Khaled A. Al-Sallal

Skylights and windows are building openings that enhance human comfort and well-being in various ways. Recently, a massive drive is witnessed to replace traditional openings with building integrated photovoltaic (BIPV) systems to generate power in a bid to reduce buildings’ energy. The problem with most of the BIPV glazing lies in the obstruction of occupants’ vision of the outdoor view. In order to resolve this problem, new technology has emerged that utilizes quantum dots semiconductors (QDs) in glazing systems. QDs can absorb and re-emit the incoming radiation in the desired direction with the tunable spectrum, which renders them favorable for building integration. By redirecting the radiation towards edges of the glazing, they can be categorized as luminescent solar concentrators (QD-LSCs) that can help to generate electricity while maintaining transparency in the glazing. The aim of this paper is to review the different properties of core/shell quantum dots and their potential applications in buildings. Literature from various disciplines was reviewed to establish correlations between the optical and electrical properties of different types, sizes, thicknesses, and concentration ratios of QDs when used in transparent glazing. The current article will help building designers and system integrators assess the merits of integrating QDs on windows/skylights with regards to energy production and potential impact on admitted daylighting and visual comfort.

In the current study, a phase change material (PCM) contained in an insulated concrete block is tested in extremely hot weather in the United Arab Emirates (UAE) to evaluate its cooling performance. An insulated chamber is constructed behind the block containing PCM to mimic a scaled down indoor space. The effect of placement of the PCM layer on heat gain indoors is studied at two locations: adjacent to the outer as well as the inner concrete layer. The inclusion of PCM reduced heat gain through concrete blocks compared to blocks without PCM, yielding a drop in cooling load indoors. The placement of PCM and insulation layers adjacent to indoors exhibited better cooling performance compared to that adjacent to the outdoors. In the best case, a temperature drop of 8.5% and a time lag of 2.6 h are achieved in peak indoor temperature, rendering a reduction of 44% in the heat gain. In the tested hot climate, the higher ambient temperature and the lower wind speed hampered heat dissipation and PCM re-solidification by natural ventilation. The findings recommend employing a mechanical ventilation in hot climates to enhance regeneration of the PCM to solid state for its optimal performance.

The ability to simulate the effect of trees on natural light performance in buildings is contingent upon accurate simulation of light passing through the canopy. Accurate simulations require some assumption of leaf angle distribution (LAD) to compute canopy gap fractions. The ellipsoidal LAD can very closely approximate real plant canopies. The method requires calculation of leaf area density from observed distribution of gap fraction as a function of zenith angle. Two sets of Neem trees were studied (small and large). Hemispherical image acquisition and analysis for both groups was carried out to measure gap fractions. The results helped to develop a 3D tree model that was used to simulate the effect of tree interception of daylight. The illuminance levels were simulated under the tree model and the output results were validated against actual measurements using MBE and RMSE techniques (small trees: MBE = 0.33, RMSE = 0.20; large trees: MBE = 9.68, RMSE = 2.02).

The study focuses on analysis of visual performance and quality issues in classrooms located in the United Arab Emirates (UAE). The methodology depended on data collection and analysis of design information obtained from architectural drawings of standard schools, design compliance documents set by the relevant governmental bodies, and site visits and photography. It analyzed several important design issues that have significant impact on visual quality, including space size and depth to height ratio, windows orientation, lighting direction and desk position. It used simulation to investigate potential visual problems during critical times and view angles. Several problems concerning contrasting luminance levels in the field of view were identified and described. Mitigation of the problems using recommended daylighting systems was discussed based on the UAE climate.