Hyung-Min Choi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hyung-Min Choi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Kyung Wha Oh
Department of Fashion, Chung-Ang University, Seoul 06974, Korea
4 shared publications Jae Yeoun Cho
Department of Organic Materials and Fiber Engineering, Soongsil University, Seoul, Korea
3 shared publicationsJi Hwan Park
Department of Organic Materials and Fiber Engineering, Soongsil University, South Korea
2 shared publicationsCheol-Jae Hong
Department of Organic Materials and Fiber Engineering, Soongsil University, Seoul, Republic of Korea 156-743
1 shared publicationFrank LoGerfo
Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts 02115
1 shared publication- Frank W. LoGerfo
Division of Vascular and Endovascular Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA, USA
1 shared publication
Latest Publications
- Open Access
Self-Healing EPDM Rubbers with Highly Stable and Mechanically-Enhanced Urea-Formaldehyde (UF) Microcapsules Prepared by Multi-Step In Situ Polymerization
The mechanically-enhanced urea-formaldehyde (UF) microcapsules are developed through a multi-step in situ polymerization method. Optical microscope (OM) and field emission scanning electron microscope (FE-SEM) prove that the microcapsules, 147.4 μm in diameter with a shell thickness of 600 nm, are well-formed. From 1H-nuclear magnetic resonance (1H-NMR) analysis, we found that dicyclopentadiene (DCPD), a self-healing agent encapsulated by the microcapsules, occupies ca. 40.3 %(v/v) of the internal volume of a single capsule. These microcapsules are mixed with EPDM (ethylene-propylene-diene-monomer) and Grubbs’ catalyst via a solution mixing method, and universal testing machine (UTM) tests show that the composites with mechanically-enhanced microcapsules has ca. 47% higher toughness than the composites with conventionally prepared UF microcapsules, which is attributed to the improved mechanical stability of the microcapsule. When the EPDM/microcapsule rubber composites are notched, Fourier-transform infrared (FT-IR) spectroscopy shows that DCPD leaks from the broken microcapsule to the damaged site and flows to fill the notched valley, and self-heals as it is cured by Grubbs’ catalyst. The self-healing efficiency depends on the capsule concentration in the EPDM matrix. However, the self-healed EPDM/microcapsule rubber composite with over 15 wt% microcapsule shows an almost full recovery of the mechanical strength and 100% healing efficiency.
Open AccessSelf-Healing EPDM Rubbers with Highly Stable and Mechanically-Enhanced Urea-Formaldehyde (UF) Microcapsules Prepared by Multi-Step In Situ Polymerization
The mechanically-enhanced urea-formaldehyde (UF) microcapsules are developed through a multi-step in situ polymerization method. Optical microscope (OM) and field emission scanning electron microscope (FE-SEM) prove that the microcapsules, 147.4 μm in diameter with a shell thickness of 600 nm, are well-formed. From 1H-nuclear magnetic resonance (1H-NMR) analysis, we found that dicyclopentadiene (DCPD), a self-healing agent encapsulated by the microcapsules, occupies ca. 40.3 %(v/v) of the internal volume of a single capsule. These microcapsules are mixed with EPDM (ethylene-propylene-diene-monomer) and Grubbs’ catalyst via a solution mixing method, and universal testing machine (UTM) tests show that the composites with mechanically-enhanced microcapsules has ca. 47% higher toughness than the composites with conventionally prepared UF microcapsules, which is attributed to the improved mechanical stability of the microcapsule. When the EPDM/microcapsule rubber composites are notched, Fourier-transform infrared (FT-IR) spectroscopy shows that DCPD leaks from the broken microcapsule to the damaged site and flows to fill the notched valley, and self-heals as it is cured by Grubbs’ catalyst. The self-healing efficiency depends on the capsule concentration in the EPDM matrix. However, the self-healed EPDM/microcapsule rubber composite with over 15 wt% microcapsule shows an almost full recovery of the mechanical strength and 100% healing efficiency.
- Open Access
- 7 August 2019
- Published by Ghent University
1A1_0422_ ECO- AND AQUA-FRIENDLY NANO CRYSTALLINE CELLULOSE PREPARATION UNDER DEEP EUTECTIC SOLVENT
Water soluble esterified nanocellulose (ENC) was prepared with various anhydrides in expeditious, yet ecofriendly ways by using deep eutectic solvent (DES), ultrasonic and microwave irradiation. Phthalic anhydride and DES made of oxalic acid and choline chloride were mainly used as a reagent and solvent. Results indicated that shape and size of ENC could be varied by preparation methods. Analyses of ENC suggested that oxalic acid participated as both solvent and reactant, forming various types of anhydrides with reagent and cellulose. Characterization of ENC was performed by various instruments such as FTIR, TGA, X-ray diffraction, SEM, and zeta potential analyzer.
