFM were obtained using DXA; muscle and AT masses of limbs, segments and sections were estimated using DXA and BIA models, and by anthropometry. Results: Segmental BIA indices were significantly related to composition of the segments assessed using DXA; although substantial bias was observed, there was fairly good agreement (low 95% limits of agreement) between the BIA and DXA models of muscle mass and estimates from each were similarly categorised in tertiles, as were estimates of AT. Conclusion: Segmental BIA appears to have potential for assessing in children the composition of body segments, as obtained using DXA, and the masses of muscle and AT in whole limbs, limb segments and defined sections.
- 17 May 2002
- Published by Springer Nature in International Journal of Obesity
- Vol. 26 (5) , 692-700
Segmental bioelectrical impedance analysis in children aged 8–12 y: 2. The assessment of regional body composition and muscle mass
Objectives: To investigate the potential of segmental bioelectrical impedance analysis (BIA) for assessing regional composition and muscle mass in children. Design: Strengths of relationships were determined between (a) BIA indices of trunk, limbs or limb segments and (b) segment fat or fat-free mass (FFM) assessed using dual-energy X-ray absorptiometry (DXA); the extent of agreement was established between two independent models, based on DXA and BIA, of limb muscle and adipose tissue (AT) mass. Subjects: Eighteen boys and 19 girls aged 8–12 y. Measurements: BIA and anthropometry of trunk, whole limbs, limb segments and defined sections were used to calculate segmental impedance indices and specific resistivities; segment fat and FFM were obtained using DXA; muscle and AT masses of limbs, segments and sections were estimated using DXA and BIA models, and by anthropometry. Results: Segmental BIA indices were significantly related to composition of the segments assessed using DXA; although substantial bias was observed, there was fairly good agreement (low 95% limits of agreement) between the BIA and DXA models of muscle mass and estimates from each were similarly categorised in tertiles, as were estimates of AT. Conclusion: Segmental BIA appears to have potential for assessing in children the composition of body segments, as obtained using DXA, and the masses of muscle and AT in whole limbs, limb segments and defined sections.
- Open Access
- 17 May 2002
- Published by Springer Nature in International Journal of Obesity
- Vol. 26 (5) , 684-691
Segmental bioelectrical impedance analysis in children aged 8–12 y: 1. The assessment of whole-body composition
Objectives: To investigate the potential of segmental bioelectrical impedance analysis (BIA) for estimating whole-body composition in children. Design: Strengths of relationships were determined between indices of impedance or specific resistivities of body segments and reference four-component model (4-CM) assessments of body composition. Subjects: Eighteen boys and 19 girls aged 8–12 y. Measurements: Whole-body and segment BIA and anthropometry were used to calculate impedance indices of the whole body and segments and specific resistivities of segments; total body water (TBW), fat-free mass (FFM) and body fat were assessed using the 4-CM. Results: Segmental BIA indices were significantly related to body composition, provided that appropriate comparisons were undertaken for each index: impedance adjusted for unit segment length was better related to TBW and FFM, whereas segment specific resistivity was better related to body fat. Differences between body composition estimates obtained with the 4-CM and predicted using BIA were partly dependent on limb-to-trunk ratios of BIA indices. Conclusion: Segmental BIA has potential for providing additional alternative approaches to the assessment of whole-body composition in children: (a) FFM and TBW were best related to impedance adjusted for segment length; (b) body fat was best related to segment specific resistivity; and (c) the relative influences of different segment BIA indices may be utilisable for generating more valid whole-body composition estimates.
