Duygu Kocaefe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Duygu Kocaefe has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Yasar Kocaefe
University of Quebec at Chicoutimi UQAC Research Chair on Industrial Materials (CHIMI) 555, boul. de l'Université G7H 2B1 Chicoutimi (Quebec) Canada
7 shared publicationsRamdane Younsi
University of Quebec at Chicoutimi
3 shared publications- Ramdane Younsi
University of Quebec at Chicoutimi , Department of Applied Sciences , Chicoutimi, Quebec, Canada
3 shared publications Sandor Poncsak
University of Quebec at Chicoutimi
3 shared publicationsXianai Huang
Université du Québec à Chicoutimi 555, boul. de l'Université Chicoutimi Québec Canada G7H 2B1
3 shared publicationsYaman Boluk
University of Alberta, Canada 3‐142 Markin/CNRL Natural Resources Engineering Facility Edmonton Alberta Canada T6G 2W2
3 shared publications
Latest Publications
- 13 February 2019
- Published by Wiley in Chemical Engineering & Technology
- Vol. 42 (5) , 1011-1017
Colorimetric Methods for Determining Fe, V, and Ni Contents in Coke and Anodes
- 13 February 2019
- Published by Wiley in Chemical Engineering & Technology
- Vol. 42 (5) , 1011-1017
Colorimetric Methods for Determining Fe, V, and Ni Contents in Coke and Anodes
- 12 February 2017
- Published by Springer Nature
- p. 1247-1254
Development of Techniques and Tools for the Determination of Carbon Anode Quality
- 12 February 2017
- Published by Springer Nature
- p. 1247-1254
Development of Techniques and Tools for the Determination of Carbon Anode Quality
- 9 July 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (2) , 639-649
Quantitative characterization of chemical degradation of heat‐treated wood surfaces during artificial weathering using XPS
The X‐ray photoelectron spectroscopy (XPS) study of three heat‐treated North American wood species (jack pine, birch and aspen) was carried out to evaluate chemical modifications occurring on the wood surface during artificial weathering for different times. The results suggest that the weathering reduces lignin content (aromatic rings) at the surface of heat‐treated wood, consequently, the carbohydrates content increases. This results in surfaces richer in cellulose and poorer in lignin. Heat‐treated wood surfaces become acidic due to weathering, and the acidity increases as the weathering time increases. Three possible reasons are given to account for the increase of acidity during weathering. The lignin content increases, whereas the hemicelluloses content decrease due to heat treatment. Heat‐treated woods have lower acidity to basicity ratios than the corresponding untreated woods for all three species because of the decrease in carboxylic acid functions mainly present in hemicelluloses. The wood composition changes induced by weathering are more significant compared to those induced by heat treatment at wood surface. Exposure to higher temperatures causes more degradation of hemicelluloses, and this characteristic is maintained during weathering. However, the wood direction has more effect on chemical composition modification during weathering compared to that of heat treatment temperature. The heat‐treated jack pine is affected most by weathering followed by heat‐treated aspen and birch. This is related to differences in content and structure of lignin of softwood and hardwood. The use of XPS technique has proved to be a reliable method for wood surface studies. Copyright © 2012 John Wiley & Sons, Ltd.
- 9 July 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (2) , 639-649
Quantitative characterization of chemical degradation of heat‐treated wood surfaces during artificial weathering using XPS
The X‐ray photoelectron spectroscopy (XPS) study of three heat‐treated North American wood species (jack pine, birch and aspen) was carried out to evaluate chemical modifications occurring on the wood surface during artificial weathering for different times. The results suggest that the weathering reduces lignin content (aromatic rings) at the surface of heat‐treated wood, consequently, the carbohydrates content increases. This results in surfaces richer in cellulose and poorer in lignin. Heat‐treated wood surfaces become acidic due to weathering, and the acidity increases as the weathering time increases. Three possible reasons are given to account for the increase of acidity during weathering. The lignin content increases, whereas the hemicelluloses content decrease due to heat treatment. Heat‐treated woods have lower acidity to basicity ratios than the corresponding untreated woods for all three species because of the decrease in carboxylic acid functions mainly present in hemicelluloses. The wood composition changes induced by weathering are more significant compared to those induced by heat treatment at wood surface. Exposure to higher temperatures causes more degradation of hemicelluloses, and this characteristic is maintained during weathering. However, the wood direction has more effect on chemical composition modification during weathering compared to that of heat treatment temperature. The heat‐treated jack pine is affected most by weathering followed by heat‐treated aspen and birch. This is related to differences in content and structure of lignin of softwood and hardwood. The use of XPS technique has proved to be a reliable method for wood surface studies. Copyright © 2012 John Wiley & Sons, Ltd.
