Jerzy Wolowski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jerzy Wolowski has a total of 143 co-authors. Here are the top co-authors by number of shared publications:
- Jan Badziak
Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw, Poland
17 shared publications P. Parys
Institute of Plasma Physics and Laser Microfusion, Association EURATOM – IPPLM Laser Plasmas Division , Warsaw, Poland
11 shared publicationsE. Woryna
Inst. of Plasma Phys. & Laser Microfusion, Warsaw, Poland
7 shared publicationsK. Rohlena
Institute of Physics, Academy of Science of the Czech Republic, Prague, CR
7 shared publications- Marcin Rosinski
Institute of Plasma Physics and Laser Microfusion
6 shared publications - Heinrich Hora
Department of Theoretical Physics, University of New South Wales, Sydney 2052, Australia
5 shared publications
Latest Publications
- 22 November 2011
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 53 (12)
The HiPER project for inertial confinement fusion and some experimental results on advanced ignition schemes
- 22 November 2011
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 53 (12)
The HiPER project for inertial confinement fusion and some experimental results on advanced ignition schemes
- 5 May 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8080, 808027
Experimental results performed in the framework of the HIPER European Project
This paper presents the goals and some of the results of experiments conducted within the Working Package 10 (Fusion Experimental Programme) of the HiPER Project. These experiments concern the study of the physics connected to "Advanced Ignition Schemes", i.e. the Fast Ignition and the Shock Ignition Approaches to Inertial Fusion. Such schemes are aimed at achieving a higher gain, as compared to the classical approach which is used in NIF, as required for future reactors, and making fusion possible with smaller facilities. In particular, a series of experiments related to Fast Ignition were performed at the RAL (UK) and LULI (France) Laboratories and were addressed to study the propagation of fast electrons (created by a short-pulse ultra-high-intensity beam) in compressed matter, created either by cylindrical implosions or by compression of planar targets by (planar) laser-driven shock waves. A more recent experiment was performed at PALS and investigated the laser-plasma coupling in the 1016 W/cm2 intensity regime of interest for Shock Ignition.
- 5 May 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8080, 808027
Experimental results performed in the framework of the HIPER European Project
This paper presents the goals and some of the results of experiments conducted within the Working Package 10 (Fusion Experimental Programme) of the HiPER Project. These experiments concern the study of the physics connected to "Advanced Ignition Schemes", i.e. the Fast Ignition and the Shock Ignition Approaches to Inertial Fusion. Such schemes are aimed at achieving a higher gain, as compared to the classical approach which is used in NIF, as required for future reactors, and making fusion possible with smaller facilities. In particular, a series of experiments related to Fast Ignition were performed at the RAL (UK) and LULI (France) Laboratories and were addressed to study the propagation of fast electrons (created by a short-pulse ultra-high-intensity beam) in compressed matter, created either by cylindrical implosions or by compression of planar targets by (planar) laser-driven shock waves. A more recent experiment was performed at PALS and investigated the laser-plasma coupling in the 1016 W/cm2 intensity regime of interest for Shock Ignition.
- 15 September 2010
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 165 (6-10) , 434-440
Study of laser-induced removal of co-deposits from tokamak plasma-facing components using ion diagnostics and optical spectroscopy
The paper presents studies of the application of ion diagnostics and optical spectroscopy for on-line measurement of the amount and characteristics of co-deposits from the laser-ablated surface of the plasma-facing components (e.g. graphite tiles). For removal of the co-deposit layer a repetitive Nd:YAG laser was used. Determination of the characteristics of ions emitted from the laser-illuminated targets was performed using ion collectors (on the basis of a time-of-flight method) and an optical spectrometer. The main ion stream parameters and spectral lines of deuterium and carbon or tungsten ions were measured depending on laser pulse parameters. The research proved that optical spectroscopy could be a convenient method for on-line observation of the co-deposited layer removal by means of laser ablation. In combination with the investigation of collected co-deposit dust, the performed study made it possible to state that laser-induced breakdown spectroscopy can be useful as a diagnostic method for the ablative co-deposited layer removal and the wall conditioning. The properties of modified surfaces of samples and collected dust (evaporated co-deposit) were determined using different measuring methods.
- 15 September 2010
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 165 (6-10) , 434-440
Study of laser-induced removal of co-deposits from tokamak plasma-facing components using ion diagnostics and optical spectroscopy
The paper presents studies of the application of ion diagnostics and optical spectroscopy for on-line measurement of the amount and characteristics of co-deposits from the laser-ablated surface of the plasma-facing components (e.g. graphite tiles). For removal of the co-deposit layer a repetitive Nd:YAG laser was used. Determination of the characteristics of ions emitted from the laser-illuminated targets was performed using ion collectors (on the basis of a time-of-flight method) and an optical spectrometer. The main ion stream parameters and spectral lines of deuterium and carbon or tungsten ions were measured depending on laser pulse parameters. The research proved that optical spectroscopy could be a convenient method for on-line observation of the co-deposited layer removal by means of laser ablation. In combination with the investigation of collected co-deposit dust, the performed study made it possible to state that laser-induced breakdown spectroscopy can be useful as a diagnostic method for the ablative co-deposited layer removal and the wall conditioning. The properties of modified surfaces of samples and collected dust (evaporated co-deposit) were determined using different measuring methods.