- 17 May 2002
- Published by Springer Nature in International Journal of Obesity
- Vol. 26 (5) , 684-691
Open AccessSegmental bioelectrical impedance analysis in children aged 8–12 y: 1. The assessment of whole-body composition
Objectives: To investigate the potential of segmental bioelectrical impedance analysis (BIA) for estimating whole-body composition in children. Design: Strengths of relationships were determined between indices of impedance or specific resistivities of body segments and reference four-component model (4-CM) assessments of body composition. Subjects: Eighteen boys and 19 girls aged 8–12 y. Measurements: Whole-body and segment BIA and anthropometry were used to calculate impedance indices of the whole body and segments and specific resistivities of segments; total body water (TBW), fat-free mass (FFM) and body fat were assessed using the 4-CM. Results: Segmental BIA indices were significantly related to body composition, provided that appropriate comparisons were undertaken for each index: impedance adjusted for unit segment length was better related to TBW and FFM, whereas segment specific resistivity was better related to body fat. Differences between body composition estimates obtained with the 4-CM and predicted using BIA were partly dependent on limb-to-trunk ratios of BIA indices. Conclusion: Segmental BIA has potential for providing additional alternative approaches to the assessment of whole-body composition in children: (a) FFM and TBW were best related to impedance adjusted for segment length; (b) body fat was best related to segment specific resistivity; and (c) the relative influences of different segment BIA indices may be utilisable for generating more valid whole-body composition estimates.
- Open Access
- 1 July 2001
- Published by Cambridge University Press (CUP) in British Journal of Nutrition
- Vol. 86 (1) , 45-52
Evaluation of a model for total body protein mass based on dual-energy X-ray absorptiometry: comparison with a reference four-component model
The aim of the present study was to evaluate a model of body composition for assessing total body protein (TBP) mass using dual-energy X-ray absorptiometry (DXA), with either measured or assumed total body water (TBW); it was intended to provide a less complex or demanding alternative technique to, for example, the four-component model (4-CM). The following measurements were obtained in healthy adults (n46) aged 18–62 years, and children (n30) aged 8–12 years: body weight (BWt), body volume (BV; under-water weighing), TBW (2H-dilution space or predicted using an assumed hydration fraction of fat-free mass (HFffm)), bone mineral content (BMC; DXA) and fat-free soft tissue (FFST; DXA). TBP was calculated using the 4-CM (TBP=3·050BWt-0·290TBW-2·734BMC-2·747BV) and the DXA model (TBP=FFST-0·2305BMC-TBW). DXA measurements were obtained using the Lunar DPX (Lunar Radiation Corporation, Madison, WI, USA) or Hologic QDR 1000/W (Hologic, Waltham, MA, USA). Precision of the DXA model for TBP with measured TBW (4·6–6·8 % mean TBP) was slightly worse than the 4-CM (4·0–5·4 %), whereas that modelled with assumed HFffmwas more precise (2·4–5·2 %) because it obviated imprecision associated with measuring TBW. Agreement between the 4-CM and DXA model with measured TBW was also worse (e.g. bias, 15 % of the mean; 95 % limits of agreement up to ±39 % for adults measured on the Lunar DPX) than when a constant for HFffmwas assumed (3·7 % and ±21 % respectively). Most of the variability in agreement between these various models was due to interpretation of biological factors, rather than to measurement imprecision. Therefore, the DXA model, which is less complex and demanding than the 4-CM, is of value for assessing TBP in groups of healthy subjects, but is of less value for individuals in whom there may be substantial differences from reference 4-CM estimates.
- 1 July 2001
- Published by Cambridge University Press (CUP) in British Journal of Nutrition
- Vol. 86 (1) , 45-52
Open AccessEvaluation of a model for total body protein mass based on dual-energy X-ray absorptiometry: comparison with a reference four-component model
The aim of the present study was to evaluate a model of body composition for assessing total body protein (TBP) mass using dual-energy X-ray absorptiometry (DXA), with either measured or assumed total body water (TBW); it was intended to provide a less complex or demanding alternative technique to, for example, the four-component model (4-CM). The following measurements were obtained in healthy adults (n46) aged 18–62 years, and children (n30) aged 8–12 years: body weight (BWt), body volume (BV; under-water weighing), TBW (2H-dilution space or predicted using an assumed hydration fraction of fat-free mass (HFffm)), bone mineral content (BMC; DXA) and fat-free soft tissue (FFST; DXA). TBP was calculated using the 4-CM (TBP=3·050BWt-0·290TBW-2·734BMC-2·747BV) and the DXA model (TBP=FFST-0·2305BMC-TBW). DXA measurements were obtained using the Lunar DPX (Lunar Radiation Corporation, Madison, WI, USA) or Hologic QDR 1000/W (Hologic, Waltham, MA, USA). Precision of the DXA model for TBP with measured TBW (4·6–6·8 % mean TBP) was slightly worse than the 4-CM (4·0–5·4 %), whereas that modelled with assumed HFffmwas more precise (2·4–5·2 %) because it obviated imprecision associated with measuring TBW. Agreement between the 4-CM and DXA model with measured TBW was also worse (e.g. bias, 15 % of the mean; 95 % limits of agreement up to ±39 % for adults measured on the Lunar DPX) than when a constant for HFffmwas assumed (3·7 % and ±21 % respectively). Most of the variability in agreement between these various models was due to interpretation of biological factors, rather than to measurement imprecision. Therefore, the DXA model, which is less complex and demanding than the 4-CM, is of value for assessing TBP in groups of healthy subjects, but is of less value for individuals in whom there may be substantial differences from reference 4-CM estimates.
