Christian Wirth
Christian Wirth has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
A. Tünnermann
Friedrich Schiller University Jena
3 shared publicationsI. Tsybin
Fraunhofer Institute for Applied Optics and Precision Engineering
3 shared publicationsR. Eberhardt
Fraunhofer Institute for Applied Optics and Precision Engineering
3 shared publications- Thomas Schreiber
Fraunhofer Institute for Applied Optics and Precision Engineering (Germany)
3 shared publications J. Limpert
Friedrich-Schiller University, Institute of Applied Physics, Albert-Einstein-Str. 15, 07745 Jena, Germany
2 shared publications- Jens Limpert
Friedrich-Schiller-Univ. Jena (Germany)
2 shared publications
Latest Publications
- 13 October 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7839, 783917
Large mode area fibre designs for micromachining applications
High power, high-energy, rare-earth-doped fiber laser sources are now considered a suitable option for a number of applications in Medicine, Telecom, LIDAR and industrial applications. Regarding the generation of high-energy pulses, there is a compromise between gain volume and M2 value or beam parameter product for the generation of pulses with useful energy content, for the aforementioned applications and good pulse shape and even a Gaussian output. In this paper, we will present a set of large mode area fiber designs along with full optical characterization data will be presented. Results on energy per pulse from 4 to 20KHz repetition rate and up to 1.3mJ energy for a 350um inner cladding LMA fiber will be discussed among other fiber designs. All fibres were made from proprietary procedures and will be employed in micromachining applications such as metal deposition in applications where laser-assisted cold spraying processes are used. A full review of our LMA fibre designs will be presented.
- 13 October 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7839, 783917
Large mode area fibre designs for micromachining applications
High power, high-energy, rare-earth-doped fiber laser sources are now considered a suitable option for a number of applications in Medicine, Telecom, LIDAR and industrial applications. Regarding the generation of high-energy pulses, there is a compromise between gain volume and M2 value or beam parameter product for the generation of pulses with useful energy content, for the aforementioned applications and good pulse shape and even a Gaussian output. In this paper, we will present a set of large mode area fiber designs along with full optical characterization data will be presented. Results on energy per pulse from 4 to 20KHz repetition rate and up to 1.3mJ energy for a 350um inner cladding LMA fiber will be discussed among other fiber designs. All fibres were made from proprietary procedures and will be employed in micromachining applications such as metal deposition in applications where laser-assisted cold spraying processes are used. A full review of our LMA fibre designs will be presented.
- 12 May 2009
- Published by Optica Publishing Group in Optics Letters
- Vol. 34 (10) , 1567-1569
Average power of 11 kW from spectrally combined, fiber-amplified, nanosecond-pulsed sources
We report on spectral combination of four high repetition rate pulsed Yb-doped fiber amplifiers at wavelength. The output beam is spatially and temporally superposed by use of an all-reflective diffraction grating. average power and pulse energy were extracted with a combining efficiency of 99%.- 12 May 2009
- Published by Optica Publishing Group in Optics Letters
- Vol. 34 (10) , 1567-1569
Average power of 11 kW from spectrally combined, fiber-amplified, nanosecond-pulsed sources
We report on spectral combination of four high repetition rate pulsed Yb-doped fiber amplifiers at wavelength. The output beam is spatially and temporally superposed by use of an all-reflective diffraction grating. average power and pulse energy were extracted with a combining efficiency of 99%.- 6 February 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 15 (2) , 354-360
Incoherent Beam Combining of Continuous-Wave and Pulsed Yb-Doped Fiber Amplifiers
We review the technique of incoherent beam combining and show experimentally the combination of four continuous wave fiber amplifiers to an average power of 2 kW and four pulsed 2 ns fiber amplifiers to an average power of 187 W (pulse energy 3.7 mJ) using binary dielectric gratings. The scaling potential and limitations are discussed in detail.
- 6 February 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 15 (2) , 354-360
Incoherent Beam Combining of Continuous-Wave and Pulsed Yb-Doped Fiber Amplifiers
We review the technique of incoherent beam combining and show experimentally the combination of four continuous wave fiber amplifiers to an average power of 2 kW and four pulsed 2 ns fiber amplifiers to an average power of 187 W (pulse energy 3.7 mJ) using binary dielectric gratings. The scaling potential and limitations are discussed in detail.
- Open Access
- 16 January 2009
- Published by Optica Publishing Group in Optics Express
- Vol. 17 (3) , 1178-1183
2 kW incoherent beam combining of four narrow-linewidth photonic crystal fiber amplifiers
We report on beam combining of four narrow-linewidth fiber amplifier chains, running at different wavelengths and each delivering 500 W optical output power. The main amplifier stage consists of a large mode area photonic crystal fiber. The four output beams of the amplifier chains are spectrally (incoherent) combined using a polarization-independent dielectric reflective diffraction grating to form an output beam of 2 kW continuous-wave optical power with good beam quality (M2 x = 2.0, M2 y = 1.8).
- 16 January 2009
- Published by Optica Publishing Group in Optics Express
- Vol. 17 (3) , 1178-1183
Open Access2 kW incoherent beam combining of four narrow-linewidth photonic crystal fiber amplifiers
We report on beam combining of four narrow-linewidth fiber amplifier chains, running at different wavelengths and each delivering 500 W optical output power. The main amplifier stage consists of a large mode area photonic crystal fiber. The four output beams of the amplifier chains are spectrally (incoherent) combined using a polarization-independent dielectric reflective diffraction grating to form an output beam of 2 kW continuous-wave optical power with good beam quality (M2 x = 2.0, M2 y = 1.8).
- 1 January 2008
- Published by Optica Publishing Group
- p. WA6
1 kW narrow-linewidth fiber amplifier for spectral beam combining
We report on a narrow linewidth fiber amplifier system emitting a total output power of 1 kW. Limiting nonlinear effects like stimulated Raman and Brillouin scattering as well as self-phase modulation are discussed in detail.
- 1 January 2008
- Published by Optica Publishing Group
- p. WA6
1 kW narrow-linewidth fiber amplifier for spectral beam combining
We report on a narrow linewidth fiber amplifier system emitting a total output power of 1 kW. Limiting nonlinear effects like stimulated Raman and Brillouin scattering as well as self-phase modulation are discussed in detail.