Mahmood Masoomi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahmood Masoomi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Seyed Mohammad Javad Razavi
Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU), Richard Birkelands vei 2b, 7491 Trondheim, Norway
4 shared publications Armin Hajibaba
Chemical Engineering Department (Polymer Group), Isfahan University of Technology, Isfahan, Iran
3 shared publicationsHossein Nazockdast
Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran
3 shared publicationsMohammad Asgari
Chemical Engineering Department Polymer Group Isfahan University of Technology Isfahan 84156‐83111 Iran
3 shared publicationsRouhollah Bagheri
Isfahan Univ Technol, Dept Chem Engn, Esfahan 8415683111, Iran
3 shared publications- Mohammad Mohammadalipour
Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
2 shared publications
Latest Publications
- 20 March 2018
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 541, 108-116
Facile strategy toward developing a scalable, environmental friendly and self-cleaning superhydrophobic surface
- 20 March 2018
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 541, 108-116
Facile strategy toward developing a scalable, environmental friendly and self-cleaning superhydrophobic surface
- 14 February 2018
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (21) , 2961-2972
The effect of simultaneous fiber surface treatment and matrix modification on mechanical properties of unidirectional ultra-high molecular weight polyethylene fiber/epoxy/nanoclay nanocomposites
Nonpolar structure of ultra-high molecular weight polyethylene fiber leads to a weak interfacial adhesion in ultra-high molecular weight polyethylene fiber reinforced epoxy composite. Herein, synchronized fiber and matrix modifications were utilized so as to improve the interfacial adhesion, resulting in promoting mechanical properties of these composites. For this purpose, the surface of ultra-high molecular weight polyethylene fiber was chemically treated with glycidyl methacrylate and the epoxy resin was modified through incorporation of different contents of nanoclay. The mechanical properties results showed that individual modification, either fiber or matrix, can just lead to improvements around 36.74% and 10.54% in tensile strength as well as 14.28% and 4.27% in tensile modulus, respectively. However, the ultimate outcome of the study revealed that much higher improvement can be achieved in synergistic attitude. The highest enhancement around 48.31% and 26.76% in tensile strength and modulus were seen for the sample containing glycidyl methacrylate-treated ultra-high molecular weight polyethylene fibers as reinforcement and nano epoxy modified with 1 wt.% of nanoclay. Such observation could be attributed to the mechanical interlocking and chemical reaction which were arising from incorporation of nanoclay in matrix and chemical treatment of fiber surface, correspondingly. In this regard, fiber roughness and chemical bonds formed between treated fiber and modified matrix play a key role in improving interfacial adhesion. Moreover, the fractured surface of such composites studied by scanning electron microscope confirmed the mechanical results and showed that much more matrix was adhered to the fiber surface after treatment, indicating cohesive failure.
- 14 February 2018
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (21) , 2961-2972
The effect of simultaneous fiber surface treatment and matrix modification on mechanical properties of unidirectional ultra-high molecular weight polyethylene fiber/epoxy/nanoclay nanocomposites
Nonpolar structure of ultra-high molecular weight polyethylene fiber leads to a weak interfacial adhesion in ultra-high molecular weight polyethylene fiber reinforced epoxy composite. Herein, synchronized fiber and matrix modifications were utilized so as to improve the interfacial adhesion, resulting in promoting mechanical properties of these composites. For this purpose, the surface of ultra-high molecular weight polyethylene fiber was chemically treated with glycidyl methacrylate and the epoxy resin was modified through incorporation of different contents of nanoclay. The mechanical properties results showed that individual modification, either fiber or matrix, can just lead to improvements around 36.74% and 10.54% in tensile strength as well as 14.28% and 4.27% in tensile modulus, respectively. However, the ultimate outcome of the study revealed that much higher improvement can be achieved in synergistic attitude. The highest enhancement around 48.31% and 26.76% in tensile strength and modulus were seen for the sample containing glycidyl methacrylate-treated ultra-high molecular weight polyethylene fibers as reinforcement and nano epoxy modified with 1 wt.% of nanoclay. Such observation could be attributed to the mechanical interlocking and chemical reaction which were arising from incorporation of nanoclay in matrix and chemical treatment of fiber surface, correspondingly. In this regard, fiber roughness and chemical bonds formed between treated fiber and modified matrix play a key role in improving interfacial adhesion. Moreover, the fractured surface of such composites studied by scanning electron microscope confirmed the mechanical results and showed that much more matrix was adhered to the fiber surface after treatment, indicating cohesive failure.