- 1 June 1999
- Vol. 96 (6) , 647-57
Predicting composition of leg sections with anthropometry and bioelectrical impedance analysis, using magnetic resonance imaging as reference.
Magnetic resonance imaging (MRI) was used to evaluate and compare with anthropometry a fundamental bioelectrical impedance analysis (BIA) method for predicting muscle and adipose tissue composition in the lower limb. Healthy volunteers (eight men and eight women), aged 41 to 62 years, with mean (S.D.) body mass indices of 28.6 (5.4) kg/m2 and 25.1 (5.4) kg/m2 respectively, were subjected to MRI leg scans, from which 20-cm sections of thigh and 10-cm sections of lower leg (calf) were analysed for muscle and adipose tissue content, using specifically developed software. Muscle and adipose tissue were also predicted from anthropometric measurements of circumferences and skinfold thicknesses, and by use of fundamental BIA equations involving section impedance at 50 kHz and tissue-specific resistivities. Anthropometric assessments of circumferences, cross-sectional areas and volumes for total constituent tissues matched closely MRI estimates. Muscle volume was substantially overestimated (bias: thigh, -40%; calf, -18%) and adipose tissue underestimated (bias: thigh, 43%; calf, 8%) by anthropometry, in contrast to generally better predictions by the fundamental BIA approach for muscle (bias: thigh, -12%; calf, 5%) and adipose tissue (bias: thigh, 17%; calf, -28%). However, both methods demonstrated considerable individual variability (95% limits of agreement 20-77%). In general, there was similar reproducibility for anthropometric and fundamental BIA methods in the thigh (inter-observer residual coefficient of variation for muscle 3.5% versus 3.8%), but the latter was better in the calf (inter-observer residual coefficient of variation for muscle 8.2% versus 4.5%). This study suggests that the fundamental BIA method has advantages over anthropometry for measuring lower limb tissue composition in healthy individuals.
- 1 June 1999
- Vol. 96 (6) , 647-57
Predicting composition of leg sections with anthropometry and bioelectrical impedance analysis, using magnetic resonance imaging as reference.
Magnetic resonance imaging (MRI) was used to evaluate and compare with anthropometry a fundamental bioelectrical impedance analysis (BIA) method for predicting muscle and adipose tissue composition in the lower limb. Healthy volunteers (eight men and eight women), aged 41 to 62 years, with mean (S.D.) body mass indices of 28.6 (5.4) kg/m2 and 25.1 (5.4) kg/m2 respectively, were subjected to MRI leg scans, from which 20-cm sections of thigh and 10-cm sections of lower leg (calf) were analysed for muscle and adipose tissue content, using specifically developed software. Muscle and adipose tissue were also predicted from anthropometric measurements of circumferences and skinfold thicknesses, and by use of fundamental BIA equations involving section impedance at 50 kHz and tissue-specific resistivities. Anthropometric assessments of circumferences, cross-sectional areas and volumes for total constituent tissues matched closely MRI estimates. Muscle volume was substantially overestimated (bias: thigh, -40%; calf, -18%) and adipose tissue underestimated (bias: thigh, 43%; calf, 8%) by anthropometry, in contrast to generally better predictions by the fundamental BIA approach for muscle (bias: thigh, -12%; calf, 5%) and adipose tissue (bias: thigh, 17%; calf, -28%). However, both methods demonstrated considerable individual variability (95% limits of agreement 20-77%). In general, there was similar reproducibility for anthropometric and fundamental BIA methods in the thigh (inter-observer residual coefficient of variation for muscle 3.5% versus 3.8%), but the latter was better in the calf (inter-observer residual coefficient of variation for muscle 8.2% versus 4.5%). This study suggests that the fundamental BIA method has advantages over anthropometry for measuring lower limb tissue composition in healthy individuals.
