CPChu-Sik Park

Chu-Sik Park

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chu-Sik Park has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Multipurpose Hydrogen Storage System Using AB5– and AB2–Type Metal Hydrides for Flexible Hydrogen Storage and Delivery

    by Pyoungjong Lee, Kwangjin Jung, Kyoungsoo Kang, Seonguk Jeong, Ki Bong Lee, Joonho Kim, Chusik Park

    Metal hydrides can safely store hydrogen in the solid state at high volumetric density under moderate temperature and pressure. Their hydrogen sorption characteristics are represented by pressure–composition–temperature (PCT) curves. AB5–type metal hydrides, which have low plateau pressures, store and release hydrogen at low pressures. AB2–type metal hydrides, which have high plateau pressures, store and release hydrogen at relatively high pressures. Compared with AB5–type metal hydrides, AB2–type metal hydrides generally have lower raw material costs and higher hydrogen storage capacity. This makes them more suitable for storing large quantities of hydrogen. Green and blue hydrogen are produced using commercial alkaline water electrolyzers and natural gas reformers, respectively. After downstream purification, this hydrogen is typically supplied at pressures below 1 MPa. However, the high plateau pressures of AB2–type metal hydrides make it difficult to store this low-pressure hydrogen directly. AB5–type metal hydrides can store it but release it only at low pressures. A single hydride type therefore operates within a narrow pressure range for both storage and delivery. In this study, a multipurpose hydrogen storage system (MHSS) using AB5– and AB2–type metal hydrides was proposed to broaden the applications of metal hydride-based systems. The feasibility of the MHSS was experimentally evaluated through lab-scale tests. The AB5 and AB2 modules were first tested as standalone units. The integrated MHSS was then tested assuming that waste heat was continuously available. The MHSS can store a large quantity of low-pressure hydrogen and deliver it across a wide pressure range. This range covers diverse end uses, from fuel cells at 0.5 MPa to hydrogen pipelines at 4.0 MPa.


  • Open Access

    Strain-Based Hydrogen Quantification in a Metal Hydride Vessel

    by Pyoungjong Lee, Kwangjin Jung, Kyoungsoo Kang, Seonguk Jeong, Ki Bong Lee, Chusik Park

    Metal hydrides store hydrogen in the solid state with high density and inherent safety, and their thermodynamic characteristics are typically described by the pressure–composition–isotherm (PCI) curve. In the plateau pressure region of the PCI curve, the equilibrium pressure remains nearly constant over a wide hydrogen concentration range, making conventional pressure-based methods unsuitable for quantifying the hydrogen amount in metal hydride vessels. This study proposes a strain-based method to quantify the hydrogen amount in a metal hydride vessel by measuring the strain induced on the metal hydride vessel surface due to the volumetric change of the metal hydride during hydrogen adsorption and desorption. The installation of strain gauges on the metal hydride vessel was verified using argon pressurization tests. The metal hydride was activated prior to controlled hydrogen desorption experiments aimed at quantifying the amount of hydrogen remaining in the vessel. A correlation between strain and hydrogen amount was obtained from experiments conducted at discrete measurement points. The hydrogen amount estimated using the strain-based method was further evaluated through continuous time-series desorption tests and showed good agreement with the results obtained from the mass flow controller (MFC)-based method, with a maximum difference of 4.5%. These results demonstrate that the proposed method provides a simple and reliable approach for quantifying the hydrogen amount in metal hydride vessels.

  • Open Access

    Effect of α-FeOOH in KOH Electrolytes on the Activity of NiO Electrodes in Alkaline Water Electrolysis for the Oxygen Evolution Reaction

    by Tae-Hyun Kim, Jae-Hee Jeon, Ji-Eun Kim, Kyoung-Soo Kang, Jaekyung Yoon, Chu-Sik Park, Kwangjin Jung, Taeyang Han, Heonjoong Lee, Hyunku Joo, et al.

    Iron cation impurities reportedly enhance the oxygen evolution reaction (OER) activity of Ni-based catalysts, and the enhancement of OER activity by Fe cations has been extensively studied. Meanwhile, Fe salts, such as iron hydroxide and iron oxyhydroxide, in the electrolyte improve the OER performance, but the distinct roles of Fe cations and Fe salts have not been fully clarified or differentiated. In this study, NiO electrodes were synthesized, and their OER performance was evaluated in KOH electrolytes containing goethite (α-FeOOH). Unlike Fe cations, which enhance the performance via incorporation into the NiO structure, α-FeOOH boosts OER activity by adsorbing onto the electrode surface. Surface analysis revealed trace amounts of α-FeOOH on the NiO surface, indicating that physical contact alone enables α-FeOOH to adsorb onto NiO. Moreover, interactions between α-FeOOH and NiO were observed, suggesting their potential role in OER activity enhancement. These findings suggest that Fe salts in the electrolyte influence OER performance and should be considered in the development of OER electrodes.