- 8 November 2017
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 5 (12) , 11362-11370
Superhydrophobic Surfaces Made from Naturally Derived Hydrophobic Materials
- 8 November 2017
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 5 (12) , 11362-11370
Superhydrophobic Surfaces Made from Naturally Derived Hydrophobic Materials
- 23 August 2017
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 40 (5) , 971-982
In-situ microfibrillar PP–PA6 composites: rheological, morphological and mechanical properties
- 23 August 2017
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 40 (5) , 971-982
In-situ microfibrillar PP–PA6 composites: rheological, morphological and mechanical properties
- 1 September 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 145, 891-898
Preparation and release study of Triclosan in polyethylene/Triclosan anti-bacterial blend
- 1 September 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 145, 891-898
Preparation and release study of Triclosan in polyethylene/Triclosan anti-bacterial blend
- 28 April 2016
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (31)
Interfacial evaluation of epoxy/carbon nanofiber nanocomposite reinforced with glycidyl methacrylate treated UHMWPE fiber
Interface interactions of fiber–matrix play a crucial role in final performance of polymer composites. Herein, in situ polymerization of glycidyl methacrylate (GMA) on the ultrahigh molecular weight polyethylene (UHMWPE) fibers surface was proposed for improving the surface activity and adhesion property of UHMWPE fibers towards carbon nanofibers (CNF)‐epoxy nanocomposites. Chemical treatment of UHMWPE fibers was characterized by FTIR, XPS analysis, SEM, and microdroplet tests, confirming that the grafting of poly (GMA) chains on the surface alongside a significant synergy in the interfacial properties. SEM evaluations also exhibited cohesive type of failure for the samples when both GMA‐treated UHMWPE fiber and CNF were used to reinforce epoxy matrix. Compared with unmodified composite, a ∼319% increase in interfacial shear strength was observed for the samples reinforced with both 5 wt % GMA‐grafted UHMWPE and 0.5 wt % of CNF. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43751.
- 28 April 2016
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (31)
Interfacial evaluation of epoxy/carbon nanofiber nanocomposite reinforced with glycidyl methacrylate treated UHMWPE fiber
Interface interactions of fiber–matrix play a crucial role in final performance of polymer composites. Herein, in situ polymerization of glycidyl methacrylate (GMA) on the ultrahigh molecular weight polyethylene (UHMWPE) fibers surface was proposed for improving the surface activity and adhesion property of UHMWPE fibers towards carbon nanofibers (CNF)‐epoxy nanocomposites. Chemical treatment of UHMWPE fibers was characterized by FTIR, XPS analysis, SEM, and microdroplet tests, confirming that the grafting of poly (GMA) chains on the surface alongside a significant synergy in the interfacial properties. SEM evaluations also exhibited cohesive type of failure for the samples when both GMA‐treated UHMWPE fiber and CNF were used to reinforce epoxy matrix. Compared with unmodified composite, a ∼319% increase in interfacial shear strength was observed for the samples reinforced with both 5 wt % GMA‐grafted UHMWPE and 0.5 wt % of CNF. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43751.
- 19 April 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (48) , 41793-41799
Interfacial shear strength characterization of GMA-grafted UHMWPE fiber/epoxy/nano clay hybrid nanocomposite materials
Interfacial properties of glycidyl methacrylate grafted ultra-high molecular weight polyethylene fibers and nano clay/epoxy resin were characterized by a microdroplet test.
- 19 April 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (48) , 41793-41799
Interfacial shear strength characterization of GMA-grafted UHMWPE fiber/epoxy/nano clay hybrid nanocomposite materials
Interfacial properties of glycidyl methacrylate grafted ultra-high molecular weight polyethylene fibers and nano clay/epoxy resin were characterized by a microdroplet test.
- 25 January 2016
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 25 (2) , 157-167
Compatibilization effectiveness of maleated polypropylene compared to organoclay in PBT/PP blends
- 25 January 2016
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 25 (2) , 157-167
Compatibilization effectiveness of maleated polypropylene compared to organoclay in PBT/PP blends
- 16 October 2015
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 30 (5) , 646-661
Morphology and rheological behavior of poly(butylene terephthalate)/polypropylene blends filled by two types of organoclays
The present research investigates the morphology and rheological behavior of poly(butylene terephthalate)/polypropylene (PBT/PP) blends containing hydrophilic and hydrophobic organoclays. The distribution of nanoclays and morphology of nanocomposites were analyzed using X-ray diffraction (XRD) and transmission and scanning electron microscopies. The XRD patterns show that the level of intercalation structure in nanocomposites reinforced by hydrophilic nanoclay is significantly higher than nanocomposites filled by hydrophobic one. According to morphological analysis, both types of nanocomposites indicate the reduction of droplet size, whereas hydrophilic nanoparticles illustrate more compatibilization efficiency than hydrophobic. According to transmission electron microscopy, hydrophilic nanoclays are mainly localized in the PBT matrix and at the interface, whereas hydrophobic nanoparticles are confined in the PP-dispersed phase and at the interface. From the rheological point of view, the results show that nanocomposites with hydrophilic nanoclay show stronger pseudoplasticity, higher viscosity, and more elasticity than nanocomposites with the hydrophobic one. The localization of hydrophilic organoclay in the PBT matrix aids to finer morphology of the PBT/PP blend, whereas hydrophobic one resists the breakup of droplets by confinement in dispersed phase.