- 1 July 1995
- Published by American Physiological Society in American Journal of Physiology-Endocrinology and Metabolism
- Vol. 269 (1) , E172-E182
Estimating energy expenditure from specific activity of urine urea during lengthy subcutaneous NaH14CO3 infusion
Five healthy male subjects were continuously infused subcutaneously with [14C]bicarbonate (12.3 microCi/day) using a mini pump for 5 days while in a whole body calorimeter. Energy expenditure was varied over a range of 1.35-1.75 times basal metabolic rate. Urine collections were obtained throughout the study and used to measure the specific activity of urea, from which CO2 production was estimated. It was assumed that the recovery of label in gaseous CO2 was 95% of that infused and that the specific activity of urea was 85% that of expired CO2. Continuous daily collections of calorimeter air revealed that 95.6 +/- 1.3% (SD) of infused label was recovered as gaseous CO2, with little daily variation. Another 1.5 +/- 0.4% was recovered as urinary urea. The estimated CO2 production, calculated from the specific activity of urea in 24-h urine samples corrected for the small effects due to changes in the size and specific activity of the urea pool, was found to be 100 +/- 5% of the calorimeter estimate for 1-day periods (20.80 +/- 1.44 mol CO2/day) and 100 +/- 2% for 4-day periods. This study suggests that, in healthy subjects, the labeled [14C]bicarbonate-urea method can provide reasonable estimates of net CO2 production over the range examined.
- 1 July 1995
- Published by American Physiological Society in American Journal of Physiology-Endocrinology and Metabolism
- Vol. 269 (1) , E172-E182
Estimating energy expenditure from specific activity of urine urea during lengthy subcutaneous NaH14CO3 infusion
Five healthy male subjects were continuously infused subcutaneously with [14C]bicarbonate (12.3 microCi/day) using a mini pump for 5 days while in a whole body calorimeter. Energy expenditure was varied over a range of 1.35-1.75 times basal metabolic rate. Urine collections were obtained throughout the study and used to measure the specific activity of urea, from which CO2 production was estimated. It was assumed that the recovery of label in gaseous CO2 was 95% of that infused and that the specific activity of urea was 85% that of expired CO2. Continuous daily collections of calorimeter air revealed that 95.6 +/- 1.3% (SD) of infused label was recovered as gaseous CO2, with little daily variation. Another 1.5 +/- 0.4% was recovered as urinary urea. The estimated CO2 production, calculated from the specific activity of urea in 24-h urine samples corrected for the small effects due to changes in the size and specific activity of the urea pool, was found to be 100 +/- 5% of the calorimeter estimate for 1-day periods (20.80 +/- 1.44 mol CO2/day) and 100 +/- 2% for 4-day periods. This study suggests that, in healthy subjects, the labeled [14C]bicarbonate-urea method can provide reasonable estimates of net CO2 production over the range examined.
- 1 October 1992
- Published by American Physiological Society in American Journal of Physiology-Endocrinology and Metabolism
- Vol. 263 (4) , E676-E687
Measurement of bicarbonate turnover in humans: applicability to estimation of energy expenditure
Bicarbonate turnover and energy expenditure were assessed in six healthy male volunteers, by the use of a constant infusion of radiolabeled bicarbonate (NaH14CO3) administered over 36 h, while the volunteers were confined to a whole body indirect calorimeter. Recovery and dilution of isotope were assessed from measurements made on continuous collections of CO2, entering and leaving the calorimeter, urine, and intermittent spot breath and saliva samples. Mean recovery of infused label in gaseous CO2 was 95.6 +/- 1.1% (SD) between 12 and 36 h. Applying a 95% mean recovery of label to each subject individually enabled the use of integrated mean specific activity of CO2 in spot breath and urine samples to predict measured net CO2 production and energy expenditure to within about +/- 6%. Estimates based on urinary measurements were compromised slightly by the exchange of label through the bladder wall (this was dependent on pH and volume of urine). It is concluded that this constant-infusion labeled bicarbonate method offers a potentially useful means of assessing net CO2 production and total energy expenditure over the short term (e.g., 1-3 days).