  • Open Access

    Effect of Fe on Calcined Ni(OH)2 Anode in Alkaline Water Electrolysis

    by Tae-Hyun Kim, Kee-Young Koo, Chu-Sik Park, Seong-Uk Jeong, Ji-Eun Kim, Su-Han Lee, Young-Ho Kim, Kyoung-Soo Kang

    Ni (hydr)oxide is a promising and inexpensive material for oxygen evolution reaction (OER) catalysts and is known to dramatically increase the activity when used with Fe. Herein, we basified a Ni(II) solution and coated layered Ni(OH)2 on Ni coins to prepare a template with high stability and activity. To evaluate the stability and catalytic activity during high-current-density operation, we analyzed the electrochemical and physicochemical properties before and after constant current (CC) operation. The electrode with a Ni(OH)2 surface exhibited higher initial activity than that with a NiO surface; however, after the OER operation at a high-current density, degradation occurred owing to structural destruction. The activity of the electrodes with a NiO surface improved after the CC operation because of the changes on the electrode-surface caused by the CC operation and the subsequent Fe incorporation from the Fe impurity in the electrolyte. After confirming the improvement in activity due to Fe, we prepared NiFe-oxide electrodes with improved catalytic activity and optimized the Ni precursor and Fe loading solution concentrations. The Ni-Fe oxide electrode prepared under the optimal concentrations exhibited an overpotential of 287 mV at a current density of 10 mA/cm2, and a tafel slope of 37 mV dec−1, indicating an improvement in the OER activity.


  • Open Access

    Effect of Plating Variables on Oxygen Evolution Reaction of Ni–Zn–Fe Electrodes for Alkaline Water Electrolysis

    by Su-Han Lee, Ji Eun Kim, Hyunku Joo, Chu-Sik Park, Seong-Uk Jeong, Kwangjin Jung, Young-Ho Kim, Kyoung-Soo Kang

    In this study, we investigated the oxygen evolution reaction (OER) characteristics of Ni–Zn–Fe electrodes by varying plating current density and Ni:Fe ratio in a plating bath. The activity of the OER increased up to the plating current density of 160 mA/cm2, as the Fe content of the deposited electrode increased and electrochemical surface area (ECSA) increased after Zn dealloying. However, for the plated electrode with higher than 160 mA/cm2 of current density, the change in composition caused by underpotential deposition led to decreased activity due to decreasing Fe content and diminishing Zn dealloying. Moreover, when the Ni:Fe ratio in the plating bath was varied, outstanding OER activity was observed at Ni:Fe = 2:1. When the Fe content of the bath increased beyond this ratio, Fe could not restrain Ni oxidation and formed Fe oxides in OER reaction, and oxygen vacancy decreased. These caused a degradation of the OER activity.


  • Heat Transfer Characteristics and Hydrogen Storage Kinetics of Metal Hydride-Expended Graphite Composite

    by Pyoungjong Lee, Jongwon Kim, Kikwang Bae, Seonguk Jeong, Kyoungsoo Kang, Kwangjin Jung, Chusik Park, Youngho Kim


  • Hydrogen Storage and Release Properties for Compacted Ti-Mn Alloy

    by Jong Seok Kim, Won Bi Han, Hyun Suk Cho, Moon Sun Jeong, Seong Uk Jeong, Won Chul Cho, Kyoung Soo Kang, Chang Hee Kim, Ki Kwang Bae, Chu Sik Park


  • Characterization of Ni-Fe Alloy Electrodeposited Electrode for Alkaline Water Electrolysis

    by Da-Sol An, Ki-Kwang Bae, Chu-Sik Park, Chang-Hee Kim, Koung-Soo Kang, Won-Chul Cho, Hyun-Seok Cho, Young-Ho Kim, Seong-Uk Jeong

  • Open Access

    Characteristic of the Pressurized Continuous Bunsen Reaction using HIxSolution

    by Jong-Seok Kim, Chu-Sik Park, Kyoung-Soo Kang, Seong-Uk Jeong, Won-Chul Cho, Chang-Hee Kim, Young-Ho Kim, Ki-Kwang Bae