- 16 October 2015
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 30 (5) , 646-661
Morphology and rheological behavior of poly(butylene terephthalate)/polypropylene blends filled by two types of organoclays
The present research investigates the morphology and rheological behavior of poly(butylene terephthalate)/polypropylene (PBT/PP) blends containing hydrophilic and hydrophobic organoclays. The distribution of nanoclays and morphology of nanocomposites were analyzed using X-ray diffraction (XRD) and transmission and scanning electron microscopies. The XRD patterns show that the level of intercalation structure in nanocomposites reinforced by hydrophilic nanoclay is significantly higher than nanocomposites filled by hydrophobic one. According to morphological analysis, both types of nanocomposites indicate the reduction of droplet size, whereas hydrophilic nanoparticles illustrate more compatibilization efficiency than hydrophobic. According to transmission electron microscopy, hydrophilic nanoclays are mainly localized in the PBT matrix and at the interface, whereas hydrophobic nanoparticles are confined in the PP-dispersed phase and at the interface. From the rheological point of view, the results show that nanocomposites with hydrophilic nanoclay show stronger pseudoplasticity, higher viscosity, and more elasticity than nanocomposites with the hydrophobic one. The localization of hydrophilic organoclay in the PBT matrix aids to finer morphology of the PBT/PP blend, whereas hydrophobic one resists the breakup of droplets by confinement in dispersed phase.
- 4 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (96) , 79200-79206
Preparation and investigation of mechanical and antibacterial properties of poly(ethylene terephthalate)/chitosan blend
The aim of this work was to evaluate the anti-bacterial and mechanical properties of chitosan based solvent-cast blends with synthetic poly(ethylene terephthalate) (PET). The amount of chitosan loading was varied from 1% to 9% (w/w). Chitosan and PET were homogeneously dissolved in a ternary solvent system with different mass ratios in a trifluoroacetic acid, chloroform, and acetic acid solution and processed into uniform films. Molecular interactions between chitosan and PET were investigated using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy. Morphology and tensile properties of these blend films were investigated. The antibacterial activity of the samples was evaluated utilizing the colony forming unit method against three typical human pathogenic microorganisms, Escherichia coli, Klebsiella pneumonia, and Staphylococcus aureus. The results indicated that the PET/chitosan films showed a significantly higher growth inhibition rate compared with the PET film. Chitosan release from a wide range of blends was studied using the ninhydrin method. The release tests revealed that dissolution of the biocide glucosamine groups, i.e. the chitosan water soluble fractions, also increased with the increase in the amount of chitosan content. Results obtained from ATR-FTIR spectra suggested that there exist pronounced interactions that probably resulted from hydrogen bond formation between different components. SEM micrographs showed that the compatibility of the two polymers was reduced when the fraction of chitosan was increased. Tensile strength and elongation at break of the blends reduced with the increase in chitosan content. These results indicated that the blends became brittle upon increasing the chitosan content.
- 4 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (96) , 79200-79206
Preparation and investigation of mechanical and antibacterial properties of poly(ethylene terephthalate)/chitosan blend
The aim of this work was to evaluate the anti-bacterial and mechanical properties of chitosan based solvent-cast blends with synthetic poly(ethylene terephthalate) (PET). The amount of chitosan loading was varied from 1% to 9% (w/w). Chitosan and PET were homogeneously dissolved in a ternary solvent system with different mass ratios in a trifluoroacetic acid, chloroform, and acetic acid solution and processed into uniform films. Molecular interactions between chitosan and PET were investigated using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy. Morphology and tensile properties of these blend films were investigated. The antibacterial activity of the samples was evaluated utilizing the colony forming unit method against three typical human pathogenic microorganisms, Escherichia coli, Klebsiella pneumonia, and Staphylococcus aureus. The results indicated that the PET/chitosan films showed a significantly higher growth inhibition rate compared with the PET film. Chitosan release from a wide range of blends was studied using the ninhydrin method. The release tests revealed that dissolution of the biocide glucosamine groups, i.e. the chitosan water soluble fractions, also increased with the increase in the amount of chitosan content. Results obtained from ATR-FTIR spectra suggested that there exist pronounced interactions that probably resulted from hydrogen bond formation between different components. SEM micrographs showed that the compatibility of the two polymers was reduced when the fraction of chitosan was increased. Tensile strength and elongation at break of the blends reduced with the increase in chitosan content. These results indicated that the blends became brittle upon increasing the chitosan content.