S. Schmigalla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
S. Schmigalla has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Heyn
Otto-von-Guericke-University Magdeburg, Faculty of Mechanical Engineering, Institute of Materials and Joining Technology, Universitätsplatz 2, 39106 Magdeburg, Germany
3 shared publications J. Schmidt
1 shared publicationM. Zinke
Otto‐von‐Guericke‐Universität Magdeburg IWF, P.O. Box 4120 39016 Magdeburg (Germany)
1 shared publication- Norbert Hort
Helmholtz-Zentrum Hereon
1 shared publication S. Bender
Institut für Lacke und Farben e.V., Fichtestr. 29, 39112 Magdeburg (Germany)
1 shared publicationS. Krasnorutskyi
TU Braunschweig, IfS 38092 Braunschweig (Germany)
1 shared publication
Latest Publications
- 17 February 2014
- Published by Wiley in Materials and Corrosion
- Vol. 66 (5) , 442-452
Corrosion behavior of electron beam welded duplex stainless steels
The corrosion behavior of duplex stainless steels is strongly affected by the austenite–ferrite ratio. With regard to corrosion resistance as well as mechanical properties a balanced ratio between these two microstructural components is desired. Weld seams manufactured by electron beam welding (EBW) generally exhibit very high amounts of ferrite due to a strong loss of nitrogen during the welding process and a very high cooling rate, which can affect the corrosion behavior adversely. Significant improvements can be reached by varying the electron beam guidance and applying multi‐beam technology. This paper considers the pitting corrosion as well as selective corrosion behavior of the welds as a function of the chosen process parameters during EBW. Comparisons with the corrosion performance of manual metal arc and tungsten inert gas welds are also made.
- 17 February 2014
- Published by Wiley in Materials and Corrosion
- Vol. 66 (5) , 442-452
Corrosion behavior of electron beam welded duplex stainless steels
The corrosion behavior of duplex stainless steels is strongly affected by the austenite–ferrite ratio. With regard to corrosion resistance as well as mechanical properties a balanced ratio between these two microstructural components is desired. Weld seams manufactured by electron beam welding (EBW) generally exhibit very high amounts of ferrite due to a strong loss of nitrogen during the welding process and a very high cooling rate, which can affect the corrosion behavior adversely. Significant improvements can be reached by varying the electron beam guidance and applying multi‐beam technology. This paper considers the pitting corrosion as well as selective corrosion behavior of the welds as a function of the chosen process parameters during EBW. Comparisons with the corrosion performance of manual metal arc and tungsten inert gas welds are also made.
- 11 March 2013
- Published by Wiley in Materials and Corrosion
- Vol. 64 (8) , 700-707
Determination of critical pitting temperatures for Ni-Cr-Mo alloys using electrochemical noise measurements
The determination of critical pitting temperatures (CPT) in various test solutions like ferric chloride solution according to ASTM G48 or “Green Death” solution is a common test method for the comparative assessment of the pitting corrosion resistance of highly alloyed steels and NiCrMo alloys. In addition to the well‐known disadvantages of standard methods, like long test times, subjective examination, and large scatter, for the highest alloyed NiCrMo alloys no stable pitting corrosion can initiate even at the highest test temperatures. This paper describes the limitations of standard test methods and shows how these problems can be solved by an alternative test solution and an adjusted test method. By capturing and examining the current noise under potentiostatic conditions during continuous heating in a 4.5 M calcium chloride solution the transition from metastable to stable pitting corrosion as a criterion for CPT can be detected in a reproducible way.
- 11 March 2013
- Published by Wiley in Materials and Corrosion
- Vol. 64 (8) , 700-707
Determination of critical pitting temperatures for Ni-Cr-Mo alloys using electrochemical noise measurements
The determination of critical pitting temperatures (CPT) in various test solutions like ferric chloride solution according to ASTM G48 or “Green Death” solution is a common test method for the comparative assessment of the pitting corrosion resistance of highly alloyed steels and NiCrMo alloys. In addition to the well‐known disadvantages of standard methods, like long test times, subjective examination, and large scatter, for the highest alloyed NiCrMo alloys no stable pitting corrosion can initiate even at the highest test temperatures. This paper describes the limitations of standard test methods and shows how these problems can be solved by an alternative test solution and an adjusted test method. By capturing and examining the current noise under potentiostatic conditions during continuous heating in a 4.5 M calcium chloride solution the transition from metastable to stable pitting corrosion as a criterion for CPT can be detected in a reproducible way.
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (7) , 578-584
Investigation of biodegradation behaviour of an Mg-1Ca alloy influenced by heat treatment and applying plasma-chemical oxidation layers
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (7) , 578-584
Investigation of biodegradation behaviour of an Mg-1Ca alloy influenced by heat treatment and applying plasma-chemical oxidation layers