- 31 March 2012
- Published by Springer Nature in Wood Science and Technology
- Vol. 46 (6) , 1215-1237
Changes in wettability of heat-treated wood due to artificial weathering
- 31 March 2012
- Published by Springer Nature in Wood Science and Technology
- Vol. 46 (6) , 1215-1237
Changes in wettability of heat-treated wood due to artificial weathering
- 29 March 2012
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 70 (5) , 711-717
Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids
- 29 March 2012
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 70 (5) , 711-717
Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids
- 1 February 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (3) , 681-687
Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study
- 1 February 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (3) , 681-687
Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study
- 30 November 2009
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 33 (11) , 4013-4030
2D transient filtration model for aluminum
- 30 November 2009
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 33 (11) , 4013-4030
2D transient filtration model for aluminum
- 11 February 2009
- Published by Springer Nature in Wood Science and Technology
- Vol. 43 (5-6) , 471-486
Thermal treatment of electrical poles
- 11 February 2009
- Published by Springer Nature in Wood Science and Technology
- Vol. 43 (5-6) , 471-486
Thermal treatment of electrical poles
- 7 November 2008
- Published by Wiley in Surface and Interface Analysis
- Vol. 40 (12) , 1516-1522
Determining the wettability of granular alumina by aluminum–magnesium alloys using the infiltration method
Wettability of the granular bed media influences the efficiency of aluminum filtration. This project was undertaken to develop a method for determining the wettability of the granular media in order to evaluate its suitability for filtration. The wetting characteristics of different granular alumina particles by aluminum–magnesium alloys were studied using the infiltration method. The contact angles for rough as well as smooth surfaces were determined, and alumina particles were classified according to their wetting characteristics. The results were consistent and showed that it is possible to differentiate the wetting characteristics of different alumina samples with the infiltration method. A capillary model based on the energy balance was developed to analyze the experimental data. The model uses an average capillary pore size. For one type of alumina, this model was extended to carry out the analysis using a capillary pore size distribution. Similar results were found in both cases. This paper describes the experimental and modeling work, and the results are presented and discussed. Copyright © 2008 John Wiley & Sons, Ltd.
- 7 November 2008
- Published by Wiley in Surface and Interface Analysis
- Vol. 40 (12) , 1516-1522
Determining the wettability of granular alumina by aluminum–magnesium alloys using the infiltration method
Wettability of the granular bed media influences the efficiency of aluminum filtration. This project was undertaken to develop a method for determining the wettability of the granular media in order to evaluate its suitability for filtration. The wetting characteristics of different granular alumina particles by aluminum–magnesium alloys were studied using the infiltration method. The contact angles for rough as well as smooth surfaces were determined, and alumina particles were classified according to their wetting characteristics. The results were consistent and showed that it is possible to differentiate the wetting characteristics of different alumina samples with the infiltration method. A capillary model based on the energy balance was developed to analyze the experimental data. The model uses an average capillary pore size. For one type of alumina, this model was extended to carry out the analysis using a capillary pore size distribution. Similar results were found in both cases. This paper describes the experimental and modeling work, and the results are presented and discussed. Copyright © 2008 John Wiley & Sons, Ltd.
- 19 March 2008
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 44 (12) , 1497-1509
CFD modeling and experimental validation of heat and mass transfer in wood poles subjected to high temperatures: a conjugate approach
- 19 March 2008
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 44 (12) , 1497-1509
CFD modeling and experimental validation of heat and mass transfer in wood poles subjected to high temperatures: a conjugate approach