Simon Hettler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Simon Hettler has a total of 197 co-authors. Here are the top co-authors by number of shared publications:
- Raul Arenal
Instituto de Nanociencia y Materiales de Aragón (INMA) CSIC‐University of Zaragoza Zaragoza Spain
23 shared publications Dagmar Gerthsen
Laboratory for Electron Microscopy, Karlsruhe Institute of Technology (KIT), Engesserstraße 7, 76131 Karlsruhe, Germany
14 shared publicationsManuel Dries
Laboratory for Electron Microscopy, Karlsruhe Institute of Technology, Engesserstrasse 7, Karlsruhe 76131, Germany
11 shared publicationsD. Gerthsen
Laboratory for Electron Microscopy (LEM) Karlsruhe Institute of Technology (KIT) Karlsruhe Germany
6 shared publications- M. B. Sreedhara
Solid State and Structural Chemistry Unit, Indian Institute of Science, Bengaluru, 560012, India
6 shared publications - Reshef Tenne
Department of Molecular Chemistry and Materials Science, Weizmann Institute of Science, Herzl 234 St, Rehovot 7610001, Israel
6 shared publications
Latest Publications
- 1 July 2026
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 32 (4)
Preserving the Crystal Structure of Organic Semiconductors During Cross-Sectional Specimen Preparation for Transmission Electron Microscopy Using a Focused Ion Beam
Transmission electron microscopy (TEM) analyses of cross-sectional lamellae prepared by a Ga+-focused ion beam are frequently applied in a variety of scientific disciplines where high-resolution information is required from a specific site of interest. Radiation-sensitive materials thereby require dedicated methods to facilitate an analysis of the specimen in its pristine state. Here, we present a method for preparing TEM lamellae of organic thin-film transistors that preserves morphology and crystal structure of beam-sensitive small-molecule organic semiconductor thin films as demonstrated for pentacene, dinaphtho[2,3-b:2 ′,3 ′-f]thieno[3,2-b]thiophene (DNTT), and phenylalkyl-substituted 3,4,9,10-benzo[de]isoquinolino[1,8-gh]-quinolinetetra-carboxylic diimide (PhC2-BQQDI). The two key measures are minimizing electron and ion irradiation of the organic layer using protective layers and optimized beam conditions, and performing the final lamella thinning at reduced temperature. Monte-Carlo simulations can help to find the optimum beam settings, but channeling of electrons and ions, typically not considered in the simulations, can lead to an increased penetration depth and needs to be taken into account. As proof of concept for a successful TEM sample preparation workflow we demonstrate the edge-on growth of all investigated molecules with structural integrity. Furthermore, the zone axes for pentacene and DNTT and the existence of a previously unknown thin-film polymorph of the organic semiconductor PhC2-BQQDI are identified.
- 1 July 2026
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 32 (4)
Preserving the Crystal Structure of Organic Semiconductors During Cross-Sectional Specimen Preparation for Transmission Electron Microscopy Using a Focused Ion Beam
Transmission electron microscopy (TEM) analyses of cross-sectional lamellae prepared by a Ga+-focused ion beam are frequently applied in a variety of scientific disciplines where high-resolution information is required from a specific site of interest. Radiation-sensitive materials thereby require dedicated methods to facilitate an analysis of the specimen in its pristine state. Here, we present a method for preparing TEM lamellae of organic thin-film transistors that preserves morphology and crystal structure of beam-sensitive small-molecule organic semiconductor thin films as demonstrated for pentacene, dinaphtho[2,3-b:2 ′,3 ′-f]thieno[3,2-b]thiophene (DNTT), and phenylalkyl-substituted 3,4,9,10-benzo[de]isoquinolino[1,8-gh]-quinolinetetra-carboxylic diimide (PhC2-BQQDI). The two key measures are minimizing electron and ion irradiation of the organic layer using protective layers and optimized beam conditions, and performing the final lamella thinning at reduced temperature. Monte-Carlo simulations can help to find the optimum beam settings, but channeling of electrons and ions, typically not considered in the simulations, can lead to an increased penetration depth and needs to be taken into account. As proof of concept for a successful TEM sample preparation workflow we demonstrate the edge-on growth of all investigated molecules with structural integrity. Furthermore, the zone axes for pentacene and DNTT and the existence of a previously unknown thin-film polymorph of the organic semiconductor PhC2-BQQDI are identified.
