Stefano Cernuschi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stefano Cernuschi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Giovanni Lonati
Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milan, Italy
5 shared publications Michele Giugliano
2 shared publications- Senem Ozgen
LEAP s.c.a r.l., Via Nino Bixio 27,/C, Piacenza (PC), 29121, Italy
2 shared publications - Alberto Cambiaghi
BEA - Brianza Energia Ambiente SpA,Italy
1 shared publication Davide Faedo
1 shared publicationFrancesco Marzolo
D.I.I.A.R. — Sez. Ambientale, Politecnico di Milano, Piazza Leonardo da Vinci, 32-20133 Milano, Italy
1 shared publication
Latest Publications
- 5 October 2025
- Published by University of the Aegean
- Vol. 19
Multiyear monitoring of ultrafine particulate matter emissions from a modern full scale WtE plant at real operating condi-tions.
Monitoring campaigns for addressing quantitative and qualitative characteristics of emitted ultrafine and nano-particles during real operating conditions from waste to energy were performed on a modern plant with a specifi-cally designed instrumental protocol. Results are summa-rized for number concentrations and size distributions of particles during sampling conditions representative of both primary particles at stack flue gas and of those aris-ing from dilution and cooling techniques, for identifica-tion of variations theoretically expected immediately following immissions in the receiving atmosphere.
- 5 October 2025
- Published by University of the Aegean
- Vol. 19
Multiyear monitoring of ultrafine particulate matter emissions from a modern full scale WtE plant at real operating condi-tions.
Monitoring campaigns for addressing quantitative and qualitative characteristics of emitted ultrafine and nano-particles during real operating conditions from waste to energy were performed on a modern plant with a specifi-cally designed instrumental protocol. Results are summa-rized for number concentrations and size distributions of particles during sampling conditions representative of both primary particles at stack flue gas and of those aris-ing from dilution and cooling techniques, for identifica-tion of variations theoretically expected immediately following immissions in the receiving atmosphere.
- Open Access
- 23 March 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (4) , 516
Air Quality Impact Assessment of a Waste-to-Energy Plant: Modelling Results vs. Monitored Data
The impact of the emissions from a municipal Waste-to-Energy (WtE) plant in Northern Italy on local air quality was assessed using the CALMET-CALPUFF atmospheric dispersion modelling system. Model simulations were based on hourly emission rates measured by continuous stack monitoring systems and considered both air quality-regulated pollutants (nitrogen oxides, particulate matter, toxic elements, benzo(a)pyrene), and other trace pollutants typical of WtE plants (dioxins, furans, and mercury). The model results were compared to both long-term observations from the air quality monitoring network and with short-term measurements from dedicated monitoring campaigns in the vicinity of the WtE plant, in both warm and cold season conditions. Modelling and observational results showed that the estimated plant contributions are very limited. This suggests that the observed concentration levels were the result of the contribution of all the sources distributed over the area and that they were not solely driven by the activity of the plant. Estimated contributions from the plant’s emissions were usually at least two orders of magnitudes lower than the ambient levels at the nearest monitoring site and even lower at the farthest sites.
- 23 March 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (4) , 516
Open AccessAir Quality Impact Assessment of a Waste-to-Energy Plant: Modelling Results vs. Monitored Data
The impact of the emissions from a municipal Waste-to-Energy (WtE) plant in Northern Italy on local air quality was assessed using the CALMET-CALPUFF atmospheric dispersion modelling system. Model simulations were based on hourly emission rates measured by continuous stack monitoring systems and considered both air quality-regulated pollutants (nitrogen oxides, particulate matter, toxic elements, benzo(a)pyrene), and other trace pollutants typical of WtE plants (dioxins, furans, and mercury). The model results were compared to both long-term observations from the air quality monitoring network and with short-term measurements from dedicated monitoring campaigns in the vicinity of the WtE plant, in both warm and cold season conditions. Modelling and observational results showed that the estimated plant contributions are very limited. This suggests that the observed concentration levels were the result of the contribution of all the sources distributed over the area and that they were not solely driven by the activity of the plant. Estimated contributions from the plant’s emissions were usually at least two orders of magnitudes lower than the ambient levels at the nearest monitoring site and even lower at the farthest sites.