- 15 June 2009
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 390-391, 847-851
Spectroscopy of the tungsten plasma produced by pulsed plasma-ion streams or laser beams
- 15 June 2009
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 390-391, 847-851
Spectroscopy of the tungsten plasma produced by pulsed plasma-ion streams or laser beams
- 1 June 2008
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 163 (4-6) , 589-595
Applications of ions produced by low intensity repetitive laser pulses for implantation into semiconductor materials
This work reports experiment concerning specific applications of implantation of laser-produced ions for production of semiconductor nanocrystals. The investigation was carried out in the IPPLM within the EC STREP ‘SEMINANO’ project. A repetitive pulse laser system of parameters: energy up to 0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μ m, repetition rate of up to 10 Hz, has been employed in these investigations. The characterisation of laser-produced ions was performed with the use of ‘time-of-flight’ ion diagnostics simultaneously with other diagnostic methods in dependence on laser pulse parameters, illumination geometry and target material. The properties of laser-implanted and modified SiO2 layers on sample surface were characterised with the use of different methods (XPS + ASD, Raman spectroscopy, PL spectroscopy) at the Middle East Technological University in Ankara and at the Warsaw University of Technology. The production of the Ge nanocrystallites has been demonstrated for annealed samples prepared in different experimental conditions.
- 1 June 2008
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 163 (4-6) , 589-595
Applications of ions produced by low intensity repetitive laser pulses for implantation into semiconductor materials
This work reports experiment concerning specific applications of implantation of laser-produced ions for production of semiconductor nanocrystals. The investigation was carried out in the IPPLM within the EC STREP ‘SEMINANO’ project. A repetitive pulse laser system of parameters: energy up to 0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μ m, repetition rate of up to 10 Hz, has been employed in these investigations. The characterisation of laser-produced ions was performed with the use of ‘time-of-flight’ ion diagnostics simultaneously with other diagnostic methods in dependence on laser pulse parameters, illumination geometry and target material. The properties of laser-implanted and modified SiO2 layers on sample surface were characterised with the use of different methods (XPS + ASD, Raman spectroscopy, PL spectroscopy) at the Middle East Technological University in Ankara and at the Warsaw University of Technology. The production of the Ge nanocrystallites has been demonstrated for annealed samples prepared in different experimental conditions.
- 28 February 2007
- Published by Hindawi Limited in Laser and Particle Beams
- Vol. 25 (1) , 65-69
Application of pulsed laser deposition and laser-induced ion implantation for formation of semiconductor nano-crystallites
This work describes the application of laser ion source (LIS) for fabrication of semiconductor nanostructures, as well as relevant equipment completed and tested in the IPPLM for the EU STREP “SEMINANO” project and the obtained experimental results. A repetitive pulse laser system of parameters: energy of ∼0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μm, repetition rate of up to 10 Hz and intensity on the target of up to 1011 W/cm2, has been employed to produce Ge ions intended for ion implantation into SiO2 substrate. Simultaneously, laser-ablated material (atoms clusters debris) was deposited on the substrate surface. The parameters of the Ge ion streams (energy and angular distributions, charge states, and ion current densities) were measured with the use of several ion collectors and an electrostatic ion energy analyzer. The SiO2 films of thickness from 20–400 nm prepared on substrates of a single Si crystal were deposited and implanted with the use of laser-produced germanium of different properties. The modified SiO2 layers and sample surface properties were characterized with the use of different methods: X-ray photoelectron and Auger electron spectroscopy (XPS+AES), Raman scattering spectroscopy (RSS) and scanning electron microscopy (SEM). The production of the Ge nano-crystallites has been demonstrated for annealed samples prepared in different experimental conditions.
- 28 February 2007
- Published by Hindawi Limited in Laser and Particle Beams
- Vol. 25 (1) , 65-69
Application of pulsed laser deposition and laser-induced ion implantation for formation of semiconductor nano-crystallites
This work describes the application of laser ion source (LIS) for fabrication of semiconductor nanostructures, as well as relevant equipment completed and tested in the IPPLM for the EU STREP “SEMINANO” project and the obtained experimental results. A repetitive pulse laser system of parameters: energy of ∼0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μm, repetition rate of up to 10 Hz and intensity on the target of up to 1011 W/cm2, has been employed to produce Ge ions intended for ion implantation into SiO2 substrate. Simultaneously, laser-ablated material (atoms clusters debris) was deposited on the substrate surface. The parameters of the Ge ion streams (energy and angular distributions, charge states, and ion current densities) were measured with the use of several ion collectors and an electrostatic ion energy analyzer. The SiO2 films of thickness from 20–400 nm prepared on substrates of a single Si crystal were deposited and implanted with the use of laser-produced germanium of different properties. The modified SiO2 layers and sample surface properties were characterized with the use of different methods: X-ray photoelectron and Auger electron spectroscopy (XPS+AES), Raman scattering spectroscopy (RSS) and scanning electron microscopy (SEM). The production of the Ge nano-crystallites has been demonstrated for annealed samples prepared in different experimental conditions.
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 1111-1116
Ions from expanding laser plasmas
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 1111-1116
Ions from expanding laser plasmas
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 437-439
Fast ignition of precompressed fusion target by laser-driven plasma block: A concept and preliminary studies
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 437-439
Fast ignition of precompressed fusion target by laser-driven plasma block: A concept and preliminary studies
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 219-222
Plasma blocks from nonlinear force generated skin layer acceleration for ignition of a fusion flame in nearly uncompressed solid DT
Journal de Physique IV, Journal de Physique Archives représente une mine d informations facile à consulter sur la manière dont la physique a été publiée depuis 1872.
- 16 June 2006
- Published by EDP Sciences in Journal de Physique IV
- Vol. 133, 219-222
Plasma blocks from nonlinear force generated skin layer acceleration for ignition of a fusion flame in nearly uncompressed solid DT
Journal de Physique IV, Journal de Physique Archives représente une mine d informations facile à consulter sur la manière dont la physique a été publiée depuis 1872.