- Open Access
- 18 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (12) , 18073-18081
Transmission Electron Microscopy Analysis of the Microstructure of Nanocrystalline Small-Molecule Semiconductors in Functional Organic Thin-Film Transistors
Transmission electron microscopy has been employed to investigate the microstructure of nanocrystalline vacuum-deposited thin films of the small-molecule organic semiconductor 2,9-diphenyl-dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DPh-DNTT) in functional bottom-gate organic thin-film transistors (TFTs) using both cross-sectional and plan-view specimens. Since the charge transport in organic TFTs is confined to the first molecular layer adjacent to the interface with the gate dielectric, the microstructure of this first molecular layer is of critical importance for the TFT performance, and transmission electron microscopy (TEM) is the most powerful technique to analyze this buried molecular layer. Direct imaging reveals that the DPh-DNTT molecules are oriented edge-on with their long axis in the vertical configuration with respect to the gate dielectric surface. An additional phase in which the DPh-DNTT molecules are oriented in the face-on configuration is observed in the protrusions that typically form in vacuum-deposited DPh-DNTT thin films; however, this face-on configuration is found only on top of layers in which the DPh-DNTT molecules are in the edge-on configuration. This suggests that the edge-on configuration serves as a template for the growth of the face-on configuration.
- 18 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (12) , 18073-18081
Open AccessTransmission Electron Microscopy Analysis of the Microstructure of Nanocrystalline Small-Molecule Semiconductors in Functional Organic Thin-Film Transistors
Transmission electron microscopy has been employed to investigate the microstructure of nanocrystalline vacuum-deposited thin films of the small-molecule organic semiconductor 2,9-diphenyl-dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DPh-DNTT) in functional bottom-gate organic thin-film transistors (TFTs) using both cross-sectional and plan-view specimens. Since the charge transport in organic TFTs is confined to the first molecular layer adjacent to the interface with the gate dielectric, the microstructure of this first molecular layer is of critical importance for the TFT performance, and transmission electron microscopy (TEM) is the most powerful technique to analyze this buried molecular layer. Direct imaging reveals that the DPh-DNTT molecules are oriented edge-on with their long axis in the vertical configuration with respect to the gate dielectric surface. An additional phase in which the DPh-DNTT molecules are oriented in the face-on configuration is observed in the protrusions that typically form in vacuum-deposited DPh-DNTT thin films; however, this face-on configuration is found only on top of layers in which the DPh-DNTT molecules are in the edge-on configuration. This suggests that the edge-on configuration serves as a template for the growth of the face-on configuration.
- Open Access
- 1 March 2026
- Published by IOP Publishing in New Journal of Physics
- Vol. 28 (3) , 033504
Mechanical and electrical properties of a nano-gap or how to play the nano-accordion
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m −1 . These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
- 1 March 2026
- Published by IOP Publishing in New Journal of Physics
- Vol. 28 (3) , 033504
Open AccessMechanical and electrical properties of a nano-gap or how to play the nano-accordion
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m −1 . These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
- Open Access
Mechanical and electrical properties of a nano-gap or how to play the nano-accordion
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo)electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices' electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents. These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
Open AccessMechanical and electrical properties of a nano-gap or how to play the nano-accordion
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo)electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices' electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents. These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
- Open Access
- 21 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (30) , 13803-13812
Unraveling the Decomposition Pathways of LaS-TaS2 Misfit-Layered Compound Nanostructures under Extreme Electrical Currents by In Situ TEM
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors.
- 21 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (30) , 13803-13812
Open AccessUnraveling the Decomposition Pathways of LaS-TaS2 Misfit-Layered Compound Nanostructures under Extreme Electrical Currents by In Situ TEM
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors.
- 12 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (25) , 13024-13036
Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications
- 12 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (25) , 13024-13036
Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications
- Open Access
- 28 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (13) , 9605-9617
Structure and properties of tubular structures based on the quaternary misfit layered compound Sm 1− x Y x S–TaS 2
Nanotubes made of the quaternary misfit layered compound Sm 1− x Y x S–TaS 2 have been synthesized using the chemical vapour technique. Imaging, diffraction and spectroscopy shed light on their structure and properties.
- 28 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (13) , 9605-9617
Open AccessStructure and properties of tubular structures based on the quaternary misfit layered compound Sm 1− x Y x S–TaS 2
Nanotubes made of the quaternary misfit layered compound Sm 1− x Y x S–TaS 2 have been synthesized using the chemical vapour technique. Imaging, diffraction and spectroscopy shed light on their structure and properties.
- Open Access
- 13 March 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (16) , 10205-10218
Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications
This study yields ferrite magnetic nanoparticles with a lower effective anisotropy constant, key for magnetic hyperthermia, and a vanadium-rich shell, important for catalysis.
- 13 March 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (16) , 10205-10218
Open AccessVanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications
This study yields ferrite magnetic nanoparticles with a lower effective anisotropy constant, key for magnetic hyperthermia, and a vanadium-rich shell, important for catalysis.