- Open Access
- 1 June 2019
- Published by Eurowaste SRL in Detritus
- Vol. 6, 77-84
THE ACTUAL IMPACT OF WASTE-TO-ENERGY PLANT EMISSIONS ON AIR QUALITY: A CASE STUDY FROM NORTHERN ITALY
- 1 June 2019
- Published by Eurowaste SRL in Detritus
- Vol. 6, 77-84
Open AccessTHE ACTUAL IMPACT OF WASTE-TO-ENERGY PLANT EMISSIONS ON AIR QUALITY: A CASE STUDY FROM NORTHERN ITALY
- 1 March 2012
- Published by Elsevier in Science of The Total Environment
- Vol. 420, 319-326
Number concentration and chemical composition of ultrafine and nanoparticles from WTE (waste to energy) plants
- 1 March 2012
- Published by Elsevier in Science of The Total Environment
- Vol. 420, 319-326
Number concentration and chemical composition of ultrafine and nanoparticles from WTE (waste to energy) plants
- Open Access
- 31 October 2011
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 61 (11) , 1273-1280
Pedestrian Exposure to Size-Resolved Particles in Milan
Measurement campaigns for airborne particles along a pedestrian route in the city center of Milan were performed by means of a portable instrument consisting of an optical particle counter and a global positioning system (GPS) signal receiver. Based on the size-resolved particle number concentration data and on proper density factors experimentally determined for Milan urban area, the mass concentrations were calculated in terms of particulate matter with aerodynamic diameters ≤10 μm (PM10), ≤2.5 μm (PM2.5), and ≤1 μm (PM1). Besides directly measuring the personal exposure to PM throughout the route, the measurement campaigns pointed out small spatial and temporal variations of the concentration ranges in the different urban microenvironments visited along the route as well as very peculiar features of the particles levels in the underground subway. These findings suggested that the personal exposure of pedestrians in the city center could be estimated by simply taking into account the exposure at the open air and in the subway. The comparison between measured and calculated exposures according to the microenvironment-based estimation results in reasonable accordance, even though the estimations tend to slightly underestimate (12%) the actual measured exposure.
- 31 October 2011
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 61 (11) , 1273-1280
Open AccessPedestrian Exposure to Size-Resolved Particles in Milan
Measurement campaigns for airborne particles along a pedestrian route in the city center of Milan were performed by means of a portable instrument consisting of an optical particle counter and a global positioning system (GPS) signal receiver. Based on the size-resolved particle number concentration data and on proper density factors experimentally determined for Milan urban area, the mass concentrations were calculated in terms of particulate matter with aerodynamic diameters ≤10 μm (PM10), ≤2.5 μm (PM2.5), and ≤1 μm (PM1). Besides directly measuring the personal exposure to PM throughout the route, the measurement campaigns pointed out small spatial and temporal variations of the concentration ranges in the different urban microenvironments visited along the route as well as very peculiar features of the particles levels in the underground subway. These findings suggested that the personal exposure of pedestrians in the city center could be estimated by simply taking into account the exposure at the open air and in the subway. The comparison between measured and calculated exposures according to the microenvironment-based estimation results in reasonable accordance, even though the estimations tend to slightly underestimate (12%) the actual measured exposure.
- 1 September 1998
- Published by Elsevier in Science of The Total Environment
- Vol. 220 (2-3) , 147-156
Development and application of statistical models for CO concentration and duration events in the Milan urban area
- 1 September 1998
- Published by Elsevier in Science of The Total Environment
- Vol. 220 (2-3) , 147-156
Development and application of statistical models for CO concentration and duration events in the Milan urban area