- 7 August 2019
- Published by Ghent University
Open Access1A1_0422_ ECO- AND AQUA-FRIENDLY NANO CRYSTALLINE CELLULOSE PREPARATION UNDER DEEP EUTECTIC SOLVENT
Water soluble esterified nanocellulose (ENC) was prepared with various anhydrides in expeditious, yet ecofriendly ways by using deep eutectic solvent (DES), ultrasonic and microwave irradiation. Phthalic anhydride and DES made of oxalic acid and choline chloride were mainly used as a reagent and solvent. Results indicated that shape and size of ENC could be varied by preparation methods. Analyses of ENC suggested that oxalic acid participated as both solvent and reactant, forming various types of anhydrides with reagent and cellulose. Characterization of ENC was performed by various instruments such as FTIR, TGA, X-ray diffraction, SEM, and zeta potential analyzer.
- 31 August 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (43)
Production of zwitterionic cellulose by citric acid and triethanolamine hydrochloride for various end uses
Zwitterionic cellulose was produced by the reaction of citric acid (CA) and triethanolamine hydrochloride (HTEA) on cotton fabrics with the pad–dry–cure method. The wrinkle resistance, dye affinity to anionic dye, antimicrobial properties, and zwitterionic properties were considerably improved. The fixation of CA and HTEA in cotton was confirmed by the wrinkle recovery angle, thermogravimetric analysis, and Fourier transform infrared spectroscopy. Elemental analysis and anionic dye sorption testing also substantiated the HTEA fixation. The X‐ray diffraction and scanning electron microscopy results suggest that CA and HTEA were fixed in the amorphous region of cotton with little surface deposition. The zwitterionic properties of the treated cotton was studied with a cationic dye at various pHs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46840.
- 31 August 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (43)
Production of zwitterionic cellulose by citric acid and triethanolamine hydrochloride for various end uses
Zwitterionic cellulose was produced by the reaction of citric acid (CA) and triethanolamine hydrochloride (HTEA) on cotton fabrics with the pad–dry–cure method. The wrinkle resistance, dye affinity to anionic dye, antimicrobial properties, and zwitterionic properties were considerably improved. The fixation of CA and HTEA in cotton was confirmed by the wrinkle recovery angle, thermogravimetric analysis, and Fourier transform infrared spectroscopy. Elemental analysis and anionic dye sorption testing also substantiated the HTEA fixation. The X‐ray diffraction and scanning electron microscopy results suggest that CA and HTEA were fixed in the amorphous region of cotton with little surface deposition. The zwitterionic properties of the treated cotton was studied with a cationic dye at various pHs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46840.
- 4 December 2017
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (3) , 335-346
Synthesis and characterization of a dyeable bio-based polyurethane/branched poly(ethylene imine) interpenetrating polymer network with enhanced wet fastness
Bio-based polyurethane is synthesized from biodegradable polycaprolactone, methylene diphenyl diisocyanate and 1,4-butanediol. The bio-based polyurethane is blended with branched polyethyleneimine by a solution casting method and further treated with glutaraldehyde. From nuclear magnetic resonance, Fourier-transform infrared spectroscopy, leaching tests and contact angle measurements, it was found that a semi-interpenetrating polymer network structure is induced by the glutaraldehyde treatment of the bio-based polyurethane/branched polyethyleneimine blend film, which resulting from the crosslinking of branched polyethyleneimine by imine bonds formed from the amine-aldehyde reaction between branched polyethyleneimine and glutaraldehyde. In addition, the glass transition temperature, Young’s modulus and the shape retention results show that the mechanical strength of bio-based polyurethane, which is weakened by the plasticizing effect of branched polyethyleneimine, is restored by the formation of the semi-interpenetrating network structure. We found that the bio-based polyurethane/branched polyethyleneimine with a semi-interpenetrating network shows a much higher affinity for Acid Red 4 than bio-based polyurethane, and the wet fastness of dye is significantly improved by the formation of the semi-interpenetrating network.