- 1 October 1992
- Published by American Physiological Society in American Journal of Physiology-Endocrinology and Metabolism
- Vol. 263 (4) , E676-E687
Measurement of bicarbonate turnover in humans: applicability to estimation of energy expenditure
Bicarbonate turnover and energy expenditure were assessed in six healthy male volunteers, by the use of a constant infusion of radiolabeled bicarbonate (NaH14CO3) administered over 36 h, while the volunteers were confined to a whole body indirect calorimeter. Recovery and dilution of isotope were assessed from measurements made on continuous collections of CO2, entering and leaving the calorimeter, urine, and intermittent spot breath and saliva samples. Mean recovery of infused label in gaseous CO2 was 95.6 +/- 1.1% (SD) between 12 and 36 h. Applying a 95% mean recovery of label to each subject individually enabled the use of integrated mean specific activity of CO2 in spot breath and urine samples to predict measured net CO2 production and energy expenditure to within about +/- 6%. Estimates based on urinary measurements were compromised slightly by the exchange of label through the bladder wall (this was dependent on pH and volume of urine). It is concluded that this constant-infusion labeled bicarbonate method offers a potentially useful means of assessing net CO2 production and total energy expenditure over the short term (e.g., 1-3 days).
- 1 January 1991
- Vol. 45 (1) , 43-9
Inter-observer variability in the measurement of body composition.
The inter-observer variation in simple bedside assessments of body composition has been evaluated in 12 healthy adult subjects (6 male and 6 female) by 6 observers. Systematic bias between observers was found to be evident in each of the basic measurements (except height) and in each of the estimates of body composition (except those derived from weight and height alone). The largest residual coefficients of variation (rCV) for the basic measurements were found for skinfold thickness (11-18 per cent for individual skinfold thicknesses, and 9 per cent for the sum of four skinfold thicknesses), and the lowest for weight (0.01 per cent for digital scales, and 0.05 per cent for beam balance) and height (0.4 per cent). The rCV for whole-body resistance (1.2 per cent), forearm resistance (5.4 per cent) and near infra-red interactance (optical density 1: 5.6 per cent and optical density 2: 6.2 per cent) measurements were found to have intermediate values. The variability in the estimate of body fat obtained by skinfold thickness (rCV = 4.6 per cent) and near infra-red interactance methods (rCV = 4.2 per cent) was found to be greater than that from the resistance method (rCV = 2.6 per cent) and by methods based on weight and height alone (rCV = 1.1 per cent). The variability in the estimate of fat-free mass showed the same trend as that for body fat, but the rCVs were less due to the greater mass of the fat-free body compared to body fat.(ABSTRACT TRUNCATED AT 250 WORDS)
- 1 January 1991
- Vol. 45 (1) , 43-9
Inter-observer variability in the measurement of body composition.
The inter-observer variation in simple bedside assessments of body composition has been evaluated in 12 healthy adult subjects (6 male and 6 female) by 6 observers. Systematic bias between observers was found to be evident in each of the basic measurements (except height) and in each of the estimates of body composition (except those derived from weight and height alone). The largest residual coefficients of variation (rCV) for the basic measurements were found for skinfold thickness (11-18 per cent for individual skinfold thicknesses, and 9 per cent for the sum of four skinfold thicknesses), and the lowest for weight (0.01 per cent for digital scales, and 0.05 per cent for beam balance) and height (0.4 per cent). The rCV for whole-body resistance (1.2 per cent), forearm resistance (5.4 per cent) and near infra-red interactance (optical density 1: 5.6 per cent and optical density 2: 6.2 per cent) measurements were found to have intermediate values. The variability in the estimate of body fat obtained by skinfold thickness (rCV = 4.6 per cent) and near infra-red interactance methods (rCV = 4.2 per cent) was found to be greater than that from the resistance method (rCV = 2.6 per cent) and by methods based on weight and height alone (rCV = 1.1 per cent). The variability in the estimate of fat-free mass showed the same trend as that for body fat, but the rCVs were less due to the greater mass of the fat-free body compared to body fat.(ABSTRACT TRUNCATED AT 250 WORDS)
- 1 November 1989
- Vol. 43 (11) , 779-91
Potential use of bioelectrical impedance of the 'whole body' and of body segments for the assessment of body composition: comparison with densitometry and anthropometry.