- 4 December 2017
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (3) , 335-346
Synthesis and characterization of a dyeable bio-based polyurethane/branched poly(ethylene imine) interpenetrating polymer network with enhanced wet fastness
Bio-based polyurethane is synthesized from biodegradable polycaprolactone, methylene diphenyl diisocyanate and 1,4-butanediol. The bio-based polyurethane is blended with branched polyethyleneimine by a solution casting method and further treated with glutaraldehyde. From nuclear magnetic resonance, Fourier-transform infrared spectroscopy, leaching tests and contact angle measurements, it was found that a semi-interpenetrating polymer network structure is induced by the glutaraldehyde treatment of the bio-based polyurethane/branched polyethyleneimine blend film, which resulting from the crosslinking of branched polyethyleneimine by imine bonds formed from the amine-aldehyde reaction between branched polyethyleneimine and glutaraldehyde. In addition, the glass transition temperature, Young’s modulus and the shape retention results show that the mechanical strength of bio-based polyurethane, which is weakened by the plasticizing effect of branched polyethyleneimine, is restored by the formation of the semi-interpenetrating network structure. We found that the bio-based polyurethane/branched polyethyleneimine with a semi-interpenetrating network shows a much higher affinity for Acid Red 4 than bio-based polyurethane, and the wet fastness of dye is significantly improved by the formation of the semi-interpenetrating network.
- 1 June 2016
- Published by Springer Nature in Fibers and Polymers
- Vol. 17 (6) , 847-856
Microwave-mediated rapid tailoring of PET fabric surface by using environmentally-benign, biodegradable Urea-Choline chloride Deep eutectic solvent
- 1 June 2016
- Published by Springer Nature in Fibers and Polymers
- Vol. 17 (6) , 847-856
Microwave-mediated rapid tailoring of PET fabric surface by using environmentally-benign, biodegradable Urea-Choline chloride Deep eutectic solvent
- 22 October 2015
- Published by SAGE Publications in Textile Research Journal
- Vol. 86 (12) , 1318-1327
Rapid hydrophilic modification of poly(ethylene terephthalate) surface by using deep eutectic solvent and microwave irradiation
Rapid hydrophilic modification of poly(ethylene terephthalate) (PET) fabric was carried out by deep eutectic solvent, ethylene glycol-choline chloride (EGC), under microwave irradiation. EGC is an inexpensive eco-friendly solvent, which is easy to handle along with low toxicity. Results showed that alkali concentration and microwave irradiation time were critical factors in determining surface characteristics of PET. The EGC-treated PET fabric showed highly hydrophobic surface with long wicking time (>2000 s) and high contact angle (135°) at 60 s of microwave irradiation time. However, by merely adding 0.5% sodium hydroxide, the EGC-treated PET fabric surface was drastically changed to highly hydrophilic surface with instant wicking time. The structure of modified PET was studied by various instrumental analyses such as Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Tensile strength and methylene blue staining tests were also carried out to determine characteristics of the modified PET fabrics.
- 22 October 2015
- Published by SAGE Publications in Textile Research Journal
- Vol. 86 (12) , 1318-1327
Rapid hydrophilic modification of poly(ethylene terephthalate) surface by using deep eutectic solvent and microwave irradiation
Rapid hydrophilic modification of poly(ethylene terephthalate) (PET) fabric was carried out by deep eutectic solvent, ethylene glycol-choline chloride (EGC), under microwave irradiation. EGC is an inexpensive eco-friendly solvent, which is easy to handle along with low toxicity. Results showed that alkali concentration and microwave irradiation time were critical factors in determining surface characteristics of PET. The EGC-treated PET fabric showed highly hydrophobic surface with long wicking time (>2000 s) and high contact angle (135°) at 60 s of microwave irradiation time. However, by merely adding 0.5% sodium hydroxide, the EGC-treated PET fabric surface was drastically changed to highly hydrophilic surface with instant wicking time. The structure of modified PET was studied by various instrumental analyses such as Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Tensile strength and methylene blue staining tests were also carried out to determine characteristics of the modified PET fabrics.
- 7 June 2013
- Published by Springer Nature in Cellulose
- Vol. 20 (4) , 2101-2114
Preparation and characterization of cotton fabrics with antibacterial properties treated by crosslinkable benzophenone derivative in choline chloride-based deep eutectic solvents
- 7 June 2013
- Published by Springer Nature in Cellulose
- Vol. 20 (4) , 2101-2114
Preparation and characterization of cotton fabrics with antibacterial properties treated by crosslinkable benzophenone derivative in choline chloride-based deep eutectic solvents
- 31 January 2013
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 52 (6) , 2309-2315
Microwave-Assisted Glycolysis for PET with Highly Hydrophilic Surface
- 31 January 2013
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 52 (6) , 2309-2315
Microwave-Assisted Glycolysis for PET with Highly Hydrophilic Surface