The value of 'whole body' and segmental impedance measurements, and of simple anthropometric methods for predicting body composition was assessed in 24 normal (14m, 10f) subjects (BMI, 18.3-28.6), using densitometry as the reference method. The contribution of segmental impedance was assessed in a separate group of 24 normal (12m, 12f) subjects (BMI, 19.8-28.8) at two frequencies (1 kHz and 50 kHz). Estimates of specific resistivities of certain individual segments (upper arm, forearm, upper leg, and lower leg) were also made in this group, and compared to those obtained from a group of 7 obese female subjects (BMI, 32.6-56.1). The bias and 95 per cent limits of agreement between densitometrically determined body composition (fat and fat-free mass, and total body water) and the alternative methods were found to vary considerably, depending on the technique and/or equations employed. Estimates of whole body composition based on impedance or resistance measurements were found to be associated with only slightly smaller limits of agreement than those made by anthropometry. The upper limb was found to have the greatest influence on whole body impedance measurements. Indeed, the forearm, which accounts for 1.3 per cent of body weight contributes 25.0 per cent to 'whole body' impedance. The estimated specific resistivities of segments were found to be considerably greater in the obese individuals than in normal female subjects (for example, 75 per cent higher for the upper arm, P less than 0.001). The results suggest that: (a) there may be a systematic, population-related, error in predicting densitometric estimates of body composition with the use of standard equations, which incorporate variables such as weight, height, skinfold thicknesses, and impedance/resistance measurements; (b) in this population, impedance or resistance measurements confer only a small advantage over simple anthropometry for predicting body composition; (c) the impedance of the arm or leg may provide a simple alternative method for assessing the composition of the whole body; and (d) the estimated specific resistivity of individual body segments may be useful for assessing the composition of those segments.
- 1 November 1989
- Vol. 43 (11) , 779-91
Potential use of bioelectrical impedance of the 'whole body' and of body segments for the assessment of body composition: comparison with densitometry and anthropometry.
The value of 'whole body' and segmental impedance measurements, and of simple anthropometric methods for predicting body composition was assessed in 24 normal (14m, 10f) subjects (BMI, 18.3-28.6), using densitometry as the reference method. The contribution of segmental impedance was assessed in a separate group of 24 normal (12m, 12f) subjects (BMI, 19.8-28.8) at two frequencies (1 kHz and 50 kHz). Estimates of specific resistivities of certain individual segments (upper arm, forearm, upper leg, and lower leg) were also made in this group, and compared to those obtained from a group of 7 obese female subjects (BMI, 32.6-56.1). The bias and 95 per cent limits of agreement between densitometrically determined body composition (fat and fat-free mass, and total body water) and the alternative methods were found to vary considerably, depending on the technique and/or equations employed. Estimates of whole body composition based on impedance or resistance measurements were found to be associated with only slightly smaller limits of agreement than those made by anthropometry. The upper limb was found to have the greatest influence on whole body impedance measurements. Indeed, the forearm, which accounts for 1.3 per cent of body weight contributes 25.0 per cent to 'whole body' impedance. The estimated specific resistivities of segments were found to be considerably greater in the obese individuals than in normal female subjects (for example, 75 per cent higher for the upper arm, P less than 0.001). The results suggest that: (a) there may be a systematic, population-related, error in predicting densitometric estimates of body composition with the use of standard equations, which incorporate variables such as weight, height, skinfold thicknesses, and impedance/resistance measurements; (b) in this population, impedance or resistance measurements confer only a small advantage over simple anthropometry for predicting body composition; (c) the impedance of the arm or leg may provide a simple alternative method for assessing the composition of the whole body; and (d) the estimated specific resistivity of individual body segments may be useful for assessing the composition of those segments.